Jebao JGP25000 6000GPH Water Pond Pump Instruction Manual
Муқаддима
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Jebao JGP25000 Water Pond Pump. Designed for versatility, this pump is suitable for various water features, including medium to large ponds and waterfalls. Please read these instructions thoroughly before use to ensure proper function and longevity of the product.
Маълумоти муҳим оид ба бехатарӣ
Please observe the following safety precautions to prevent injury or damage to the pump.
ОГОҲ: Хавфи зарбаи барқ
Connect the pump only to a properly grounded, grounding-type receptacle.
Install the pump only on a circuit protected by a Ground-Fault Circuit-Interrupter (GFCI).
This pump has not been investigated for use in swimming pools or marine areas. Do not use in these environments.
Огоҳӣ:
This pump is designed for use with water only.
DO NOT RUN DRY: Operating the pump without water can cause severe damage and void the warranty.
Ensure water temperature does not exceed 96°F (35.5°C).
Маҳсулот ба охир расидview
The Jebao JGP25000 is a high-performance water feature pump engineered for reliability and ease of use. It features a robust design suitable for continuous operation in various water garden applications.
Хусусиятҳои асосӣ:
Амалиёт бисёрҷониба: Designed for both submersible and in-line use.
Насби чандир: Capable of vertical or horizontal operation, ideal for skimmers.
Компонентҳои устувор: Features wear-resistant ceramic bearings and shaft for extended life.
Large Pre-filter: Reduces the frequency of cleaning by handling solids up to 3/4" diameter.
Муҳофизати изофабори гармӣ: Enhances safety and pump longevity.
Нигоҳдории осон: Quick and tool-free disassembly for cleaning.
Сими барқи дароз: Equipped with a 33 ft. power cord for flexible placement.
Image: The Jebao JGP25000 Water Pond Pump, showing its compact black housing, threaded outlet, and power cord connection. This image provides a general view of the pump's design.
Дастурҳои насб
1. Кушодан ва тафтиш
Carefully remove the pump from its packaging.
Inspect the pump for any signs of damage during transit. Do not use if damaged.
Боварӣ ҳосил кунед, ки ҳама ҷузъҳо мавҷуданд.
2. Имконоти ҷойгиркунӣ
The JGP25000 pump offers flexible installation:
Submersible Installation: Place the pump directly into the pond or water feature. Ensure it is fully submerged and rests on a stable, level surface.
Насбкунии дарунсохт: The pump can be installed outside the water feature, connected via appropriate plumbing.
Самт: The pump can be positioned vertically or horizontally, accommodating various setups, including skimmers.
3. Connecting Plumbing
Attach appropriate tubing or piping to the pump's outlet. Ensure all connections are secure and watertight to prevent leaks.
Шлангро истифода баред clamps or thread sealant as necessary for a tight seal.
4. Пайвасти барқӣ
Before connecting to power, ensure the pump is correctly installed and submerged (if applicable).
Plug the 33 ft. power cord into a properly grounded, GFCI-protected electrical outlet.
Avoid using extension cords if possible. If an extension cord is necessary, ensure it is rated for outdoor use and capable of handling the pump's wattagд (520 ватт).
Дастурҳои амалиётӣ
1. Оғози ибтидоӣ
Ensure the pump is fully submerged in water or primed if used in an in-line setup. Ҳеҷ гоҳ насосро хушк накунед.
Connect the pump to the power supply. The pump should start immediately.
Check for proper water flow and any unusual noises.
2. Фаъолияти пайваста
The Jebao JGP25000 is designed for continuous operation. Monitor water levels regularly to ensure the pump remains submerged and to prevent dry running.
For extended periods of non-use, especially during freezing temperatures, remove the pump from the water, clean it, and store it in a dry, frost-free location.
Нигоҳдорӣ
Regular maintenance ensures optimal performance and extends the life of your pump. The JGP25000 is designed for easy, tool-free disassembly for cleaning.
1. Тоза кардани филтри пешакӣ
Disconnect the pump from the power supply before performing any maintenance.
Remove the pump from the water or its in-line setup.
Disassemble the pre-filter housing (typically by unlatching or unscrewing components by hand).
Rinse the pre-filter and impeller chamber thoroughly with clean water to remove debris, algae, and sediment.
Inspect the impeller for any blockages or damage.
Насосро аз нав васл кунед ва боварӣ ҳосил кунед, ки ҳамаи қисмҳо боэътимод васл шудаанд.
2. Зимистонгузаронӣ
Before freezing temperatures arrive, remove the pump from the water.
Clean the pump thoroughly as described above.
Store the pump in a dry, frost-free location to prevent damage from ice expansion.
Мушкилкушо
Мушкилот
Сабаби эҳтимолӣ
Ҳалли
Насос оғоз намешавад ё мунтазам кор мекунад.
No power; GFCI tripped; Impeller jammed; Thermal overload activated.
Check power connection and GFCI. Disconnect power, clean impeller chamber. Allow pump to cool if thermal overload tripped.
Кам шудани ҷараёни об.
Clogged pre-filter or impeller; Kinked tubing; Low water level.
Disconnect power, clean pre-filter and impeller. Check tubing for obstructions. Ensure adequate water level.
Садо ё ларзиш аз ҳад зиёд.
Debris in impeller; Pump not stable; Worn bearings.
Disconnect power, clean impeller. Ensure pump is on a stable surface. If noise persists, contact support.
Pump runs dry.
Сатҳи нокифояи об.
Immediately disconnect power. Refill water feature. Inspect pump for damage before restarting.
If troubleshooting steps do not resolve the issue, please contact Jebao customer support.
Мушаххасоти техникӣ
Рақами модел
JGP25000
Меъёри максималии ҷараён
6,000 GPH (Галлон дар як соат)
Баландии ҳадди аксар
25 фут.
Ватtage
520 ватт
Ҷилдиtage
110В
Манбаи нерӯ
AC (Ҷараёни алтернативӣ)
Дарозии сими барқ
33 фут.
Max Solids Handling
Up to 3/4" diameter
Ҳарорати максималии об
96°F (35.5°C)
Вазни ашё
12 фунт
Услуб
Submersible / In-line
Кафолат ва дастгирӣ
Кафолати истеҳсолкунанда
The Jebao JGP25000 Water Pond Pump is backed by a Кафолати 1-солаи истеҳсолкунанда аз рӯзи харид. Ин кафолат нуқсонҳои мавод ва коркардро ҳангоми истифодаи муқаррарӣ фаро мегирад. Лутфан далели хариди худро барои даъвоҳои кафолат нигоҳ доред.
The warranty does not cover damage caused by misuse, improper installation, running the pump dry, freezing, or unauthorized modifications.
Дастгирии муштариён
For technical assistance, warranty inquiries, or replacement parts, please contact Jebao customer support:
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.