Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater User Manual

1. Муқаддима

This manual provides essential information for the safe and efficient operation of your Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater. This natural gas heater delivers 39,800 BTU/hour of direct heat, designed to warm outdoor living spaces effectively. Please read all instructions carefully before installation and use.

Расми 1: Пеш view of the Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater.

2. Маълумоти муҳим оид ба бехатарӣ

Огоҳӣ: Насбкунӣ, танзим, тағирот, хидматрасонӣ ё нигоҳдории номувофиқ метавонад осеб ё хисороти молиро ба бор орад. Пеш аз насб кардан ё хидматрасонии ин таҷҳизот дастурҳои насб, истифода ва нигоҳдории онро бодиққат хонед.

• Ҳангоми кор кардани гармкунак вентилятсияи дурустро таъмин кунед.
• Бензин ё дигар буғҳо ва моеъҳои оташгирандаро дар наздикии ин ё ягон асбоби дигар нигоҳ надоред ё истифода набаред.
• Ҳангоми кор кӯдакон ва ҳайвонотро аз гармкунак дур нигоҳ доред.
• Maintain clear distances from combustible materials as specified in the installation section.
• Ин маҳсулот дорои кимиёвӣ мебошад, ки ба иёлати Калифорния маълум аст, ки боиси саратон ва нуқсонҳои таваллуд ё дигар зарари репродуктивӣ мегардад. (Пешниҳоди 65 Огоҳӣ)

3. Хусусиятҳои маҳсулот

• Sleek Contemporary Styling: Features brushed stainless steel and tinted ceramic glass for an aesthetic design.
• Radiant Infrared Burner: Heats up quickly, providing direct heat to warm individuals in the area.
• Муқовимат ба шамол: Designed to operate effectively in winds up to 12 miles per hour for consistent heating.
• Кронштейн васлшавандаи танзимшаванда: The wall bracket houses the control system away from heat and allows the heater head to pivot 25-degrees to the left and right of center for directional heat.
• Аризаи бисёрҷониба: Suitable for both residential and commercial installations.
• Automatic Reignition: Provides continuous heat and convenience.
• Сохтмони устувор: Made of stainless steel with a brushed finish.
• Системаи оташгирии электронӣ: Requires 120V for operation.

Figure 2: The sleek design of the Bromic Platinum 500 heater.

4. Насбкунӣ

Installation of the Bromic Smart-Heat Platinum 500 heater should be performed by a qualified and licensed professional in accordance with local codes and regulations.

4.1 Имкониятҳои васлкунӣ

The heater offers flexible mounting options:

• Ба девор насбшуда: Utilize the provided mounting bracket. The bracket allows the heater to pivot 25 degrees left or right.
• Ceiling Suspended: Can be hung from the ceiling using an optional Ceiling Post Mount (not included).

The optimum mounting height is 8 feet from the floor to the bottom of the heater. If the distance above the heater is less than 42 inches, or if the heater will be exposed to elements, an accessory Heat Deflector must be used.

Расми 3: Тараф view illustrating the mounting bracket and design.

4.2 Пайвастҳои газ ва барқ

• Connect to a natural gas supply. All gas connections must comply with local codes.
• The electronic ignition system requires a 120V electrical supply. Ensure proper grounding.

5. Дастурҳои истифодабарӣ

5.1 Ба кор андохтани гармкунак

1. Боварӣ ҳосил кунед, ки клапани таъминоти газ кушода аст.
2. Activate the electronic ignition system (requires 120V). The heater features automatic reignition.
3. Allow a few minutes for the radiant elements to reach full operating temperature.

5.2 Adjusting Heat Direction

The mounting bracket allows the heater head to pivot 25 degrees to the left or right. Carefully adjust the heater's angle to direct heat to your desired area. Ensure the heater is cool before making physical adjustments.

5.3 Хомӯш кардани гармкунак

1. Deactivate the electronic ignition system.
2. Close the main gas supply valve if the heater will not be used for an extended period.

6. Нигоҳдорӣ

Regular maintenance ensures optimal performance and longevity of your heater. Always ensure the heater is completely cool and the gas supply is turned off before performing any maintenance.

• Тозакунӣ: Periodically clean the exterior surfaces with a soft, damp матоъ. Тозакунанда ё ҳалкунандаҳои абразивиро истифода набаред.
• Шишаи сафолӣ: The tinted ceramic glass should be inspected for cracks or damage. Clean gently if necessary.
• Санҷиши сӯзишворӣ: Annually, have a qualified technician inspect the burner and gas connections for any blockages or wear.
• Heat Deflector: If an optional heat deflector is installed, ensure it is free from debris.

7. Баррасии мушкилот

If you encounter issues with your heater, refer to the following common troubleshooting steps. For complex problems, contact a qualified service technician.

7.1 Heater Not Igniting

• Check if the natural gas supply valve is fully open.
• Verify that the 120V electrical supply for the electronic ignition is active.
• Ensure there are no obstructions around the burner.

7.2 Истеҳсоли гармии нокифоя

• Confirm the heater is positioned correctly to direct heat to the desired area.
• Check for strong winds exceeding 12 mph, which can reduce heating effectiveness.
• Ensure the area is within the recommended heating coverage of 200 square feet.

8. Мушаххасоти

Figure 4: Dimensional drawing of the heater.

9. Кафолат ва дастгирӣ

For warranty information and customer support, please refer to the documentation included with your product or visit the official Bromic Heating webсайт. Квитансияи хариди худро барои даъвоҳои кафолат нигоҳ доред.