Stayer SCE 1650 WMC Miter Saw User Manual

1. Муқаддима

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Stayer SCE 1650 WMC Miter Saw. This versatile tool is designed for precise cutting of various materials including iron, aluminum, plastic, and wood. Please read this manual thoroughly before initial use and keep it for future reference.

2. Дастурамал оид ба бехатарӣ

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury.

• Ҳама дастурҳоро хонед: Familiarize yourself with the tool's controls and proper use.
• Муҳофизати чашмро пӯшед: Ҳамеша айнакҳои муҳофизатӣ ё айнакҳои муҳофизатӣ бо сипарҳои тарафӣ пӯшед.
• Ҳифзи шунавоӣ: Пӯшед Use earplugs or earmuffs during operation.
• Корти бехатар: Ҳамеша клamp ё ба таври дигар қисмати корро маҳкам кунед, то ҳангоми буридан ҳаракат накунад.
• Дастҳоро тоза нигоҳ доред: Never place hands near the cutting blade.
• Минтақаи кори тозаро нигоҳ доред: Ҷойҳои бесарусомон ба садамаҳо даъват мекунанд.
• Дар атмосфераи тарканда кор накунед: Асбобхои электрикиро дар мав-чудияти моеъхои оташгиранда ва газхо истифода набаред.
• Пеш аз танзимот ҷудо кунед: Always disconnect the saw from the power source before making any adjustments, changing accessories, or performing maintenance.
• Use the Correct Blade: Ensure the blade is appropriate for the material being cut and is sharp and undamaged.
• Аз ҳад зиёд даст кашед: Ҳамеша пойҳои дуруст ва мувозинатро нигоҳ доред.

3. Маҳсулот ба охир расидview

The Stayer SCE 1650 WMC is a robust miter saw featuring a durable aluminum base and upper table. It includes an electronic speed variator for optimized cutting across different materials.

Расми 1: Барview of the Stayer SCE 1650 WMC Miter Saw. This image shows the complete miter saw unit, highlighting its red base, silver cutting table, and the main motor housing with the blade guard. The adjustable fence and clamping mechanisms are also visible.

Компонентҳои асосӣ:

• Aluminum Base and Upper Table: Provides stability and durability.
• Electronic Variator: Allows adjustment of blade speed.
• Механизми гардиш: Enables bevel cuts up to 45°.
• Swiveling Table: Features self-locking positions for miter cuts at 22.5°, 45°, and 90°.
• Порти истихроҷи чанг: For connecting a dust collection system.

4. Танзимот

Before operating the miter saw, ensure it is properly set up and secured.

1. Кушодани: Carefully remove all components from the packaging. Verify that all included items are present: SCE 1650 WMC miter saw, Widia TCT Z-52 blade, parallel guide, 2 horizontal clamps, and service wrench.
2. Монтаж: Securely mount the miter saw to a stable workbench using appropriate fasteners.
3. Насбкунии чӯб: Ensure the Widia TCT Z-52 blade (Ø 254 x 3 x 30 mm) is correctly installed and tightened according to the instructions provided with the blade. Always unplug the saw before installing or changing blades.
4. Parallel Guide and Clamps: Install the parallel guide and horizontal clamps as needed for your specific cutting task to secure the workpiece.
5. Истихроҷи чанг: Connect a suitable dust extraction system to the designated port to maintain a clean work environment.

5. Дастурҳои истифодабарӣ

The Stayer SCE 1650 WMC is designed for precise cuts in various materials. Always ensure the workpiece is stable and secured before cutting.

5.1. Идоракунии қувват ва суръат

• The saw operates at 1600W power.
• Use the electronic variator to adjust the no-load speed between 2500 and 4000 RPM (Giri/min) depending on the material being cut. Lower speeds are generally suitable for harder materials or larger cuts, while higher speeds are for softer materials or finer finishes.

5.2. Буридан

1. Straight Cuts (0°): Position the workpiece against the fence. Ensure the swiveling table is locked at 0°. Maximum cutting capacity: 50 x 100 mm.
2. Miter Cuts (Angled Horizontal Cuts): Adjust the swiveling table to the desired angle (e.g., 22.5°, 45°). The table has self-locking positions for common angles. Maximum cutting capacity at 45°: 32 x 100 mm.
3. Bevel Cuts (Angled Vertical Cuts): Tilt the saw head up to 45° to the left or right. Maximum cutting capacity at 45° inclined: 150 x 20 mm or 90 x 50 mm.
4. Compound Cuts (Miter and Bevel): Combine miter and bevel adjustments for complex angles. Maximum cutting capacity at 45° miter and 45° bevel: 75 x 20 mm.
5. General Cutting Capacity:
   • 90° (Straight): 155 x 25 mm / 65 x 77 mm
   • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
   • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
   • 45° Compound (Miter & Bevel): 75 x 20 mm
6. Амалиёт: Lower the blade slowly into the workpiece, allowing the blade to reach full speed before contact. Apply steady, even pressure. Once the cut is complete, allow the blade to stop rotating before raising it from the workpiece.

6. Нигоҳдорӣ

Regular maintenance ensures the longevity and safe operation of your Stayer SCE 1650 WMC Miter Saw. Always unplug the tool before performing any maintenance.

• Тозакунӣ: Regularly clean dust and debris from the saw, especially around the motor vents, blade guard, and cutting table. Use compressed air for hard-to-reach areas.
• Санҷиши пиёз: Inspect the blade before each use for sharpness, cracks, or missing teeth. Replace dull or damaged blades immediately.
• Brush Inspection: The motor uses brushes. Periodically inspect the carbon brushes for wear and replace them when they are worn down to their limit. Refer to a qualified service technician if unsure.
• Молидани: Apply light machine oil to moving parts and pivot points as recommended in a more detailed service manual (if available) or as needed to ensure smooth operation.
• Санҷиши бастабандӣ: Ба таври даврӣ ҳамаи гайкаҳо, болтҳо ва винтҳоро аз ҷиҳати маҳкамӣ тафтиш кунед. Ҳама гуна мустаҳкамкунакҳои фуҷурро маҳкам кунед.

7. Баррасии мушкилот

Ин бахш масъалаҳои маъмулеро, ки шумо метавонед бо арраи miter-и худ дучор шавед, баррасӣ мекунад.

8. Мушаххасоти

Technical specifications for the Stayer SCE 1650 WMC Miter Saw:

• Модели: SCE1650WMC
• Қувва: 1600 В
• Ҷилдиtage: 230 волт (AC)
• Суръати бебор: 2500 – 4000 RPM (Giri/min)
• Диаметри тир: Ø 254мм
• Бори тела: 30 мм
• Маводҳои чӯб: Tungsten Carbide (Widia TCT Z-52)
• Манбаи нерӯ: Электри симдор
• Вазн: 16.5 кг
• Cutting Capacity (Max):
  • 90° (Straight): 155 x 25 mm / 65 x 77 mm
  • 45° Right/Left (Miter): 103 x 30 mm / 55 x 77 mm
  • 45° Inclined (Bevel): 150 x 20 mm / 90 x 50 mm
  • 45° Compound (Miter & Bevel): 75 x 20 mm

9. Кафолат

STAYER products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official STAYER webсайт барои шартҳо ва шартҳои кафолати муфассал. Барои даъвоҳои кафолат далели хариди худро нигоҳ доред.

10. Дастгирӣ

For technical assistance, spare parts, or service inquiries, please contact your local STAYER dealer or authorized service center. You can also visit the official STAYER website for further support information and contact details.

Webсайт: www.stayer.es (Хурampле, воқеӣ URL метавонад фарқ кунад)