M-Wave M30HCW Bicycle Computer

1. Муқаддима

Thank you for choosing the M-Wave M30HCW Wireless Bicycle Computer. This device is designed to enhance your cycling experience by providing comprehensive data about your rides. It features wireless transmission for a clean setup and a wide range of functions to track your performance and progress. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your device.

Image 1.1: M-Wave M30HCW Bicycle Computer. This image displays the main unit of the M-Wave M30HCW bicycle computer, showcasinтарҳи паймон ва намоиши равшани он.

2. Маълумот оид ба бехатарӣ

• Always prioritize road safety. Do not operate the computer or adjust settings while cycling in traffic.
• Ensure the computer is securely mounted to prevent it from detaching during your ride.
• Батареяҳоро аз дастрасии кӯдакон дур нигоҳ доред. Агар фурӯ бурда шавад, фавран ба ёрии тиббӣ муроҷиат кунед.
• Батареяҳоро мувофиқи қоидаҳои маҳаллӣ партов кунед. Сӯзон накунед.
• The device has an Ingress Protection rating of IP44, meaning it is protected against splashing water from any direction. It is not designed for submersion.

3. Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳама ашё дар баста мавҷуд аст:

• M-Wave M30HCW Cyclocomputer Unit
• Wireless Speed/Cadence Sensor
• Магнити чарх
• Mounting Bracket (for handlebar or stem)
• Mounting Ties/Bands
• CR2 Batteries (4 required, included)

4. Танзимот

4.1. Насби батарея

1. Open the battery compartment on the back of the cyclocomputer unit and the wireless sensor.
2. Insert the CR2 batteries, ensuring correct polarity (+/-).
3. Қисмҳои батареяро бехатар пӯшед.

4.2. Mounting the Cyclocomputer

The M-Wave M30HCW features tool-free mounting for quick installation.

1. Attach the mounting bracket to your bicycle's handlebar or stem using the provided ties or bands. Ensure it is firmly secured and positioned for easy viewing.
2. Slide the cyclocomputer unit onto the mounting bracket until it clicks into place.

4.3. Mounting the Wireless Sensor and Magnet

1. Attach the wireless sensor to the front fork of your bicycle, ensuring it is aligned with the wheel spokes.
2. Mount the wheel magnet to a spoke on the front wheel. Position the magnet so it passes within 5mm of the sensor as the wheel rotates.
3. Ensure the sensor and magnet are securely fastened and do not interfere with wheel rotation or braking.

4.4. Танзимоти ибтидоӣ

After battery installation, the computer will typically prompt you for initial settings. Use the buttons (usually MODE and SET) to navigate and confirm selections.

• Воҳидҳо: Select between metric (km/h, km) and imperial (mph, miles) units.
• Андозаи чарх: Input your wheel circumference in millimeters (mm). Refer to your bicycle tire for this value or measure it accurately. This is crucial for accurate speed and distance readings.
• Вақт: Set the current time (24-hour or 12-hour format).
• Вазн: Enter your body weight for calorie calculation.

5. Дастурҳои истифодабарӣ

The M-Wave M30HCW features an LED backlit display for easy reading and is operated via buttons, typically located on the front or bottom of the unit.

5.1. Вазифаҳои асосӣ

The computer automatically powers on and off. When you start cycling, it will activate and begin recording data. When stationary, it will enter a power-saving mode.

• Суръати ҷорӣ: Суръати велосипедронии шуморо дар вақти воқеӣ нишон медиҳад.
• Суръати миёна: Shows the average speed for your current ride.
• Суръати максималӣ: Records the highest speed achieved during your ride.
• Масофаи сафар: Measures the distance covered in the current ride.
• Одометр: Tracks the total accumulated distance.
• Вақти сафар: Records the duration of your current ride.
• Каденс: Measures your pedaling revolutions per minute (RPM).
• Алтиметр: Provides altitude measurements for climb tracking.
• Heart Rate Monitor/Alarm: (If applicable, requires compatible HR sensor, not included with base unit) Monitors heart rate and can alert if thresholds are exceeded.
• Истеъмоли калория: Estimates calories burned based on ride data and user weight.
• Термометр: Ҳарорати муҳити атрофро нишон медиҳад.

5.2. Амали тугма

Typically, the computer will have one or two buttons for navigation and selection:

• Тугмаи MODE: Press briefly to cycle through different display modes (e.g., speed, distance, time). Press and hold to enter settings or reset trip data.
• Тугмаи SET: Used to confirm selections or adjust values within settings menus.

Refer to the on-screen prompts for specific button functions during setup and operation.

6. Нигоҳдорӣ

• Тозакунӣ: Wipe the computer unit and sensor with a soft, damp матоъ. Тозакунанда ё ҳалкунандаҳои абразивиро истифода набаред.
• Муқовимат ба об: The device is IP44 rated, protecting it from splashing water. Avoid high-pressure washing or submerging the unit.
• Иваз кардани батарея: Replace batteries when the low battery indicator appears on the display. Ensure proper battery type and polarity.
• Нигоҳдорӣ: If storing the bicycle for an extended period, remove the batteries from the computer and sensor to prevent leakage.

7. Баррасии мушкилот

8. Мушаххасоти

9. Кафолат ва дастгирӣ

For warranty information and technical support, please refer to the documentation provided with your purchase or contact M-Wave customer service directly. Keep your proof of purchase for any warranty claims.