VIVO Full Motion Ultrawide Monitor Wall Mount

1. Муқаддима

Thank you for choosing the VIVO MOUNT-VW01M Full Motion Ultrawide Monitor Wall Mount. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new wall mount. Please read this manual thoroughly before installation and keep it for future reference.

This wall mount is designed to securely hold ultrawide monitors up to 49 inches and weighing up to 44 lbs (20 kg). It features full motion capabilities including tilt, swivel, and extension, allowing for optimal viewing angles and space efficiency.

2. Маълумот оид ба бехатарӣ

Огоҳӣ: Failure to read and follow all instructions, warnings, and cautions in this manual may result in serious personal injury, property damage, or voiding of your warranty.

• Иқтидори максималии вазнро аз 44 фунт (20 кг) зиёд накунед.
• Ensure the mounting surface (wall) can safely support the combined weight of the mount and the monitor.
• Use appropriate mounting hardware for your wall type (wood stud, concrete, brick, etc.). If unsure, consult a qualified professional.
• Always have at least two people for installation to prevent injury or damage.
• Ҳангоми насб кӯдакон ва ҳайвонотро аз дур нигоҳ доред.
• Check all connections and fasteners periodically to ensure they remain secure.

3. Мундариҷаи баста

Please verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact VIVO customer support.

The package includes the wall mount assembly and all necessary hardware for installation, including various screws for monitor attachment and wall mounting.

Тасвир: тамомview of the VIVO MOUNT-VW01M wall mount and its components.

4. Мушаххасоти

Image: Detailed dimensions and weight capacity of the MOUNT-VW01M.

Image: Visual representation of screen compatibility and VESA standards supported.

5. Танзим ва насб

Before installation, ensure you have the necessary tools (e.g., drill, stud finder, level, screwdriver) and understand your wall type.

Қадами 5.1: Деворро омода кунед

1. Ҷойгир кардани Studs: For wood stud walls, use a stud finder to locate the center of the wood studs. Mark the desired mounting height.
2. Нуқтаҳои пармакунӣ қайд кунед: Hold the wall plate against the wall at the desired height and use a pencil to mark the drilling locations. Ensure the plate is level using a spirit level.
3. Сӯрохиҳои пилотӣ парма кунед: Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the provided lag bolts.

Қадами 5.2: Пластинаи девориро часпонед

1. Align the wall plate with the drilled pilot holes.
2. Secure the wall plate to the wall using the provided lag bolts and washers. Tighten firmly, but do not overtighten.

Қадами 5.3: Plate VESA-ро ба монитор замима кунед

1. Мониторро бодиққат рӯи поён ба рӯи сатҳи нарм ва тоза гузоред.
2. Identify the VESA mounting holes on the back of your monitor.
3. Select the appropriate screws (M4, M5, M6, M8) and spacers from the provided hardware kit that fit your monitor's VESA holes.
4. Attach the VESA plate (the part of the mount that connects to the monitor) to the back of your monitor using the selected screws and spacers. Ensure it is securely fastened.

Step 5.4: Mount Monitor to Wall Plate

1. With assistance, carefully lift the monitor with the attached VESA plate.
2. Align the VESA plate with the arm extending from the wall plate and slide it into place.
3. Secure the monitor to the arm using the locking screws or mechanisms provided on the mount. Refer to the specific locking mechanism on your mount.

Image: The VIVO MOUNT-VW01M wall mount securely holding an ultrawide monitor.

6. Фаъолият ва танзимот

Once installed, the MOUNT-VW01M allows for various adjustments to achieve your desired viewкунҷ ва мавқеъ.

6.1 Танзими чархиш

The monitor can be tilted +5° upwards and -12° downwards to reduce glare and optimize viewing comfort. Loosen the tilt adjustment knob/bolt on the VESA plate, adjust the angle, and then re-tighten to secure.

6.2 Танзими гардиш

The mount allows for a ±45° swivel (left and right) from the wall, providing flexibility for different viewing positions within a room.

Image: Demonstrates the tilt and swivel capabilities of the mount.

6.3 Тамдид ва бозпас гирифтан

The articulating arm allows the monitor to extend up to 10.5 inches (26.7 cm) from the wall or collapse flat to 1.75 inches (4.4 cm) for a low-profile намуди зоҳирӣ.

Image: Shows the monitor mount extended to its maximum distance from the wall.

6.4 Идоракунии кабел

The mount features integrated cable management clips along the arm. Route your monitor and power cables through these clips to maintain a clean and organized setup.

Image: Close-up of the integrated cable management clips on the mount arm.

7. Нигоҳдорӣ

• Тозакунӣ: нармро истифода баред, гamp cloth to clean the mount. Avoid harsh chemicals or abrasive cleaners.
• Санҷиши бастабандӣ: Periodically (e.g., every 6 months) check all screws and bolts to ensure they are securely tightened. Loose fasteners can lead to instability.
• Санҷиши ҳаракат: Боварӣ ҳосил кунед, ки ҳама буғумҳои артикулярӣ ба осонӣ ҳаракат мекунанд. Агар ягон буғум сахт шавад, ба миқдори ками молиданӣ дар асоси силикон молед (равғанҳои молиданиро истифода набаред).

8. Баррасии мушкилот

Issue: Monitor is wobbly or not holding position.

Ҳалли:

• Check all mounting screws on the wall plate and the VESA plate. Ensure they are tightened securely.
• Verify that the monitor's weight does not exceed the mount's maximum capacity (44 lbs / 20 kg).
• Ensure the wall type is appropriate for the mount and that the wall anchors (if used) are properly installed and secure.
• For tilt adjustments, ensure the tilt knob/bolt is sufficiently tightened after positioning the monitor.

Issue: Mount arm is difficult to move.

Ҳалли:

• The joints may require lubrication. Apply a small amount of silicone-based lubricant to the pivot points.
• Ensure no cables are snagged or obstructing the movement of the arm.

9. Кафолат ва дастгирӣ

VIVO products are designed for quality and durability. For specific warranty details, please refer to the product packaging or the official VIVO website. In general, VIVO offers a return policy for refund or replacement within 30 days of purchase.

If you encounter any issues or have questions regarding your VIVO MOUNT-VW01M, please contact VIVO customer support. Our U.S.-based support team is available to assist you.

For the latest information and support, visit the official VIVO webсайт: vivo-us.com