1. Маҳсулот ба охир расидview
The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.
Хусусиятҳои асосӣ:
- Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
- Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
- Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
- Иқтидори буриш: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
- Муҳофизати бехатарӣ: A protective guard for the cutting disc ensures user safety from chips and dust.
2. Дастурамал оид ба бехатарӣ
Ҳамеша ҳама огоҳиҳои бехатарӣ, дастурҳо, тасвирҳо ва мушаххасоти бо ин асбоби барқӣ додашударо хонед ва бифаҳмед. Риоя накардани ҳамаи дастурҳои дар поён овардашуда метавонад боиси зарбаи барқ, сӯхтор ва/ё ҷароҳати вазнин гардад.
Огоҳӣ оид ба бехатарии умумӣ:
- Wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, and gloves.
- Боварӣ ҳосил кунед, ки майдони корӣ тоза, равшан ва аз монеаҳо холӣ аст.
- Ҳангоми истифода бурдани асбоб кӯдакон ва одамони наздикро аз дур нигоҳ доред.
- Never operate the tool if the power cord or plug is damaged.
- Always disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
- Барои маводе, ки бурида мешавад, теғи дурустро истифода баред.
- Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.
3. Компонентҳо барview
Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:
- Cutting Table (Stainless Steel)
- Diamond Cutting Disc (180 mm diameter)
- Воҳиди мотор
- Обанбори об
- Cutting Guide with Scale
- Angle Stop (-45° to +45°)
- Гвардияи Blade
- Гузариш / Хомӯш
- Дастаки бардоштан
Расми 1: Зиёдview of the Einhell TC-TC 800 Tile Cutter with its main parts.
4. Танзимот
Before operating the tile cutter, ensure proper setup for safety and optimal performance.
4.1 Кушодан ва тафтиш
- Ҳама ҷузъҳоро аз бастабандӣ бодиққат хориҷ кунед.
- Inspect the tool for any signs of damage during transit. Do not operate if damaged.
- Боварӣ ҳосил кунед, ки ҳамаи ҷузъҳои номбаршуда мавҷуданд.
4.2 Пур кардани обанбори об
The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.
- Locate the water reservoir beneath the cutting table.
- Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
- Regularly check the water level during operation and refill as needed.
Figure 2: Filling the water reservoir for wet cutting.
4.3 Adjusting the Cutting Guide and Angle Stop
For accurate cuts, adjust the cutting guide and angle stop as required.
- The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
- For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.
Figure 3: Adjustable angle stop for miter cuts.
5. Дастурҳои истифодабарӣ
Follow these steps for safe and effective tile cutting.
5.1 Фурӯзон/хомӯш кардан
- Connect the tile cutter to a suitable power outlet (240 Volts).
- To turn on, press the green 'ON' button.
- To turn off, press the red 'OFF' button.
Figure 4: Power switch for turning the machine on and off.
5.2 Буридан
- Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
- Ensure the water pump is active and water is flowing to the blade.
- Turn on the tile cutter.
- Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
- Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.
Figure 5: Demonstrating a tile being cut with the machine.
5.3 Видеои расмии маҳсулот: Чӣ тавр истифода бурдан мумкин аст
Video 1: This video demonstrates the basic operation and usage of a tile cutter, including setup and cutting techniques.
6. Нигоҳдорӣ
Regular maintenance ensures the longevity and performance of your tile cutter.
6.1 Cleaning the Water Reservoir
After each use, clean the water reservoir to prevent buildup of tile dust and debris.
- Қувваи барқро ҷудо кунед.
- Remove the cutting table or access panel to reach the reservoir.
- Empty the dirty water and thoroughly clean the reservoir with fresh water.
- Ҷузъҳои ҷузъиро аз нав васл кунед.
6.2 Иваз кардани майса
Replace the diamond cutting disc when it becomes dull or damaged.
- Боварӣ ҳосил кунед, ки асбоб аз шабака ҷудо карда шудааст.
- Use the provided tool to loosen the blade retaining nut.
- Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
- Tighten the retaining nut securely.
7. Баррасии мушкилот
This section addresses common issues you might encounter with your tile cutter.
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Poor cut quality (chipping, uneven edges) | Dull or incorrect blade; insufficient water cooling; pushing too fast. | Replace blade with a suitable diamond disc; ensure water reservoir is full and pump is working; reduce feeding speed. |
| Water overflow from table | Water channels blocked; reservoir too full; uneven surface. | Clean water channels; do not overfill reservoir; ensure the machine is on a level surface. |
| Мошин ба кор намеояд | Не таъминоти барқ; гузариши нодуруст; масъалаи мотор. | Check power connection and circuit breaker; test the power outlet; contact customer support if switch or motor is faulty. |
| Rusted screws/components | Lack of proper drying/maintenance after wet use. | Regularly clean and dry all metal components after use. Apply a rust preventative lubricant (e.g., WD-40) to screws and moving parts. |
8. Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Бренд | Эйнҳелл |
| Рақами модел | 4301185 |
| Қувва | 800 Ватт |
| Ҷилдиtage | 240 вольт |
| Суръат | 2950 чархзании |
| Diamond Cutting Disc Diameter | 180 мм |
| Баландии максималии буриш (90°) | 34 мм |
| Баландии максималии буриш (45°) | 14 мм |
| Angle of Cut | 45 дараҷа |
| Table Dimensions (L x W) | 39.6 см х 38.5 см |
| Андозаҳои маҳсулот (L x W x H) | 39.6l. x 38.5an. x 25.5al. centimeters |
| Вазни маҳсулот | 9.1 килограмм |
| Манбаи нерӯ | Электрикӣ бо сим |
| Хусусиятҳои махсус | Adjustable angle stop, parallel stop with scale |
9. Кафолат ва дастгирӣ
9.1 Маълумот дар бораи кафолат
This Einhell product comes with a Кафолати маҳдуди 2 солЛутфан, далели хариди худро барои ҳама гуна даъвоҳои кафолат нигоҳ доред.
9.2 Дастгирии муштариён
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webбарои гирифтани маълумоти тамосии навтарин ба сайт ё бастабандии маҳсулоти шумо муроҷиат кунед.
