Spurtar 10-120 PSI Heavy Duty Tire Pressure Gauge with Inflator Air Chuck Instruction Manual

1. Муқаддима

This manual provides detailed instructions for the safe and effective use of your Spurtar 10-120 PSI Heavy Duty Tire Pressure Gauge with Inflator Air Chuck. This device is designed for accurate tire pressure measurement and efficient inflation across various vehicles, including cars, trucks, motorcycles, and bicycles. Please read this manual thoroughly before operation.

2. Маълумот оид ба бехатарӣ

• Always wear appropriate eye protection when operating air tools.
• Ensure the air compressor is turned off and depressurized before connecting or disconnecting the inflator.
• Do not exceed the maximum recommended tire pressure for your vehicle. Refer to your vehicle's owner's manual or tire placard for correct pressure values.
• Keep hands and body clear of moving parts and pressurized air streams.
• Store the inflator in a clean, dry place away from direct sunlight and extreme temperatures.

3. Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳамаи ҷузъҳои дар поён овардашуда ба бастаи шумо дохил карда шудаанд:

• 1x Spurtar Tire Pressure Gauge with Inflator Air Chuck
• 1x Rubber Hose (13 3/8 inches / 34cm)
• 1x Chrome Plated Iron Stem (5 11/16 inches / 14.5cm) with Dual Head Push-Pull Chucks
• 4x Tire Valve Cores
• 4x Metal Tire Valve Stem Caps
• 4x ABS Tire Valve Stem Caps
• 1x 4-Way Valve Core Tool
• 1x Thread Seal Tape
• 1x Lock-on Air Chuck

4. Танзимот

4.1 Connecting to an Air Compressor

1. Боварӣ ҳосил кунед, ки компрессори ҳаво хомӯш ва фишори он паст аст.
2. Apply the provided thread seal tape (PTFE tape) around the threads of the 1/4" NPT air inlet connector on the inflator. Wrap the tape in the direction of the thread spiral (usually clockwise) for a good seal.
3. Securely attach the inflator's 1/4" NPT air inlet to your air compressor's hose or quick-connect fitting. Use appropriate tools to tighten the connection, ensuring no air leakage.

5. Дастурҳои истифодабарӣ

5.1 Санҷиши фишори чархҳо

1. Сарпӯши клапанро аз пояи клапани шина хориҷ кунед.
2. Firmly press the inflator's chuck onto the tire valve stem. Ensure a tight seal to prevent air leakage.
3. The bayonet-style pressure gauge will immediately display the current tire pressure.
4. Compare the reading to your vehicle's recommended tire pressure.

5.2 Пур кардани чархҳо

1. With the chuck firmly attached to the tire valve stem, press down the thumb trigger on the inflator. Air will begin to flow into the tire.
2. Monitor the pressure gauge as you inflate.
3. Release the trigger once the desired pressure is reached.

5.3 Deflating Tires (if over-inflated)

1. If the tire is over-inflated, press the small air bleeder valve button located near the trigger.
2. Air will be released from the tire. Monitor the pressure gauge until the desired pressure is achieved.

6. Нигоҳдорӣ

• Regularly inspect the hose and connections for any signs of wear, cracks, or damage. Replace components as needed.
• Keep the inflator clean and free of dirt, dust, and debris. Wipe with a dry cloth after each use.
• Ensure the valve core tool and spare valve cores are stored securely.
• Do not lubricate the gauge mechanism.

7. Баррасии мушкилот

8. Мушаххасоти

9. Кафолат ва дастгирӣ

Spurtar products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Spurtar webсайт. Барои ҳама даъвоҳои кафолат далели хариди худро нигоҳ доред.