KOMSHINE FX37 Core Alignment Fusion Splicer User Manual

1. Муқаддима

This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of the KOMSHINE FX37 Core Alignment Fusion Splicer. The FX37 is designed for precise fiber optic splicing, featuring fast splicing and heating times, a high-definition touch screen, and robust construction for various field applications.

Image: KOMSHINE FX37 Core Alignment Fusion Splicer, illustrating its main features including the 4.3-inch LCD monitor, 0.01dB average splicing loss, HD CMOS sensor, 7-second splicing, and 18-second heating.

2. Маълумот оид ба бехатарӣ

Барои пешгирии осеб ва осеб дидани таҷҳизот ҳамеша чораҳои бехатарии зеринро риоя кунед:

• Боварӣ ҳосил кунед, ки ҷои кор тоза, хушк ва хуб равшан аст.
• Handle optical fibers with extreme care. Fiber shards are very sharp and can cause serious injury. Always use a fiber waste container.
• Do not look directly into the fiber end faces when the splicer is operating, as invisible laser light may be present.
• Use only the provided AC adapter and battery pack. Using unauthorized power sources may damage the device or cause fire.
• Keep the splicer away from water, moisture, and flammable materials.
• Кӯшиш накунед, ки дастгоҳро худатон қисм-қисм кунед ё таъмир кунед. Ба кормандони баландихтисос муроҷиат кунед.

3. Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳамаи ҷузъҳои дар поён овардашуда ба бастаи шумо дохил карда шудаанд:

Image: The complete KOMSHINE FX37 Fusion Splicer kit, including the splicer unit, carrying case, power adapter, fiber cleaver, strippers, and other essential accessories.

• FX37 Arc Fusion Splicer (1 unit)
• Адаптери AC (1 адад)
• FIS Fiber Stripper (1 unit)
• Spare Electrodes (1 pair)
• Battery Pack (1 unit)
• Alcohol Pump Bottle (1 unit)
• Cleaning Wipes (100 pieces)
• Flat Cable Stripper (1 unit)
• Cooling Tray (1 unit)
• Fiber Cleaver TFC-30 (1 unit)
• Дастури корбар (1 адад)
• Carrying Case (1 unit)
• Protection Sleeves 60mm (100 pieces)

4. Хусусиятҳои маҳсулот

The KOMSHINE FX37 Fusion Splicer offers advanced features for reliable fiber optic splicing:

• Core Alignment: Precise core alignment method for ultra-low fiber fusion splicing consumption.
• Ҷойгиркунии зуд ва гармкунӣ: 7-second typical fusion splicing time and 18-second typical heating time.
• Намоиши баландсифат: 4.3-inch high-definition capacitive touch screen for clear image display.
• Баландшавии тасвир: 320 times image magnification for detailed fiber inspection.
• Versatile Splicing Modes: 300 groups of fusion splicing modes and 100 groups of heating modes.
• Ҳаёти батареяи дароз: Built-in modular lithium battery supports approximately 330 splicing and heating cycles on a single charge.
• Нигоҳдории маълумот: Stores 10,000 groups of fusion records and 64 images.
• Компонентҳои устувор: Ceramic presser foot, ceramic V-block, and all-in-one fixture.
• Функсияҳои автоматӣ: Dual-direction splicing, automatic splicing, and intelligent pyrocondensation.
• Пайвастшавӣ: USB and SD card interfaces for data transfer and U-disk automatic software upgrades.

5. Танзимот

1. Кушодани: Carefully remove the splicer and all accessories from the carrying case. Place the splicer on a stable, clean, and level surface.
2. Battery Installation/Charging:

   The battery pack is typically pre-installed. If not, insert the battery pack into its compartment. Connect the AC adapter to the splicer and a power outlet to charge the battery. The charging indicator will show the status. A full charge supports approximately 330 splicing and heating operations.

   

   Image: Illustration of the FX37's battery, indicating 330 splicing cycles and 6800mAh capacity.

3. Фаъол: Press and hold the power button until the display illuminates. The splicer will perform a self-test.
4. Танзимоти ибтидоӣ: Navigate through the touch screen menu to set language, date, time, and other preferences as needed.

6. Дастурҳои истифодабарӣ

6.1 Тайёр кардани нах

1. Таркиш: Use the FIS Fiber Stripper or Flat Cable Stripper to remove the fiber coating to the required length (typically 30-40mm). Ensure the stripping tool is clean and sharp.
2. Тозакунӣ: Clean the stripped fiber thoroughly with an alcohol wipe (99% isopropyl alcohol) to remove any residue. Allow the alcohol to evaporate completely.
3. Ҷудо кардан: Place the cleaned fiber into the TFC-30 Fiber Cleaver. Ensure the fiber is positioned correctly according to the cleaver's instructions to achieve a precise 90-degree end face. Operate the cleaver to cut the fiber.

   Image: The TFC-30 Fiber Cleaver, used for preparing fiber ends for splicing.

4. Санҷиш: Visually inspect the cleaved fiber end face for any imperfections using the splicer's magnified view. Recleave if necessary.

6.2 Раванди пайвастшавӣ

1. Open Wind Protector: Lift the wind protector cover of the splicer.
2. Ҷойгиркунии нахҳо: Carefully place the prepared fibers into the V-grooves of the splicer. Ensure the fiber ends are positioned correctly between the electrodes.

   Image: Step-by-step illustration of compatible fiber/cable types and their correct placement within the FX37 splicer's V-grooves.
3. Close Wind Protector: Gently close the wind protector. The splicer will automatically begin the alignment process.
4. Automatic Splicing: The FX37 will automatically align the fiber cores and initiate the fusion splicing process. This typically takes 7 seconds. The display will show the splicing progress and estimated loss.

   Image: The FX37 display showing the splicing process, indicating a 7-second splicing time and 18-second heating time, with a typical loss of 0.01dB.

5. Пайвастшавиро тафтиш кунед: After splicing, the splicer will display the estimated splice loss. Visually inspect the splice point on the screen for any defects.

6.3 Heating Process

1. Position Protection Sleeve: Slide a protection sleeve over the spliced fiber.
2. Place in Heater: Open the heating oven cover and carefully place the spliced fiber with the protection sleeve into the heating oven.
3. Close Heater: Close the heating oven cover. The splicer will automatically begin the heating process, which typically takes 18 seconds.
4. хунуккунӣ: Once heating is complete, carefully remove the fiber from the oven and place it in the cooling tray to cool down.

7. Нигоҳдорӣ

7.1 Тозакунӣ

• V-Grooves ва Clamps: V-grooves ва нахи cl мунтазам тоза кунедamps with a cotton swab dipped in isopropyl alcohol to prevent dust and fiber debris from affecting splicing performance.
• Электродҳо: Clean the electrodes periodically using a specialized electrode cleaner or a cotton swab with alcohol. Ensure the splicer is powered off before cleaning electrodes.
• Экрани намоиш: Use a soft, lint-free cloth to clean the touch screen. Do not use abrasive cleaners.

7.2 Иваз кардани электрод

Electrodes have a limited lifespan (approximately 4,000 splices). When the splicer indicates electrode wear or splicing performance degrades, replace them:

Тасвир: Наздик view of the FX37 electrodes, highlighting their position and the integrated LED lighting for dim environments.

1. Power off the splicer and disconnect the power adapter.
2. Carefully remove the old electrodes using the provided tool or tweezers.
3. Insert the new spare electrodes, ensuring they are correctly seated.
4. Power on the splicer and perform an arc calibration (refer to the splicer's on-screen menu for this function).

8. Баррасии мушкилот

9. Мушаххасоти

10. Кафолат ва дастгирӣ

The KOMSHINE FX37 Fusion Splicer comes with a Кафолати 1 сол аз рӯзи харид. Ин кафолат нуқсонҳои истеҳсолӣ ва корношоямиро дар ҳолати истифодаи муқаррарӣ фаро мегирад. Лутфан далели хариди худро барои даъвоҳои кафолат нигоҳ доред.

For technical support, service, or warranty inquiries, please contact your authorized KOMSHINE dealer or visit the official KOMSHINE webсайт барои маълумоти тамос.

Note: All buyers are responsible for customs clearance in a timely manner. If assistance is needed, please contact the seller in advance.