1. Маҳсулот ба охир расидview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Моторҳои иқтидори баланд: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Тарҳрезии эргономикӣ: Compact and ergonomic form for comfortable handling.
- Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Дастурамал оид ба бехатарӣ
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Бехатарии умумӣ
- Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and a dust mask.
- Боварӣ ҳосил кунед, ки порчаи корӣ бехатар аст clampпеш аз амалиёт.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Асбобро дар муҳити тарканда, масалан, дар ҳузури моеъҳои оташгиранда, газҳо ё чанг истифода набаред.
- Ҳангоми идора кардани асбоби барқӣ кӯдакон ва шахсони дар назди онҳо бударо дур нигоҳ доред.
Бехатарии барқ
- Таъмини таъминоти барқ voltage matches the rating on the tool's nameplate.
- Симро суиистифода накунед. Ҳеҷ гоҳ симро барои бардоштан, кашидан ё ҷудо кардани асбоби барқӣ истифода набаред. Симро аз гармӣ, равған, кунҷҳои тез ё қисмҳои ҳаракаткунанда дур нигоҳ доред.
- Агар асбоби электрикиро дар адamp ҷойгиршавӣ ногузир аст, истифода дастгоҳи ҷорӣ боқимонда (RCD) таъминоти ҳифз.
Specific Angle Grinder Safety
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Қисмҳо ва хусусиятҳо
Компонентҳои асосӣ:
- Ҳайати асосӣ: Houses the motor, electronics, and gearbox.
- Гвардияи муҳофизатӣ: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Тугмаи қулфи шпиндель: Барои иваз кардани осони диск.
- Гузариши слайд: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Вентильҳои ҳавоӣ: For motor cooling and dust expulsion.
4. Танзимот
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Mounting the Protective Guard
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Тугмаи қулфи шпиндельро пахш карда нигоҳ доред.
- Place the inner clampфланецро ба шпиндель гузоред.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- Дар cl винт кунедamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Тугмаи қулфи шпиндельро озод кунед.
5. Дастурҳои истифодабарӣ
Фурӯзон/хомӯшкунӣ
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Назорати суръати тағирёбанда
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Ҳамеша суфтакунандаро бо ду даст сахт нигоҳ доред.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Нигоҳдорӣ
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Тозакунӣ
- Пеш аз тоза кардан ҳамеша асбобро аз розетка ҷудо кунед.
- Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
- Қисми берунии асбобро бо рек тоза кунедamp матоъ. Моддаҳои кимиёвии сахт ё тозакунандаи абразивиро истифода набаред.
Бразили карбон
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Нигоҳдорӣ
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Баррасии мушкилот
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Восита оғоз намешавад | Не таъминоти барқ Restart interlock activated (after power failure) Сими барқ вайрон шудааст | Пайвастагии барқро тафтиш кунед Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| Асбоб хангоми кор катъ мегардад | Муҳофизати изофабор фаъол карда шуд Disc jammed (anti-kickback activated) | Reduce pressure; allow tool to cool Release switch, clear obstruction, then restart |
| Вибрацияи аз ҳад зиёд | Worn or damaged disc Диски нодуруст насбшуда Дастаки фуҷур | Дискро иваз кунед Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Чӯткаҳои карбон фарсуда Dust buildup in vents | Have brushes inspected/replaced by service center вентиляторҳои ҳаворо бодиққат тоза кунед |
8. Мушаххасоти
| Хусусият | Арзиш |
|---|---|
| Рақами модел | 447668 |
| Вуруди нерӯ | 1700 В |
| Баромади барқ | 1050 В |
| Ҷилдиtage | 230 В |
| Басомад | 50/60 Гц |
| Макс. Диаметри диск | 125 мм |
| Суръати бебор | 2800-11500 чархзанӣ |
| Tool Holder (Angle Grinder) | М14 |
| Дарозии кабел | 4 м |
| Андозаҳо (L x W x H) | 340 x 77 x 105 мм |
| Вазн | 2.6 кг |
| Ранги | Red, Black, Silver |
| Материал | Металл |
9. Кафолат ва дастгирӣ
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex webсайт ё дар бастаи маҳсулоти шумо.
