DLLT WSCL30-B Modern 3-Light Semi Flush Mount Ceiling Light Instruction Manual

1. Муқаддима

Thank you for choosing the DLLT WSCL30-B Modern 3-Light Semi Flush Mount Ceiling Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Маълумоти муҳим оид ба бехатарӣ

• Always turn off the power at the main circuit breaker before installation, maintenance, or bulb replacement.
• Агар шумо дар бораи раванди насб боварӣ надошта бошед, ба электрики соҳибихтисос муроҷиат кунед.
• Боварӣ ҳосил кунед, ки ҳама пайвастҳои барқӣ бехатаранд ва ба кодексҳо ва қоидаҳои маҳаллӣ мувофиқанд.
• Аз ҳадди ниҳоии ват зиёд накунедtage for bulbs (60W per socket).
• Барои пешгирӣ аз вайроншавӣ, асбобро бодиққат истифода баред.

2. Мундариҷаи баста

Пеш аз оғози насбкунӣ тасдиқ кунед, ки ҳама ҷузъҳо мавҷуданд:

• Drum Shade Ceiling Lamp
• Таҷҳизоти васлкунӣ (винтҳо, гайкаҳои симӣ, кронштейни васлкунӣ)
• Дастури маҳсулот

Note: E26 bulbs are NOT included and must be purchased separately.

3. Танзим ва насб

Follow these steps for proper installation of your ceiling light fixture:

1. Хомӯш кардани барқ: Before starting, ensure the power supply to the junction box is turned off at the circuit breaker.
2. Омода кардани васлкунӣ: Кронштейни васлкуниро ба қуттии пайвандкунандаи шифт бо истифода аз винтҳои додашуда пайваст кунед. Боварӣ ҳосил кунед, ки он боэътимод маҳкам карда шудааст.
3. Пайвастҳои ноқилӣ: Connect the fixture's wires to the corresponding household wires using the provided wire nuts. Connect the ground wire (usually bare copper or green) from the fixture to the ground wire from the junction box. Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box. Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box.
4. Дастгоҳи бехатар: Carefully push the wired fixture up to the ceiling, aligning the mounting screws on the bracket with the holes in the fixture's canopy. Secure the fixture in place with the decorative nuts or screws.
5. Лампаҳо насб кунед: Screw three E26 base bulbs (max 60W each, not included) into the sockets.
6. Диффузорро замима кунед: Place the frosted white acrylic diffuser at the bottom of the drum shade and secure it with the central finial.
7. Барқарор кардани қудрат: Пас аз ба итмом расидани насб, қувваи барқро дар сӯрохи барқ ​​​​аз нав фаъол кунед.

Расми 3.1: Таркид view of the light fixture showing the canopy, double drum shade with intricate lattice metal, and high-transparency bottom cover. The image highlights the E26 sockets and the simple assembly process.

4. Дастурҳои истифодабарӣ

Your DLLT ceiling light is designed for simple operation:

• Фаъол / Хомӯш: Барои фурӯзон ё хомӯш кардани чароғ, тугмаи стандартии девори худро истифода баред.
• Функсияи тиракунӣ: If you have installed dimmable E26 bulbs and connected the fixture to a compatible dimmer switch (not included), you can adjust the brightness level to suit your preference.

Figure 4.1: The light fixture demonstrating its on and off states, and the ability to display different light temperatures (warm white and daylight) depending on the bulbs used.

Figure 4.2: Visual representation of the light fixture's effect in a hallway when turned on versus off, highlighting its illumination capabilities.

5. Нигоҳдорӣ

To ensure the longevity and appearance of your DLLT ceiling light, follow these simple maintenance guidelines:

• Тозакунӣ: The fixture is made from high-quality metal and acrylic, making it easy to clean. Simply wipe it with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the finish.
• Иваз кардани лампа: To replace bulbs, ensure the power is off at the circuit breaker. Unscrew the central finial, carefully remove the acrylic diffuser, and then replace the E26 bulbs. Reattach the diffuser and finial before restoring power.

6. Баррасии мушкилот

If you encounter any issues with your DLLT ceiling light, refer to the following common troubleshooting steps:

• Чароғ фурӯзон нест:
  • Калиди барқро санҷед, то боварӣ ҳосил кунед, ки қувваи барқ ​​фаъол аст.
  • Verify that the bulbs are securely screwed into their sockets and are not burnt out.
  • Ensure all wiring connections are correct and secure.
• Чароғҳои дурахшон:
  • Боварӣ ҳосил кунед, ки лампаҳо пурра маҳкам карда шудаанд.
  • If using dimmable bulbs, ensure they are compatible with your dimmer switch.
• Нури нокифоя:
  • Ватро тафтиш кунедtage of your bulbs; ensure they are appropriate for your room size and do not exceed the fixture's maximum wattage.
  • Consider using bulbs with a higher lumen output.

Агар пас аз кӯшиши ин қадамҳо мушкилот боқӣ монад, лутфан бо дастгирии муштариён тамос гиред.

7. Мушаххасоти

Figure 7.1: Detailed dimensions and bulb compatibility information for the DLLT ceiling light fixture.

Figure 7.2: The light fixture is compatible with a variety of E26 based bulbs, including LED, CFL, incandescent, and halogen (bulbs not included).

8. Кафолат ва дастгирӣ

Your DLLT ceiling light fixture comes with the following assurances:

• 12-Month Quality Guarantee: We offer a 12-month quality guarantee from the date of purchase.
• Сиёсати баргардонидани 30 рӯз: Агар шумо аз хариди худ қаноатманд набошед, шумо метавонед дар давоми 30 рӯз баргардонида шавед.
• Дастгирии муштариён: For any issues or inquiries, please contact us. We are committed to resolving any concerns promptly within 24 hours.

9. Барномаҳои маҳсулот

The DLLT WSCL30-B ceiling light is versatile and suitable for various indoor settings:

Расми 9.1: Мисamples of the light fixture installed in different rooms, including living room, dining room, kitchen, and bedroom.

Figure 9.2: The light fixture provides ample illumination for kitchen areas.

Figure 9.3: The fixture creates a cozy and serene environment in bedrooms.