Smartwares SH4-99559 Wireless Built-in Shutter Switch Kit - 3 Pieces

Муқаддима

This manual provides detailed instructions for the installation, operation, and maintenance of your Smartwares SH4-99559 Wireless Built-in Shutter Switch Kit. This kit allows you to wirelessly control your electric blinds, shutters, or curtains, integrating them into your Smartwares Plug & Connect smart home system.

The kit includes three wireless built-in switches, designed for easy integration into existing electrical systems. For optimal performance and safety, please read this manual thoroughly before installation and use.

Насб ва насб

Маълумоти муҳим оид ба бехатарӣ: Installation should only be performed by a qualified electrician or in accordance with local electrical codes. Always disconnect power at the main circuit breaker before beginning any electrical work.

1. Кушодан ва тафтиш

Carefully remove all components from the packaging. Verify that all three built-in switches are present and undamaged. If any components are missing or damaged, contact your retailer.

Image: The Smartwares SH4-99559 kit, showing three white wireless built-in shutter switches.

2. Wiring the Switch

Each built-in switch is designed to be installed within a standard junction box behind your existing shutter switch or directly connected to your electric motor. The module requires a 230V power supply and connects to the motor's up and down control wires.

1. Хомӯш кардани барқ: Ensure the power supply to the circuit is completely off at the main breaker.
2. Муайян кардани симҳо: Identify the Live (L), Neutral (N), Up (U), and Down (D) wires for your electric shutter motor. The switch also has a connection for a common wire (C) if applicable.
3. Пайваст кардани симҳо: Connect the wires to the corresponding terminals on the Smartwares SH4-99559 switch. Refer to the diagram below for terminal identification.

Тасвир: Нақшаи наздик view of the Smartwares SH4-99559 built-in switch, showing the screw terminals labeled B, A, C, L, N for electrical connections. These typically correspond to Up, Down, Common, Live, and Neutral.

Terminal Guide:

• L: Live (Phase) 230V AC
• N: Нейтрал 230В AC
• U (or B): Up control wire for the motor
• D (or A): Down control wire for the motor
• C: Common wire (if required by your motor/system)

3. Ҷойгиркунии Гузариш

Once wired, carefully place the built-in switch into the junction box. Ensure no wires are pinched and that there is sufficient space for the module. Secure the module if necessary, then re-attach the cover plate or existing switch mechanism.

Image: The Smartwares SH4-99559 built-in switch shown installed within a standard round electrical junction box, demonstrating its compact design for concealed installation.

4. Pairing with a Remote Control or Smart Switch

The Smartwares SH4-99559 switches operate on a 433 MHz radio frequency and are compatible with Smartwares Plug & Connect remote controls and smart switches (sold separately). Follow these general steps to pair your switch:

1. Барқарор кардани қудрат: Қувваи барқро дар ноқилҳои асосӣ дубора фурӯзон кунед.
2. Ҳолати ҷуфтшавиро фаъол созед: On the SH4-99559 module, there is typically a small learning button or a specific sequence to enter pairing mode. Consult the specific instructions for your Smartwares remote control or smart switch for the exact pairing procedure. Usually, you press the learning button on the module, then activate the desired button on your remote or app.
3. Тасдиқ: The shutter motor should briefly move or an indicator light on the module should flash to confirm successful pairing.
4. Функсияи санҷиш: Test the up and down functions using your paired remote or smart switch.

Дастурҳои амалиётӣ

Once installed and paired, your Smartwares SH4-99559 switches provide convenient wireless control over your electric blinds, shutters, or curtains.

Using a Smartwares Remote Control

• -ро пахш кунед "UP" button on your remote to raise the shutter/blind.
• -ро пахш кунед "DOWN" button on your remote to lower the shutter/blind.
• -ро пахш кунед "STOP" button (if available on your remote) to halt the shutter/blind at its current position.

Using the Smartwares Smart Switch (via HomeWizard App)

If you have connected your SH4-99559 switches to a Smartwares Smart Switch (e.g., HomeWizard Link), you can control them via the free HomeWizard app on your smartphone or tablet.

• -ро кушоед HomeWizard app дар дастгоҳи шумо.
• Navigate to the device list or specific room where your shutter switch is located.
• -ро пахш кунед "UP" or "DOWN" icon to control the shutter/blind.
• The app may also offer options for setting schedules or scenes for automated control.

Нигоҳдорӣ

The Smartwares SH4-99559 Wireless Built-in Shutter Switch Kit requires minimal maintenance.

• Тозакунӣ: If the module is exposed (e.g., during inspection), gently wipe it with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
• Навсозии нармафзор: If connected to a Smartwares Smart Switch and the HomeWizard app, ensure your Smart Switch firmware is up to date for optimal performance and security.
• Санҷишҳои мунтазам: Periodically check the physical connections during other electrical maintenance to ensure they remain secure.

No user-serviceable parts are inside the module. Do not attempt to open or repair the device yourself.

Мушкилкушо

If you encounter issues with your Smartwares SH4-99559 switches, refer to the following common problems and solutions:

Мушаххасоти техникӣ

Маълумот дар бораи кафолат

Smartwares products are designed and manufactured to high-quality standards. This product comes with a limited warranty. Based on available information, spare parts availability is guaranteed for 1 year from the date of purchase.

For detailed warranty terms and conditions, please refer to the official Smartwares webсайт ё бо хидмати мизоҷони худ тамос гиред.

Дастгирӣ ва тамос

For further assistance, technical support, or to inquire about additional Smartwares Plug & Connect products, please visit the official Smartwares webсайт:

www.smartwares.eu

You may also find frequently asked questions and product documentation on their support pages.