LEDVANCE Linear LED Shelf Light 400mm

1. Муқаддима

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Лутфан, пеш аз насб ин дастурро бодиққат хонед ва онро барои истиноди оянда нигоҳ доред.

2. Дастурамал оид ба бехатарӣ

• Бехатарии барқ: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
• Истифодаи таъиншуда: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• Рейтинги IP44: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Манбаи нур: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Муносибат: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• Тозакунӣ: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Мундариҷаи баста

Пеш аз оғози насбкунӣ тасдиқ кунед, ки ҳама ҷузъҳо мавҷуданд:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Лавозимотҳои пайвастшавӣ

4. Мушаххасоти

Эзоҳ: Мушаххасот бояд бе огоҳӣ тағир дода шаванд.

5. Танзим ва насб

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Минтақаи насбро омода кунед: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Хомӯш кардани барқ: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Нуқтаҳои пармакунӣ қайд кунед: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. сӯрохиҳои пармакунӣ: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert the provided wall plugs into the drilled holes.
5. Пайвасткунакҳои васлкунӣ: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached.
6. Пайвастагии барқ: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Ҷойгир кардани дастгоҳ: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Барқарор кардани қудрат: Once the fixture is securely mounted and wired, restore power at the main circuit breaker.

6. Дастурҳои истифодабарӣ

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Фаъолияти худкор: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Хомӯшкунии худкор: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Ҷойгиркунии сенсор: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Нигоҳдорӣ

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• Тозакунӣ: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or sprays directly on the fixture.
• Санҷиш: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Манбаи нур: The LED light source is integrated and not user-replaceable. If the light source fails, the entire fixture must be replaced.

8. Баррасии мушкилот

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• Чароғ фурӯзон намешавад:
  • Санҷед, ки оё манбаи барқ ​​пайваст аст ва автомати муҳофизатӣ фаъол аст.
  • Боварӣ ҳосил кунед, ки пайвастҳои ноқилҳо бехатар мебошанд.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Нур пайваста фурӯзон аст:
  • Ensure there is no continuous motion within the sensor's detection range.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Милтилдаҳо ё дурахшҳои рӯшноӣ:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Боварӣ ҳосил кунед, ки ҷtage supply is stable and within the specified range (240V).

Агар ин қадамҳо мушкилотро ҳал накунанд, бо хадамоти дастгирии муштариён тамос гиред.

9. Кафолат ва дастгирӣ

This LEDVANCE Linear LED Shelf Light comes with a Кафолати 2 сол аз рӯзи харид, пӯшонидани камбудиҳои мавод ва коркард дар ҳолати истифодаи муқаррарӣ.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number ready.