SCULPFUN S9 Laser Engraver Machine User Manual

Маълумоти муҳим оид ба бехатарӣ

Operating a laser engraver requires strict adherence to safety guidelines to prevent injury and damage. Always read and understand all instructions before use.

• Муҳофизати чашм: Always wear the provided laser safety glasses when the machine is in operation. The laser filter cover on the S9 filters 98% of ultraviolet light, but direct exposure can still cause severe eye damage.
• Хавфи сӯхтор: Laser engraving and cutting can generate heat and sparks, potentially causing fires. Never leave the machine unattended during operation. Ensure a fire extinguisher is readily available.
• Вентилятсия: Operate the machine in a well-ventilated area to dissipate fumes and smoke produced during engraving/cutting.
• Бехатарии моддӣ: Only engrave or cut materials specified as safe. Some materials can produce toxic fumes or catch fire easily.
• Муҳофизати сатҳи корӣ: Use the A4 steel pad provided to protect your work surface from laser damage and to isolate potential fire risks.
• Истгоҳи фавқулодда: Familiarize yourself with the location of the emergency power switch on the S9 machine for immediate shutdown.

The laser module features a protective cover to help filter harmful light, enhancing eye safety during operation.

A safety metal pad is included to protect your table from laser penetration and reduce fire risks.

Маҳсулот ба охир расидview

The SCULPFUN S9 is a high-performance laser engraver and cutter designed for precision work on a variety of materials. It features advanced laser beam shaping technology, an all-metal structure for stability, and a user-friendly fixed-focus design.

The SCULPFUN S9 machine, showcasing its robust design and examples of its engraving and cutting capabilities on different materials.

Хусусиятҳои асосӣ

• Laser Beam Shaping Technology: Utilizes a 5.5W diode laser with an ultra-fine 0.06mm laser focus, providing a 90W CO2 laser effect for strong cutting penetration and fine engraving.
• Дақиқии баланд: Achieves an engraving precision of 0.01mm, allowing for incredibly detailed work.
• Fixed-Focus Design: Features a combination of a fixed-focus lens and a sliding design for quick and easy focusing by simply moving the laser and tightening screws.
• Robust All-Metal Structure: Ensures extreme sturdiness and enhances engraving accuracy, designed for quick assembly within 10-20 minutes.
• Large Engraving Area: Offers a generous 410mm x 420mm working area to accommodate various project sizes.
• Мутобиқати васеъ: Supports popular engraving software such as LaserGRBL, LightBurn, Benbox, Grbl Controller, and LiteFire, compatible with Windows and MAC systems, and various file formats (JPG, PNG, DXNF, SVG, G-Code, BC, BMP).

Муфассал view of the laser module, emphasizing its advanced laser beam shaping technology for superior performance.

Visual comparison illustrating the thinner, more effective energy range of the S9 laser compared to an ordinary square laser.

A magnified image demonstrating the ultra-thin, high-precision engraving line capability of the S9, as fine as 0.08mm.

Маҷлис ва насб

The SCULPFUN S9 is designed for quick and straightforward assembly. Follow these general steps to set up your machine:

1. Компонентҳоро кушоед: Ҳамаи қисмҳоро аз бастабандӣ бодиққат хориҷ кунед ва бо рӯйхати бастабандӣ муқоиса кунед.
2. Чорчӯбро ҷамъ кунед: Connect the aluminum profiles to form the main frame of the engraver. The design allows for rapid assembly, typically within 10-20 minutes.
3. Модули лазерро насб кунед: Mount the laser module onto the gantry. Ensure it is securely fastened.
4. Кабелҳои пайвастшавӣ: Attach all necessary power and data cables according to the provided diagrams.
5. Фаъол: Connect the power adapter and turn on the machine using the main power switch.

Visual guide illustrating the simple, step-by-step assembly process for the SCULPFUN S9.

Focusing the Laser

The S9 features a fixed-focus laser combined with a sliding design for easy focusing. To set the focus:

1. Place the material to be engraved or cut on the work surface.
2. Move the laser module down until the fixed-focus spacer (usually a small metal cylinder) touches the material surface.
3. Tighten the screws on the laser module to secure it in this position.
4. Remove the fixed-focus spacer. The laser is now correctly focused for your material.

Operating the SCULPFUN S9

Мутобиқати нармафзор

The SCULPFUN S9 is compatible with a wide range of sophisticated engraving software, offering flexibility for your projects:

• LaserGRBL
• LightBurn (supports MAC system)
• Benbox
• Grbl Controller
• LiteFire

It supports PWM engraving mode and various file formats including JPG, PNG, DXF, SVG, G-Code, BC, and BMP.

The SCULPFUN S9 offers broad compatibility with popular laser engraving software, enhancing user flexibility.

Маводҳои дастгирӣ

The S9 can engrave and cut a diverse range of materials:

• Маводҳои кандакорӣ: Wood, bamboo, cardboard, plastic, leather, PCB, alumina, 304 stainless steel, ceramic, black stone.
• Маводҳои буридан: Wood (up to 15mm thick), acrylic board (up to 10mm thick), cardboard, non-woven fabric, bamboo, certain plastic boards.

A visual display of the SCULPFUN S9's versatility, showing successful engraving and cutting on a wide array of materials.

Images demonstrating the S9's impressive cutting capabilities on thick materials like 15mm wood, 10mm plywood, and 10mm acrylic.

Қадамҳои асосии амалиёт

1. Тарҳрезии худро омода кунед: Create or import your design using your chosen engraving software. Adjust settings such as power, speed, and passes according to your material and desired outcome.
2. Маводҳои ҷойгиршавӣ: Securely place your material on the work surface, ensuring it is flat and within the engraving area. Use the A4 steel pad underneath.
3. Set Focus: Follow the fixed-focus procedure described in the Setup section to ensure optimal laser focus.
4. Мошини пайвастшавӣ: Граверро ба компютери худ тавассути USB пайваст кунед.
5. Оғози амалиёт: Initiate the engraving or cutting process from your software.
6. Мониторинги пешрафт: Stay near the machine and monitor the process for any issues, especially fire hazards.
7. Хомӯш: Once the process is complete, turn off the machine and disconnect it from the power source.

Нигоҳдорӣ ва нигоҳубин

Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S9 laser engraver.

• Clean Laser Lens: Барои нигоҳ доштани қувват ва дақиқии лазер, линзаи лазерро мунтазам бо матои нарм ва бепаж ва маҳлули тозакунандаи линза тоза кунед.
• Inspect Belts and Rails: Check the tension of the timing belts and ensure the guide rails are clean and free of debris. Lubricate rails if necessary, using appropriate lubricant.
• Тозакунии умумӣ: Keep the machine free of dust and material residue. Use compressed air to clean hard-to-reach areas.
• Навсозии нармафзор: Истеҳсолкунандаро санҷед website for any available firmware updates to ensure your machine runs with the latest improvements.

Бартараф кардани мушкилоти умумӣ

Ин бахш роҳҳои ҳалли мушкилоти маъмулиеро, ки шумо метавонед бо онҳо дучор шавед, пешниҳод мекунад.

Мушаххасоти техникӣ

Кафолат ва дастгирии мизоҷон

The SCULPFUN S9 Laser Engraver Machine comes with a standard manufacturer's warranty. Please refer to your purchase documentation or the retailer's webсайт барои шартҳо ва шартҳои кафолати мушаххас.

For technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact the manufacturer or your point of purchase. Keep your purchase receipt and model number (S9) handy when contacting support.