JEYI I9-Seal

Дастури корбарии JEYI I9-Seal M.2 NVMe SSD Enclosure

Model: I9-Seal

Муқаддима

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Мундариҷаи баста

Лутфан тасдиқ кунед, ки ҳамаи ҷузъҳои дар поён овардашуда ба бастаи шумо дохил карда шудаанд:

  • JEYI M.2 NVMe SSD Enclosure
  • Пойгоҳҳои гармӣ
  • Отвертка
  • USB-A to USB-C Cable (10Gbps)
  • USB-C to USB-C Cable (10Gbps)
  • Ланёр
JEYI I9-Seal M.2 NVMe SSD Enclosure package contents
Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Дастурҳои насб

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

  1. Prepare the Enclosure: Gently slide open the enclosure to reveal the internal PCB.
  2. Лавҳаи гармидиҳиро истифода баред: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
  3. Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
  4. SSD-ро муҳофизат кунед: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
  5. Қуттиро пӯшед: Carefully slide the enclosure cover back into place until it clicks securely.
Таркид view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement
Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.
Diagram showing compatibility with M.2 2280 NVMe SSDs only
Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Дастурҳои амалиётӣ

Once your NVMe SSD is securely installed, connect the enclosure to your device:

  1. Ба дастгоҳ пайваст шавед: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
  2. Нишондиҳандаи барқ: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
  3. Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
  4. Интиқоли маълумот: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.
JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet
Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.
Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2
Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Нигоҳдорӣ

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

  • Идоракунии гармӣ: Алюминий casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
  • Тозакунӣ: Use a soft, dry cloth to clean the exterior of the enclosure. Avoid using liquid cleaners or solvents.
  • Нигоҳдорӣ: Вақте ки истифода намешавад, қуттиро дар ҷои хунук ва хушк, дур аз нури бевоситаи офтоб ва ҳарорати аз ҳад зиёд нигоҳ доред.
  • Нигоҳубини кабел: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Мушкилкушо

МушкилотСабаби эҳтимолӣҲалли
Enclosure not detected by computer.
  • Пайвасти кабели фуҷур.
  • SSD not properly installed.
  • SSD not initialized/formatted.
  • Сими ё порти USB-и нодуруст.
  • Боварӣ ҳосил кунед, ки кабелҳо боэътимод пайваст карда шудаанд.
  • Re-open enclosure and verify SSD is seated correctly and screwed in.
  • Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD.
  • Порт ё сими дигари USB-ро санҷед.
Суръати пасти интиқоли маълумот.
  • Connected to a slower USB port (e.g., USB 2.0).
  • Thermal throttling due to high temperature.
  • SSD performance limitations.
  • Connect to a USB 3.2 Gen 2 (10Gbps) compatible port.
  • Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot.
  • Verify your NVMe SSD's rated speed.
Enclosure gets very hot.
  • Normal operation during heavy data transfer.
  • Ineffective thermal pad contact.
  • This is expected as the aluminum casing dissipates heat.
  • Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Мушаххасоти

ХусусиятТафсилот
МоделиI9-Seal
БрендJEYI
Интерфейси сахтафзорUSB 3.2 Насли 2 (USB-C)
Меъёри интиқоли маълумотТо 10 Гбит/с
Compatible SSD TypeNVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor2280 (80mm) only
Иқтидори максималии нигоҳдорӣ4 ТБ
ЧипсетJMS583 A3
ВижагиҳоUASP Support, TRIM Support, Win to Go (WTG) Support
МатериалХӯлаи алюминий
РангиНуқра
Андозаҳои маҳсулот4.06 x 1.02 x 0.39 инч (103 x 26 x 10 мм)
Вазни ашё0.317 унсия (9 грамм)
Системаҳои оператсионии мувофиқWindows, macOS, Linux, iOS, Android
Diagram of the JMS583 A3 master chip
Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Кафолат ва дастгирӣ

For warranty information or technical support, please refer to the official JEYI website or contact their customer service directly. Details regarding specific warranty periods and support channels are typically provided with your purchase documentation or on the manufacturer's webсайт.

Истеҳсолкунанда: JEYI

Webсайт: Visit the JEYI Store on Amazon

© 2025 JEYI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.