AsperX AX260 3000A Jump Starter with Air Compressor User Manual

1. Маълумот оид ба бехатарӣ

Ҳама огоҳиҳои бехатарӣ, дастурҳо, тасвирҳо ва мушаххасоти бо ин маҳсулот додашударо хонед. Риоя накардани ҳамаи дастурҳои дар поён овардашуда метавонад боиси зарбаи барқ, сӯхтор ва/ё ҷароҳати вазнин гардад.

• Ҳангоми кор бо батареяҳо ҳамеша муҳофизати чашмро пӯшед.
• Do not operate the jump starter if it is damaged.
• Keep the jump starter away from children.
• Маҳсулотро дар шароити борон ё тар намонед.
• Ensure proper polarity connection (red to positive, black to negative) to avoid sparks or damage.
• Do not use the air compressor continuously for extended periods to prevent overheating. Allow it to cool down between uses.
• Дастгоҳро дар ҷои хунук ва хушк, дур аз нури бевоситаи офтоб нигоҳ доред.

2. Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳама ашё дар бастаи шумо мавҷуданд:

• 1 x AsperX AX260 Jump Starter with Air Compressor
• 1 x кабели Smart Jumper
• 1 x USB-A ба кабели USB-C
• 1 x халтаи борбардорӣ
• 1 x Pump Tube
• 3 x Нозулҳои ҳавоӣ
• 1 x Дастури корбар

3. Маҳсулот ба охир расидview

The AsperX AX260 is a versatile device combining a powerful jump starter, an air compressor, a power bank, and an LED flashlight. It features a 3.4-inch LCD display for easy operation and monitoring.

Хусусиятҳои асосӣ инҳоянд:

• Ҷараёни авҷи 3000A: Capable of starting 12V vehicles with up to 10L Gas and 8.0L Diesel engines.
• Компрессори ҳавоии 150 PSI: Features tire pressure detection and adjustable inflation modes (PSI, BAR, KPA).
• Advanced Battery Protection System: Over 10 types of safety protections for secure operation.
• Чароғи LED 400 люмен: Offers constant lighting, flash, and SOS modes.
• Функсияи бонки барқ: USB-A output and USB-C input for charging electronic devices.

4. Танзимот

Before initial use, fully charge the AsperX AX260 jump starter. Use the provided USB-A to USB-C cable to charge the device. The LCD display will indicate the charging status.

5. Дастурҳои истифодабарӣ

5.1. Ҷаҳиш ба кор андохтани мошин

The AX260 can jump start 12V vehicles with up to 10L gas or 8.0L diesel engines.

1. Insert the smart jumper cable into the 12V auto start connector port on the AX260 jump starter.
2. Кл сурхро пайваст кунедamp ба терминали мусбат (+) батареяи нақлиёт ва cl сиёҳamp ба терминали манфӣ (-).
3. Ensure the connections are secure. The LCD display on the jump starter will indicate correct operation. If the car battery voltage is below 0V, press the 'BOOST' button on the jump starter.
4. Start your car engine immediately.
5. Once the engine starts, remove the jumper cables from the vehicle battery, then from the jump starter.

5.2. Using the Air Compressor

The AX260's air compressor supports 3 optional units (PSI, BAR, KPA) and features automatic inflation stop.

1. Connect the pump tube to the air inflation opening on the AX260.
2. Attach the appropriate air nozzle to the pump tube and secure it to the item you wish to inflate (e.g., tire valve).
3. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball).
4. Барои муқаррар кардани фишори дилхоҳ тугмаҳои '+' ва '-'-ро истифода баред.
5. Long press the 'OK' button to start inflation. The device will automatically stop once the set pressure is reached.

5.3. Функсияи бонки барқӣ

The AX260 can charge various electronic devices via its USB ports.

• Connect your device's charging cable to the USB-A output port on the AX260.
• Дастгоҳ ба таври худкор пуркунии барқро оғоз мекунад.

5.4. Чароғаки LED

The 400-lumen LED light offers multiple modes for different situations.

• l-ро пахш кунедamp switch button to cycle through the modes: constant lighting, flash, and SOS.
• Л нигоҳ доредamp switch button to turn off the light.

6. Нигоҳдорӣ

• Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.
• Дастгоҳро бо матои хушк ва нарм тоза кунед. Аз маводи кимиёвии сахт ё маводҳои абразивӣ истифода набаред.
• Дар ҷои хунук ва хушк нигоҳ доред. Аз ҳарорати аз ҳад зиёд канорагирӣ кунед.

7. Баррасии мушкилот

• Дастгоҳ фаъол нест: Ensure the device is charged. If fully charged and still not turning on, contact customer support.
• Vehicle not starting: Check that the jumper cables are correctly connected to the battery terminals. Ensure the jump starter has sufficient charge. If the battery is deeply discharged (below 0V), use the 'BOOST' function.
• Air compressor not inflating: Verify the pump tube and air nozzle are securely attached. Check that the desired pressure is set and the 'OK' button is long-pressed to start. Ensure the device has sufficient charge.
• Air compressor overheating: If the air compressor becomes hot during use, allow it to cool down for several minutes before resuming operation. Continuous use for very long periods can cause overheating.
• Incorrect tire pressure reading: Ensure the air nozzle is properly sealed to the tire valve.

8. Мушаххасоти

9. Видеоҳои расмии маҳсулот

The following videos provide additional information and demonstrations of the AsperX AX260 Jump Starter with Air Compressor:

10. Кафолат ва дастгирӣ

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official AsperX webсайт. Квитансияи хариди худро барои даъвоҳои кафолат нигоҳ доред.