Hurricane Classic 6-Inch Clip-On Table Fan Instruction Manual

Муқаддима

Thank you for choosing the Hurricane Classic 6-Inch Clip-On Table Fan. This portable corded electric fan is designed to provide personal cooling with its two quiet speeds and adjustable tilt feature. It is suitable for various environments such as desks, shelves, homes, offices, or dorms. Please read this manual carefully before use to ensure proper operation and maintenance.

Маълумоти муҳим оид ба бехатарӣ

Please read and save these safety instructions. Failure to follow these instructions may result in electric shock, fire, or injury.

• Пеш аз тоза кардан ё анҷом додани ҳама гуна хидматрасонӣ ҳамеша вентиляторро аз розетка ҷудо кунед.
• Вентиляторро дар наздикии об ё дар муҳитҳои аз ҳад намнок истифода набаред.
• Ҳангоми кор кардани вентилятор ангуштон ва дигар ашёро аз теғҳои вентилятор дур нигоҳ доред.
• Боварӣ ҳосил кунед, ки сими барқӣ осеб надидааст ё фишурда нашудааст. Вентиляторро бо сими ё васлаки вайроншуда кор надиҳед.
• Do not place the fan on unstable surfaces.
• Ин вентилятор танҳо барои истифодаи дохилӣ аст.
• Do not attempt to repair or modify the fan yourself. Contact qualified service personnel for repairs.

Дастурҳои насб

Your Hurricane Classic Clip-On Fan is designed for easy setup and versatile placement.

Монтажи вентилятор

The fan features a robust clip-on mechanism for secure attachment to various surfaces.

1. Identify a stable surface, such as a desk, shelf, or table edge, that is up to 2 inches thick.
2. Open the fan's clip by pressing the handles together.
3. Position the fan on the desired surface and release the handles to secure the clip firmly. Ensure the fan is stable and does not wobble.

Image: The Hurricane 6-inch clip-on fan attached to a desk, demonstrating its mounting capability.

Тасвир: Муфассал view of the fan's clip, illustrating its ability to attach to surfaces up to 2 inches thick.

Танзими Тилт

Сари вентиляторро метавон барои равона кардани ҷараёни ҳаво маҳз дар ҷои зарурӣ майл кард.

1. Gently hold the fan head and adjust it to the desired upward or downward angle.
2. The fan is designed to hold its position once adjusted.

Image: The fan head tilted at various angles, demonstrating its adjustable tilt feature.

Дастурҳои амалиётӣ

Фаъолсозии барқ ​​ва назорати суръат

The fan features a 2-speed control switch located on the fan housing.

1. Вентельро ба васлаки барқии стандартӣ пайваст кунед.
2. Locate the switch on the back of the fan.
3. Slide the switch to position "1" for low speed or "2" for high speed.
4. To turn off the fan, slide the switch to the "0" position.

Image: A close-up of the fan's rear, showing the 2-speed control switch labeled '1' and '2'.

Нигоҳдорӣ

Тозакунии мунтазам ба нигоҳ доштани кори вентилятор ва дароз кардани мӯҳлати хизмати он мусоидат мекунад.

• Тозакунӣ: Unplug the fan before cleaning. Use a soft, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or allow water to drip into the motor housing.
• Нигоҳдорӣ: Ҳангоми дар муддати тӯлонӣ истифода нашудан, вентиляторро дар ҷои хунук ва хушк нигоҳ доред, беҳтараш дар бастаи аслии худ.
• Молдан лозим нест: Муҳаррики вентилятор доимӣ молидан аст ва ба равғани иловагӣ ниёз надорад.

Мушкилкушо

This section addresses common issues you might encounter with your Hurricane Classic Clip-On Fan.

Fan Does Not Turn On (No Power)

If your fan has no power after 3 years of use, or at any time, check the fuse located in the plug.

• Васлаки барқро тафтиш кунед: Ensure the outlet is functioning by plugging in another appliance.
• Фирӯзаро тафтиш кунед: Many fans include a fuse within the plug. Carefully open the fuse compartment (refer to the plug's specific design) and check if the fuse is blown. Replace with a fuse of the same rating if necessary.
• Сими барқро тафтиш кунед: Look for any visible damage to the cord or plug. If damaged, discontinue use and contact customer support.

Oscillation Function Not Working Correctly

If the oscillation only works when actively pulling down on the oscillation cord, it indicates the mechanism may not be fully engaged.

• Engaging Oscillation: Pull the oscillation cord firmly downwards until you hear a distinct "click." This ensures the oscillation mechanism is fully engaged. If it does not click, try pulling slightly harder.
• Disengaging Oscillation: Pull the oscillation cord again to disengage the function.

Tilt Function Not Holding Position

If the fan head springs back up after being tilted, the internal gear system may need to be reset.

• Repeated Adjustment: Gently pull the fan head down to the desired tilt position. If it springs back, repeat the action several times. The internal gears should eventually engage and hold the position as intended.

Мушаххасоти

Кафолат ва дастгирӣ

For warranty information or technical support, please refer to the product packaging or contact Hurricane customer service. Keep your purchase receipt as proof of purchase.