Phanteks XT View Дастури истифодабарии шасси бозиҳои Mid-Tower

1. Муқаддима

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Хусусиятҳои асосӣ:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳама ҷузъҳо дар баста мавҷуданд:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Галстукҳо (30х)
  • MB/SSD Screws (30x)
  • Виддаҳои ангуштзанӣ (4х)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Танзим ва насб

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View шасси.

3.1. Тайёр кардани шасси

1. Кушодани: Бодиққат корпусро аз бастабандӣ берун кунед.
2. Панелҳоро хориҷ кунед: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Тасвири 3.1: дохилӣ view of the XT View chassis, ready for component installation.

3.2. Насб кардани плата

1. Ҷойгиркунии Standoffs: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Place Motherboard: Carefully align your motherboard with the standoffs and I/O shield opening.
3. Модератори бехатар: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Насби воҳиди таъминоти барқ ​​(PSU).

1. Вазифаи PSU: Slide the PSU into its designated compartment at the bottom rear of the chassis.
2. Қувваи барқи бехатар: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Насби диски нигаҳдорӣ

The chassis supports 3.5" HDDs and 2.5" SSDs.

• 3.5" HDD: Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• SSD 2.5 дюйм: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Secure drives with the appropriate screws.

3.5. Насби корти васеъкунӣ (GPU)

1. Сарпӯшҳои слотро хориҷ кунед: Сарпӯшҳои зарурии слотҳои васеъкуниро аз қафои шасси хориҷ кунед.
2. Кортро ворид кунед: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Корти бехатар: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Тасвири 3.2: Қисми дохилии қафо view highlighting expansion slots and fan mounting points.

3.6. Насби вентилятор ва радиатор

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Top: Up to 360mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Идоракунии кабел

Барои ташкили кабелҳо аз каналҳои масири кабелӣ ва нуқтаҳои пайвастшавӣ дар паси табақи motherboard истифода баред. Ин ҷараёни ҳаво ва эстетикаро беҳтар мекунад.

Тасвири 3.3: Қафо view illustrating cable management space.

3.8. Пайвасткунакҳои пеши вуруд/Чор

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• Сарлавҳаи USB 3.0
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Дастурҳои истифодабарӣ

4.1. Фаъол/хомӯш

-ро пахш кунед Тугмаи барқ located on the top front panel to turn the system on or off.

4.2. Front Panel Connectivity

The front I/O panel provides convenient access to:

• 1x порти USB 3.0
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. Нигоҳдорӣ

5.1. Тоза кардани филтрҳои чанг

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Филтрҳоро нест кунед: Gently slide out or unclip the dust filters.
2. Тоза: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. Аз нав насб кунед: Place the clean, dry filters back into their positions.

5.2. Тозакунии умумӣ

Барои сатҳҳои беруна, аз матои мулоим истифода баред, damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. Баррасии мушкилот

Ин бахш мушкилоти умумиеро, ки шумо метавонед дучор ояд, баррасӣ мекунад.

6.1. Система фаъол намешавад

• Пайвастҳои барқ: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Motherboard Connections: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Front Panel Header: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Синхронизатсияи motherboard: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Функсияи тугма: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Пайвастшавӣ: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• Монеаҳо: Check for any cables or objects obstructing fan blades.
• Чанг: Clean any dust buildup on fan blades.

7. Мушаххасоти

8. Дастгирӣ ва кафолат

For additional information, technical support, or warranty inquiries, please visit the official Phanteks webсайт:

www.phanteks.com

Refer to the Phanteks webбарои гирифтани шартҳо ва қоидаҳои кафолати навтарин, ки ба минтақаи шумо татбиқ мешаванд, ба сайт муроҷиат кунед.