Муқаддима
This manual provides detailed instructions for the installation, operation, and maintenance of your darkFlash DB330M Micro-ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage. The DB330M case features a 270° panoramic tempered glass panel, pre-installed PWM ARGB fans, and a high-speed I/O panel.
Маълумот оид ба бехатарӣ
- Пеш аз насб ё хидматрасонии ҳама гуна ҷузъҳои дохили корпуси компютер, ҳамеша манбаи барқро аз розеткаи деворӣ ҷудо кунед.
- Handle tempered glass panels with care to prevent breakage. Avoid impacts or sharp objects.
- Wear anti-static gloves or use an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to sensitive components.
- Қисмҳои хурд ва винтҳоро аз кӯдакон дур нигоҳ доред.
- Барои пешгирӣ аз гармшавии аз ҳад зиёд, вентилятсияи дурусти атрофи корпуси компютерро таъмин кунед.
Мундариҷаи баста
Боварӣ ҳосил кунед, ки ҳама ашё дар баста мавҷуд аст:
- darkFlash DB330M Micro-ATX PC Case
- 3 x Pre-installed PWM ARGB Fans
- Accessory Box (screws, cable ties, etc.)
- Дастури корбар (ин ҳуҷҷат)
Хусусиятҳо тамом шудандview
- 270° Panoramic Tempered Glass: Фарогирии васеъро фароҳам меорад view of internal components and RGB lighting.
- High-Speed I/O Panel: Includes USB 3.0 and Type-C ports for fast data transfer.
- Vertical Airflow Cooling: Optimized design with pre-installed fans for efficient heat dissipation.
- Magnetic Dust Filters: Located on top and bottom to keep components clean.
- Насби осон: User-friendly design for hassle-free assembly and maintenance.
Мушаххасоти
| Хусусият | Мушаххасоти |
|---|---|
| Номи модел | DB330M PC CASE |
| Андозаҳо (LxWxH) | 8.58"D x 13.11"W x 15.75"H (218mm x 333mm x 400mm) |
| Мутобиқати motherboard | Micro ATX, ITX |
| Навъи парванда | Бурҷи Миди |
| Материал | Plastic, Tempered Glass |
| Мухлисони пешакӣ насбшуда | Вентиляторҳои PWM ARGB 3 x 120 мм |
| Баландии максималии CPU сардтар | 180мм |
| Тозакунии максималии GPU | 305мм |
| Дастгирии радиатор (боло) | То 240мм |
| Навъи васлкунии таъминоти барқ | Bottom Mount (Max 140mm PSU length) |
| Портҳои воридотӣ / баромад | 1 x USB 3.0, 1 x Type-C, Audio In/Out |
Насб ва насб
1. Accessing the Interior (Quick Release Design)
The darkFlash DB330M features a quick-release design for easy access to internal components. The tempered glass panels can be removed by gently pulling them away from the chassis. The top panel also detaches for fan/radiator installation.
2. Насб кардани плата
Install your Micro-ATX or ITX motherboard into the designated area. Ensure standoffs are correctly aligned and secured. The case supports CPU coolers up to 180mm in height and GPUs up to 305mm in length.
3. Fan and Cooling System Installation
The case comes with three pre-installed 120mm PWM ARGB fans. Two fans are located at the top, and one at the rear. Additional fan mounts are available at the bottom (up to 2 x 120mm) for enhanced airflow. The case supports a 240mm AIO radiator on the top panel.
The pre-installed fans are PWM ARGB type, offering speed adjustment and rich lighting modes with motherboard synchronization. Note: An RGB hub controller is not included.
4. Power Supply and Storage Installation
Install your power supply unit (PSU) in the bottom mount. The case supports PSUs up to 140mm in length. Utilize the standard hard drive cage for storage devices.
5. Connecting Front I/O Panel
Connect the front I/O panel cables to your motherboard. The panel includes a Type-C port, USB 3.0 port, and USB 2.0 port for various connectivity needs.
6. Идоракунии кабел
Utilize the cable routing options and tie-downs behind the motherboard tray to ensure clean cable management. This improves airflow and aesthetics.
Дастурҳои амалиётӣ
1. Фаъолкунӣ
After all components are securely installed and connected, plug in the power cable to your PSU and press the power button on the front I/O panel to start your system.
2. Идоракунии вентиляторҳои ARGB
The pre-installed ARGB fans can be controlled via compatible motherboard software (if connected to an ARGB header) to customize lighting effects and fan speeds. Refer to your motherboard manual for specific software instructions.
3. Airflow Configuration
The DB330M is designed with optimized airflow channels. The pre-installed fans facilitate vertical airflow, with the fan above the PSU directing air towards the graphics card. Ensure no obstructions block the airflow paths.
Нигоҳдорӣ
1. Тоза кардани филтри чанг
Regularly clean the magnetic dust filters located on the top and bottom of the case. Gently remove the filters and clean them with compressed air or a soft brush. Reattach them securely after cleaning.
2. Тозакунии умумӣ
Use a soft, dry cloth to wipe down the exterior of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth. Avoid abrasive cleaners or solvents.
Мушкилкушо
- Компютер фаъол намешавад:
- Ensure the power supply is properly connected to the wall and the PSU switch is in the 'ON' position.
- Verify all power cables from the PSU are securely connected to the motherboard and components.
- Check the front panel power switch connection to the motherboard.
- Вентиляторҳо чарх намезананд/RGB кор намекунад:
- Тасдиқ кунед, ки кабелҳои барқии мухлис ба motherboard ё контролери мухлис пайвастанд.
- Ensure ARGB cables are connected to a compatible ARGB header on the motherboard or an ARGB controller.
- Check motherboard software settings for fan speed and RGB control.
- Портҳои USB кор намекунанд:
- Verify the front panel USB 3.0 and Type-C cables are correctly plugged into the corresponding headers on your motherboard.
- Боварӣ ҳосил кунед, ки драйверҳои motherboard навсозӣ шудаанд.
Кафолат ва дастгирӣ
darkFlash provides a Кафолати 1-сола for this computer case. For technical support, warranty claims, or further assistance, please contact darkFlash customer service through their official webба сомона ё фурӯшандае, ки маҳсулот аз он харида шудааст, муроҷиат кунед. Лутфан, ҳуҷҷати хариди худро барои эътибори кафолат нигоҳ доред.
Official darkFlash Webсайт: www.darkflash.com