Fein Cordless Angle Grinder CCG 18-115-12 AS Instruction Manual

1. Муқаддима

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Fein Cordless Angle Grinder CCG 18-115-12 AS. This powerful and dust-resistant tool is designed for cutting, grinding, and deburring work on various materials. It features an 18V brushless motor, a 115 mm grinding wheel diameter, and is compatible with AMPShare ProCORE batteries.

2. Дастурамал оид ба бехатарӣ

Барои пешгирӣ аз ҷароҳат ва вайроншавии асбоб ҳамеша чораҳои бехатарии зеринро риоя кунед:

• Таҷҳизоти муҳофизати инфиродӣ (PPE) пӯшед: Ҳамеша айнакҳои муҳофизатӣ, муҳофизати шунавоӣ, дастпӯшакҳо ва ниқоби чангро истифода баред.
• Корти бехатар: Ensure the material being worked on is firmly clampбарои пешгирӣ аз ҳаракат ҳангоми кор бо чӯб маҳкам карда ё мустаҳкам карда шудааст.
• Maintain Proper Grip: Hold the angle grinder firmly with both hands, ensuring a stable stance.
• Тафтиши зарар: Before each use, inspect the tool, battery, and accessories for any damage. Do not use damaged equipment.
• Use Correct Accessories: Only use grinding and cutting discs that are rated for the tool's speed and diameter (115 mm).
• Adjust Guard: Ensure the protective guard is correctly positioned to deflect sparks and debris away from you.
• Аз ҳад зиёд даст кашед: Maintain balance and control at all times.
• Майдони корро тоза нигоҳ доред: Remove flammable materials and ensure adequate ventilation.
• Хомӯш кардани барқ: Always remove the battery pack before making any adjustments, changing accessories, or performing maintenance.
• Муҳофизати аз нав оғоз кардани: The tool features restart protection. If power is interrupted, the tool will not restart automatically when power is restored.
• Муҳофизати аз ҳад зиёди электронӣ: The tool will shut off if overloaded to prevent damage. Reduce pressure and allow the tool to cool.

3. Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳама ашё дар баста мавҷуд аст:

• 1 x Fein Cordless Angle Grinder CCG 18-115-12 AS
• 1 x Separation Protection Cover
• 1 x Tool-free Quick Release Nut
• 1 x Anti-vibration Handle
• 1 x Key (for disc changes if not using quick release)
• 1 x Plastic Tool Box (L-BOXX 238)

4. Танзимот

Before operating the angle grinder, ensure it is properly assembled and configured.

4.1 Насби батарея

1. Ensure the battery is fully charged. The Fein Cordless Angle Grinder is compatible with all 18V AMPShare ProCORE batteries.
2. Батареяро бо порти батарея дар асбоб мувофиқ кунед.
3. Батареяро ба порт лағжонед, то он даме, ки он бехатар дар ҷои худ клик кунад.
4. Барои хориҷ кардан, тугмаи раҳокуниро дар батарея пахш кунед ва онро лағжонед.

4.2 Танзими посбон

The separation protection cover must always be used. Adjust its position to provide maximum protection for the specific application.

• Loosen the guard's locking mechanism.
• Rotate the guard to the desired position, ensuring it deflects sparks and debris away from the operator.
• Tighten the locking mechanism securely.

4.3 Disc Installation (Grinding/Cutting)

Always ensure the battery is removed before changing discs.

1. Тугмаи қулфи шпиндельро пахш карда нигоҳ доред.
2. If using the tool-free quick release nut: Unscrew the quick release nut by hand. Remove the old disc and the lower flange.
3. Place the new 115 mm grinding or cutting disc onto the spindle, ensuring it sits correctly on the lower flange.
4. Screw the quick release nut back on and tighten it firmly by hand. Release the spindle lock.
5. If using a standard nut and key: Use the provided key to loosen and tighten the nut.

Image: A user demonstrating the installation of a grinding disc onto the angle grinder. The tool-free quick release nut is visible.

4.4 Anti-vibration Handle Attachment

Attach the anti-vibration handle to either side of the gear housing for improved comfort and control during operation.

• Screw the anti-vibration handle into one of the threaded holes on the side of the grinder head.
• Онро бо даст маҳкам маҳкам кунед.

5. Дастурҳои истифодабарӣ

Familiarize yourself with the tool's controls and proper operating techniques.

5.1 Powering On/Off and Speed Preselection

• Фаъолкунӣ: Slide the power switch forward. The tool features a soft start function for smooth power-up.
• Хомӯш кардан: Тугмаи барқро ба ҳолати OFF ба қафо лағжонед.
• Electronic Speed Preselection: Use the speed dial to select the desired idle speed between 2,500 and 8,500 min⁻¹. Adjust the speed according to the material and application.

5.2 Усулҳои буридан ва майда кардан

Always maintain a firm grip and stable body position. Let the tool do the work; avoid excessive pressure.

Image: A worker grinding a metal bar with the Fein angle grinder, demonstrating proper technique and safety gear.

• Суфтакунӣ: Apply light, even pressure. Move the grinder smoothly across the surface. The tool's vibration damper helps ensure smooth operation.
• Буридани: For cutting, use a cutting disc and ensure the workpiece is securely clamped. Make straight cuts, allowing the disc to cut without forcing it.

Image: A worker cutting a metal pipe with the Fein angle grinder, showing the sparks generated during the process.

Image: A worker performing a cutting operation on a metal bar with the Fein angle grinder, highlighting the tool's performance.

5.3 Хусусиятҳои пешрафта

• Blocking Monitoring: The tool is equipped with blocking monitoring, which helps prevent kickback if the disc jams.
• Мониторинги ҳарорат: Innovative cooling fin technology and temperature monitoring protect the motor and battery from overheating during intensive use.

6. Нигоҳдорӣ

Regular maintenance ensures the longevity and optimal performance of your angle grinder.

• Тозакунӣ: The robust motor housing is designed to be dust resistant. Regularly clean the tool's ventilation slots and exterior with a soft brush or compressed air to remove dust and debris. Ensure the battery is removed before cleaning.
• Санҷиши диск: Before each use, inspect grinding and cutting discs for cracks, chips, or excessive wear. Replace damaged or worn discs immediately.
• Нигоҳубини батарея: Store batteries in a cool, dry place. The Coolpack 2.0 technology helps extend battery life; however, avoid fully discharging batteries and charge them regularly.
• Санҷиши умумӣ: Periodically check all screws and fasteners for tightness. Ensure the guard operates smoothly and locks securely.

7. Баррасии мушкилот

Барои масъалаҳои умумӣ ва роҳҳои ҳалли онҳо ба ин бахш муроҷиат кунед.

8. Мушаххасоти

Technical data for the Fein Cordless Angle Grinder CCG 18-115-12 AS:

• Модели: CCG 18-115-12 AS
• Ҳаҷми батареяtage: 18 В
• Мутобиқати батарея: Li-ion/ProCORE Li-ion (AMPShare compatible)
• Мотор: Бе хасу
• Суръати бекорӣ: 2,500 - 8,500 min⁻¹ (stepless electronic speed preselection)
• Диаметри чархи суфтакунӣ: 115 мм
• Elastic Sanding Disc Diameter: 115 мм
• Флагҳо: М 14
• Вазн (бе батарея): 2.20 кг
• Андозаҳои маҳсулот (L x W x H): 35.7 х 25.3 х 44.2 см
• Мавод: Metal, aluminium, copper, plastic
• Функсияҳо: Soft start, Restart protection, Electronic overload protection, Electronic speed preselection, Blocking monitoring, Vibration damper (4 additional), Temperature monitoring (Coolpack 2.0 technology)

9. Кафолат ва дастгирӣ

For warranty information, technical support, or service inquiries, please refer to the official Fein website or contact your authorized Fein dealer. Keep your purchase receipt as proof of purchase.

Fein Official Webсайт: www.fein.com