YESWELDER FLUX-135 MINI 135Amp 3-in-1 Welder Instruction Manual

1. Маҳсулот ба охир расидview

The YESWELDER FLUX-135 MINI is a versatile 135Amp 3-in-1 welding machine designed for various welding tasks. It supports Flux Core Gasless MIG, Stick, and Lift TIG welding processes. This machine is suitable for both beginners and experienced welders due to its intuitive controls and synergic features.

Расми 1: Пеш view of the YESWELDER FLUX-135 MINI welding machine.

Хусусиятҳои асосӣ:

• Multi-Process Capability: Supports Flux Core Gasless MIG, Stick, and Lift TIG welding.
• Назорати синергетикӣ: Automatically matches recommended voltage when adjusting wire feed speed for optimized welding parameters.
• Амалиёт осон: Intuitive control panel for straightforward adjustment of welding modes, voltage, and current/wire feed speed.
• Тарҳрезии компакт: Mini size for portability and convenience.

Figure 2: The 3-in-1 multi-function welding machine illustrating Flux Cored, Lift TIG, and Stick welding capabilities.

2. Маълумот оид ба бехатарӣ

Welding can be hazardous. Always follow safety precautions to prevent injury or damage. Read and understand all safety warnings and instructions before operating this equipment.

Чорабиниҳои умумии бехатарӣ:

• Зарбаи барқ: Can kill. Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Ensure the welding machine is properly grounded.
• Дудҳо ва газҳо: Can be hazardous to your health. Keep your head out of the fumes. Use ventilation or exhaust to remove fumes from the breathing zone and general area.
• Нурҳои камон: Can burn eyes and skin. Wear a welding helmet with a proper shade filter and protective clothing.
• Сӯхтор ва таркиш: Welding sparks and hot metal can cause fires. Keep flammable materials away from the welding area. Have a fire extinguisher nearby.
• Қисмҳои гарм: Can cause severe burns. Allow equipment to cool before touching.
• Садо: Excessive noise can damage hearing. Wear ear protection.
• Минтақаи корӣ: Keep the work area clean, dry, and free from clutter. Ensure adequate lighting.

3. Танзим ва насб

3.1 Пайвастшавии барқ

Connect the welder to a standard 110V AC power outlet. Ensure the power source is capable of providing sufficient current for the welding operations.

3.2 Welding Wire Installation (Flux Core MIG)

1. Open the wire feeder compartment.
2. Place a 2LB (4-inch spool diameter) welding wire spool onto the spindle. The FLUX-135 MINI is compatible with .030"/.08mm flux cored wire.
3. Thread the wire through the guide tube and into the drive roller mechanism.
4. Close the drive roller tension arm and adjust the tension appropriately.
5. Feed the wire through the MIG torch liner until it exits the nozzle.

Figure 3: Installation of a 2LB gasless flux cored welding wire spool.

3.3 Electrode/Torch Connections

• кафшери MIG: The MIG torch is typically pre-connected. Ensure the ground clamp is securely attached to the workpiece.
• Stick Welding: Дорандаи электродро ба терминали мусбат (+) ва пайвасткунаки заминӣ пайваст кунедamp to the negative (-) terminal for most common electrodes. Refer to electrode manufacturer specifications.
• Кафшери TIG-ро бардоред: An additional Lift TIG torch (not included) is required. Connect the TIG torch to the negative (-) terminal and the ground clamp ба терминали мусбат (+).

4. Дастурҳои истифодабарӣ

4.1 Панели идоракунӣview

The FLUX-135 MINI features a simple and intuitive control panel. It includes a digital display, mode selection knob, and adjustment knobs for voltage/current and wire feed speed.

Расми 4: Муфассал view of the control panel, highlighting synergic control and efficiency.

4.2 Интихоби режим

Use the mode selection knob to choose between Flux MIG, Stick, or Lift TIG welding processes.

4.3 Synergic Control and Parameter Adjustment

The synergic control feature simplifies parameter setting. When operating in Flux MIG mode, adjusting the wire feed speed knob will automatically suggest the corresponding voltage for optimal welding performance. For Stick and Lift TIG modes, the knobs will adjust current (ampтоза кардан).

4.4 Welding Processes

• Flux Core Gasless MIG Welding:
  This mode uses flux-cored wire, eliminating the need for external shielding gas. Select Flux MIG mode, set your wire feed speed (voltage will adjust synergically), and begin welding. Ensure proper stick-out and travel speed for best results.
• Stick Welding (SMAW):
  Select Stick mode. Insert the appropriate electrode into the electrode holder. Adjust the current (amperage) based on the electrode type and material thickness. Maintain a consistent arc length and travel speed.
• Lift TIG Welding (GTAW):
  Note: Requires an additional Lift TIG torch (not included). Select Lift TIG mode. Connect the TIG torch and ground clamp as described in Section 3.3. Use ER70S-6 mild steel TIG welding rods for fabrication of mild steel. Initiate the arc by gently touching the tungsten electrode to the workpiece and then lifting it slightly. Adjust current (amperage) as needed.
  

  Figure 5: YESWELDER ER70S-6 mild steel TIG welding rods.
  

  Figure 6: ER70S-6 TIG welding rods available in 1/16", 3/32", and 1/8" diameters, all 16" long.

  

  Figure 7: An operator performing Lift TIG welding.

5. Нигоҳдорӣ

Нигоҳдории мунтазам дарозумрӣ ва кори оптималии мошини кафшерии шуморо таъмин мекунад.

5.1 Тозакунӣ

• Қисми берунии дастгоҳро мунтазам бо матои хушк ва нарм тоза кунед.
• Use compressed air to blow out dust and debris from the cooling vents. Ensure the machine is unplugged before cleaning.

5.2 Санҷиши кабел ва пайвастшавӣ

• Regularly inspect all welding cables, torch leads, and ground clamps for signs of wear, damage, or loose connections. Replace damaged components immediately.
• Боварӣ ҳосил кунед, ки ҳама пайвастҳои барқӣ сахт ва бехатар мебошанд.

5.3 Wire Feeder Maintenance (MIG)

• Clean the drive rollers and wire guide tubes to prevent wire feeding issues.
• Check the MIG torch liner for blockages or wear. Replace if necessary.

6. Баррасии мушкилот

Ин бахш роҳҳои ҳалли мушкилоти умумӣ, ки шумо метавонед дучор шавед, пешниҳод мекунад.

Агар шумо бо мушкилоте дучор шавед, ки дар ин ҷо номбар нашудаанд ё агар мушкилот идома ёбад, лутфан бо дастгирии муштариён тамос гиред.

7. Мушаххасоти

Technical specifications for the YESWELDER FLUX-135 MINI.

8. Маълумот дар бораи кафолат

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official YESWELDER webсайт барои шартҳо ва шартҳои кафолати муфассал. Барои даъвоҳои кафолат далели хариди худро нигоҳ доред.

9. Дастгирии муштариён

For technical assistance, spare parts, or any inquiries regarding your YESWELDER FLUX-135 MINI, please contact YESWELDER customer support. You can typically find contact information on the official YESWELDER webсайт ё тавассути фурӯшандаи худ.

Манбаъҳои онлайн: Боздид кунед YESWELDER Store on Amazon барои маълумот ва дастгирии маҳсулот.