WEIZE 11000 lbs 2 Post Automotive Lift Instruction Manual

1. Маҳсулот ба охир расидview

The WEIZE 11000 lbs 2 Post Automotive Lift is engineered for professional use, offering a robust lifting capacity suitable for a wide range of vehicles, from compact cars to light-duty trucks and SUVs. Its design prioritizes safety and efficiency in garage and workshop environments.

• Сохтмони вазнин: Engineered for professional use, this 2-post car lift boasts a robust 11,000 lbs. lifting capacity.
• Барномаҳои гуногунҷанба: Suitable for servicing a wide range of vehicles, from compact cars to light-duty trucks and SUVs.
• Воҳиди гидротехникӣ: Features a 220V 60Hz 1 Phase 3 HP Hydraulic Power Unit for enhanced safety and efficiency.
• Хусусиятҳои бехатарӣ: Equipped with a double point safety lock release mechanism.
• Тарҳрезии сарфакунандаи фазо: The 2-post configuration maximizes workspace while minimizing the overall footprint in your garage or shop.

2. Дастурамал оид ба бехатарӣ

Always prioritize safety when operating the automotive lift. Failure to follow these instructions may result in serious injury or death.

• Read and understand the entire manual before installation and operation.
• Боварӣ ҳосил кунед, ки лифт дар таҳкурсии ҳамвор ва мустаҳками бетонӣ насб карда шудааст, ки қодир ба бардоштани вазн ва бори максималии лифт бошад.
• Танҳо кормандони дорои омӯзонидашуда ва ваколатдор бояд лифтро идора кунанд.
• Never exceed the maximum rated lifting capacity of 11,000 lbs.
• Always ensure the safety locks are engaged before working under a vehicle.
• Ҳангоми кор дастҳо ва пойҳоро аз қисмҳои ҳаракаткунанда дур нигоҳ доред.
• Ensure proper vehicle positioning on the lift arms and use appropriate adapters.
• Regularly inspect the lift for any signs of wear, damage, or malfunction.
• Майдони корро тоза ва аз монеаҳо холӣ нигоҳ доред.

3. Қисмҳои маҳсулот

The WEIZE 11000 lbs 2 Post Automotive Lift includes the following main components:

• Two Post Lift Assembly
• Power Unit (220V 3HP)
• Lifting Arms (2-stagд ва 3-сtage)
• Height Extension Holders
• Height Extensions
• Pick-up Adapters
• Шланги нафт
• Floor Plate & Floor Plate Cover
• Safety Brake Cable & Control Handle
• Main Column Brake Cable Switch Cover & Side Column Brake Cable Switch Cover

Image: Detailed breakdown of all components included with the WEIZE 11000 lbs 2 Post Car Lift.

4. Танзим ва насб

Proper installation is crucial for the safe and efficient operation of your WEIZE automotive lift. Refer to the detailed video guide below for step-by-step instructions.

Қадамҳои асосии насб:

1. Кушодан ва тафтиш: Carefully unpackage all components. Inspect for any damage or missing parts.
2. Column Placement: Position the columns accurately according to the provided dimensions. Ensure proper spacing and alignment.
3. Лангар: Securely anchor the columns to the concrete floor using the provided expansion bolts. Ensure bolts are tightened to the specified torque.
4. Масири кабелӣ: Route the steel cables through the pulleys and mechanisms as shown in the video, paying close attention to the threading direction.
5. Пайвастҳои гидравликӣ: Connect the hydraulic hoses between the power unit and the cylinders. Ensure all connections are tight and free of leaks.
6. Power Unit Installation: Mount the power unit to the main column and connect the electrical wiring (Live, Neutral, Ground).
7. Моеъи гидравликӣ: Fill the power unit reservoir with the recommended hydraulic oil, ensuring not to exceed the maximum level mark.
8. Насби дастӣ: Install the lifting arms, ensuring correct orientation (2-stage arms for the rear, 3-stage arms for the front).
9. Механизми қулфи бехатарӣ: Install and adjust the safety lock release mechanism and associated cables.
10. Давраи санҷишӣ: Perform a test run without a vehicle to ensure all components function correctly and safety locks engage properly.

5. Дастурҳои истифодабарӣ

Follow these steps for safe and effective operation of your automotive lift.

1. Ҷойгиркунии мошин: Drive the vehicle onto the lift, ensuring it is centered between the columns. Position the lifting arms under the vehicle's designated lifting points. Use height adjustment pads and truck adapters as needed.
2. Бардошт: Press and hold the UP button on the power unit. The lift will raise. Listen for a "click" sound, indicating the safety device is locked into place.
3. Қулфҳои бехатариро ба кор баред: Once the vehicle is at the desired height, lower the lift slightly until the safety locks engage. Never work under a vehicle unless the safety locks are fully engaged.
4. Паст кардан: First, slightly raise the platform by 5 cm to disengage the safety locks. Then, press the safety release handle and simultaneously press the pressure relief handle to complete the descent.

Image: A black sedan safely lifted by the WEIZE 11000 lbs 2 Post Automotive Lift, demonstrating proper vehicle positioning.

6. Maintenance and Care Instructions

Regular maintenance ensures the longevity and safe operation of your lift.

• Истифодаи ҳаррӯза: Check daily if the safety device can lock into place and if the linkage is functioning properly. If there are any potential hazards, repair or replace them promptly.
• Weekly Inspection: Inspect the steel wire for looseness or broken strands. Observe the sliding blocks on the internal platform of the columns and apply grease as needed. If wear on one side exceeds 20%, it will no longer be securely gripped by the columns and should be replaced in a timely manner.
• Bi-Weekly Check: Inspect all hydraulic hose connections for leaks or ruptures, and repair or replace them as necessary.
• Нигоҳдории моҳона: Check if all screws and nuts are tightened properly. After a test run, retighten all screws and nuts.

7. Баррасии мушкилот

If you encounter issues with your lift, refer to the following common problems and solutions:

• Lift does not raise: Check power supply, hydraulic fluid level, and motor functionality. Ensure all electrical connections are secure.
• Lift lowers unevenly: Inspect hydraulic lines for leaks, check cable tension, and ensure safety locks are disengaging properly on both sides.
• Садоҳои ғайриоддӣ ҳангоми кор: Check for loose components, worn pulleys, or insufficient lubrication.
• Hydraulic fluid leaks: Inspect all hose connections, seals, and cylinders for damage. Tighten connections or replace faulty components.
• Safety locks not engaging: Check the safety lock mechanism for obstructions or damage. Ensure cables are properly adjusted.

8. Мушаххасоти

9. Кафолат ва дастгирӣ

For warranty information, technical support, or to purchase replacement parts, please contact WEIZE Customer Support. Refer to your purchase documentation for specific warranty terms and contact details.

Шумо инчунин метавонед боздид кунед WEIZE Store on Amazon барои маълумоти иловагӣ оид ба маҳсулот ва захираҳои дастгирӣ.