JENABOM 3.6V Cordless Electric Screwdriver User Manual

1. Дастурамал оид ба бехатарӣ

Please read and understand all safety warnings and instructions before operating this electric screwdriver. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Бехатарии минтақаи корӣ: Майдони кори худро тоза ва равшан нигоҳ доред. Ҷойҳои бесарусомон ё торик ба садамаҳо даъват мекунанд. Асбобҳои барқиро дар муҳити тарканда, масалан, дар ҳузури моеъҳои оташгиранда, газҳо ё чанг истифода набаред.
• Бехатарии барқ: Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Бехатарии шахсӣ: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection.
• Истифодаи асбоб ва нигоҳубин: Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.

2. Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳама ашё дар бастаи шумо мавҷуданд:

• JENABOM 3.6V Cordless Electric Screwdriver
• Сими пуркунандаи USB
• 105-piece Accessory Set (various screwdriver bits, drills, screws, extension rods, magnetizer)
• Қуттии нигаҳдорӣ

This image displays the JENABOM 3.6V Cordless Electric Screwdriver, its USB charging cable, and the comprehensive 105-piece accessory kit, including various screwdriver bits, sockets, and a storage case.

The complete JENABOM electric screwdriver kit, including the tool and all 105 accessories, neatly stored in its dedicated carrying case for organization and portability.

3. Маҳсулот ба охир расидview

Familiarize yourself with the components of your electric screwdriver:

• Hex Collet: Accepts standard 1/4 inch (6.35mm) bits.
• Чароғаки кории LED: Майдони корро равшан мекунад.
• Тугмаҳои пеш/қафо: Controls the rotation direction.
• Charging and Torque Gear Indicator: Displays battery level and selected torque setting.
• Порти барқи USB: Барои пур кардани батареяи дохилӣ.
• Дастаки зиддилағзиш: Эргономикӣ барои чанголи бароҳат тарҳрезӣ шудааст.

This diagram illustrates the main features of the screwdriver, including the USB charging port, the 1/4 inch hex collet for standard bits, the LED indicator for charge and torque settings, and the forward/reverse control buttons.

4. Танзимот

4.1. Charging the Screwdriver

Before first use, fully charge the screwdriver. The built-in 1300mAh lithium-ion battery typically requires 3-5 hours for a full charge.

1. Locate the USB charging port on the screwdriver.
2. Connect the provided USB charging cable to the screwdriver's port.
3. Connect the other end of the USB cable to a compatible USB power source (e.g., computer, power bank, wall adapter).
4. The charging indicator lights will show the charging status. Once fully charged, the indicator will show a full battery.

The image shows the JENABOM electric screwdriver connected to a laptop via its USB cable for charging, demonstrating its convenient and versatile charging options.

4.2. Inserting Screwdriver Bits

The screwdriver features a magnetic hex collet for easy bit changes.

1. Select the appropriate 1/4 inch hex bit for your task.
2. Push the bit firmly into the hex collet until it is securely seated. The magnetic design will hold the bit in place.
3. To remove, simply pull the bit straight out.

This image illustrates the magnetic design of the screwdriver's chuck, allowing for quick and easy insertion and removal of screwdriver bits, both directly and with an extension pole.

5. Амалиёт

5.1. Powering On/Off and Direction Control

The screwdriver is activated by pressing and holding the appropriate button.

1. Гардиши пеш: Press and hold the forward button (usually indicated by an arrow pointing right or up) for 1 second to start driving screws.
2. Ротатсияи баръакс: Press and hold the reverse button (usually indicated by an arrow pointing left or down) for 1 second to remove screws.
3. Release the button to stop the screwdriver.

This image illustrates the forward and reverse control buttons on the screwdriver, indicating that a 1-second press is required to initiate operation and switch between modes.

5.2. Танзими моменти

The screwdriver features four adjustable torque settings, allowing you to match the power to the task and prevent over-tightening or damage.

1. The torque setting can be adjusted using the dedicated torque adjustment button or by cycling through the settings with the main power button (refer to the indicator lights).
2. Available torque levels range from 2.5 N.m to 5 N.m.
3. Select a lower torque for delicate tasks (e.g., electronics, soft materials) and a higher torque for more demanding applications (e.g., furniture assembly, harder materials).
4. When the set torque is reached, the mechanical clutch will disengage, preventing further tightening.

This graphic provides essential technical data for the screwdriver, detailing its 3.6V operating voltage, 1300mAh battery capacity, 200 RPM no-load speed, and the adjustable torque range from 2.5 N.m to 5 N.m across four settings.

This image demonstrates the functionality of the adjustable 4-level torque system, showing how it prevents damage to screws or materials by disengaging the clutch when the set torque is reached.

5.3. Чароғи кории LED

The integrated LED work light automatically activates when the screwdriver is in operation, providing illumination for dark or confined spaces.

An image depicting the screwdriver in operation, with its built-in LED work light actively illuminating the work area, enhancing visibility in low-light conditions.

This image highlights the effectiveness of the LED working light, demonstrating how it provides crucial illumination in dark environments for improved visibility during tasks.

6. Нигоҳдорӣ

Regular maintenance ensures optimal performance and extends the life of your screwdriver.

• Тозакунӣ: Keep the tool's ventilation openings clean to prevent overheating. Use a soft, damp матоъ барои тоза кардани берун. Моддаҳои кимиёвии сахт ё тозакунандаи абразивиро истифода набаред.
• Нигоҳубини каме: Store screwdriver bits in the provided case to prevent loss and damage. Replace worn or damaged bits to ensure efficient and safe operation.
• Нигоҳдорӣ: Store the screwdriver and accessories in a dry, secure location, away from direct sunlight and extreme temperatures.

7. Баррасии мушкилот

Агар шумо бо мушкилот рӯ ба рӯ шавед, ба мушкилоти умумӣ ва роҳҳои ҳалли зерин муроҷиат кунед:

8. Мушаххасоти

Key technical specifications for the JENABOM 3.6V Cordless Electric Screwdriver:

9. Кафолат ва дастгирӣ

For warranty information or technical support, please contact JENABOM customer service. Details can typically be found on the product packaging or the official JENABOM webсайт.

If you are not satisfied with your purchase, please feel free to contact us. JENABOM will reply to you within 24 hours.