ECOELER YM2601-WH

ECOELER Motion Sensor Dimmer Switch (Model YM2601-WH) Instruction Manual

Your guide to installation, operation, and maintenance of your ECOELER Motion Sensor Dimmer Switch.

1. Муқаддима

The ECOELER Motion Sensor Dimmer Switch provides convenient, hands-free lighting control with adjustable settings for various environments. This device integrates a motion sensor and an ambient light sensor to automate lighting based on presence and light levels, while also offering dimming capabilities for compatible bulbs. It is designed for single-pole circuits and requires a neutral wire for installation.

ECOELER PIR Motion Sensor Dimmer Switch with icons for advanced motion sensor, ambient light sensor, timer delay, fully dimmable, energy saving, and fire resistant features.

Тасвир: тамомview of the ECOELER PIR Motion Sensor Dimmer Switch highlighting its key features.

2. Хусусиятҳои маҳсулот

Назорати дасти озод: Automatically detects presence and ambient light to activate or deactivate lights.
Customization Settings: Selectable occupancy (Auto ON, Auto OFF) or vacancy (Manual ON, Auto OFF) sensor modes. Adjustable time delay (15 sec, 1min, 5min, 15min, 30min).
Digital Dimmer: MCU-based control for smooth, flicker-free dimming with wide compatibility for various LED types.
Мутобиқати универсалӣ: Works with dimmable LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
Single Pole Control: Designed for single-pole circuits only. Not suitable for 3-way circuits.
Насби осон: Fits standard junction boxes and requires a neutral wire.
Тарҳрезии устувор: Constructed with tough thermoplastic housing for impact and scratch resistance.

Diagram showing the adjustable settings on the ECOELER Motion Sensor Dimmer Switch, including dimmer level, time delay, sensitivity, ambient light, OCC/VAC mode, darkest brightness, and ON/OFF button.

Тасвир: Муфассал view of the product features and adjustable settings on the dimmer switch.

3. Маълумот оид ба бехатарӣ

WARNING: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring!

Ин дастгоҳ барои насб мувофиқи Кодекси миллии барқ ва қоидаҳои маҳаллӣ пешбинӣ шудааст.
Тавсия дода мешавад, ки ин насбро як электрики соҳибихтисос иҷро кунад.
Танҳо симҳои мисиро истифода баред.
A neutral wire is required for proper operation.
This switch is for single-pole applications only and is NOT suitable for 3-way circuits.

4. Мундариҷаи баста

ECOELER Motion Sensor Dimmer Switch
Плитаи девор
Дастурҳои насб (ин дастур)
Виддаҳои васлкунӣ
Сарпӯшҳои кабелӣ

Image showing the ECOELER Motion Sensor Dimmer Switch with its dimensions, included wall plate, screws, and wiring caps.

Image: Product dimensions and included accessories.

5. Мушаххасоти

Аттрибут	Арзиш
Рақами модел	YM2601-WH
Ҷилди амалиётӣtage	120 вольт (AC)
Рейтинги ҷорӣ	10 Amps
Макс Вотtage (LED/CFL-и танзимшаванда)	150 Вт
Макс Вотtage (Лағжанда/Галоген)	300 Вт
Навъи гузариш	Якқутба (яктарафа)
Навъи васлкунӣ	Монтажи девор
Материал	Copper, Metal, Polycarbonate
Андозаҳо (L x W x H)	6.86 х 4.2 х 11.48 см
Сертификатсияҳо	ETL, FCC

Image illustrating universal compatibility of the dimmer switch with incandescent, CFL, and dimmable LED lamps, showing their respective wattage рейтингҳо.

Image: Universal compatibility with various bulb types and their wattage рейтингҳо.

6. Насбкунӣ

Follow these steps carefully to install your ECOELER Motion Sensor Dimmer Switch. Ensure power is OFF before beginning.

6.1 Пеш аз насб

Хомӯш кардани барқ: Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltagсанҷанда
Калиди кӯҳнаро хориҷ кунед: Unscrew and carefully remove the existing wall plate and switch from the electrical box. Do not disconnect wires yet.
Муайян кардани симҳо: Identify the following wires in your electrical box:
- Сими гарм (хати): Қувваро аз автомати муҳофизатӣ интиқол медиҳад.
- Сими боркунӣ: Connects to the light fixture.
- Сими бетараф: (Required) Typically white, often capped together with other neutral wires.
- Сими заминӣ: (Recommended) Typically bare copper or green.

6.2 Дастурҳо оид ба васлкунӣ

Connect the wires from the ECOELER Motion Sensor Dimmer Switch to the corresponding wires in your electrical box using the provided wiring caps.

Пайваст кунед Сиёҳ wire from the switch to the Гарм (Хат) wire from the wall.
Пайваст кунед Сурх wire from the switch to the Бор кардан wire from the wall.
Пайваст кунед Сафед wire from the switch to the Бетараф wire from the wall.
Пайваст кунед Сабз wire from the switch to the Замин wire from the wall.

Wiring diagram for the ECOELER Motion Sensor Dimmer Switch, showing connections for Hot (Black), Load (Red), Neutral (White), and Ground (Green) wires in a single-pole circuit.

Image: Wiring guide for single-pole installation, showing connections for Hot, Load, Neutral, and Ground wires.

6.3 Mounting and Finishing

Carefully push all wired connections into the electrical box.
Mount the switch into the electrical box using the provided screws.
Лавҳаи деворро пайваст кунед.
Қувваи барқро дар автомати автоматӣ аз нав фаъол созед.

Video: Real installation and finished look of the ECOELER Motion Sensor Dimmer Switch.

7. Дастурҳои истифодабарӣ

The ECOELER Motion Sensor Dimmer Switch offers flexible operation modes and customizable settings.

7.1 Sensor Modes (Occupancy vs. Vacancy)

The switch can be configured for two primary sensor modes:

Occupancy Mode (Auto ON, Auto OFF): The lights automatically turn ON when motion is detected and automatically turn OFF after a set time delay when no motion is detected.
Vacancy Mode (Manual ON, Auto OFF): The lights must be manually turned ON, but will automatically turn OFF after a set time delay when no motion is detected.

Diagram illustrating the difference between Occupancy Mode (Auto ON, Auto OFF) and Vacancy Mode (Manual ON, Auto OFF) for the sensor switch.

Image: Comparison of Occupancy and Vacancy sensor modes.

Video: Explanation of motion sensor switch operating modes and ambient light level detection.

7.2 Танзимоти танзимот

The switch features adjustable dials for Time Delay, Sensitivity, and Ambient Light Level. These are typically located under a removable cover on the switch face.

Diagram of the programmable sensor switch showing dials for Time, Sense (Sensitivity), and Light (Ambient Light Level), along with Menu and Select buttons for mode selection.

Image: Programmable sensor switch with adjustable dials for time, sensitivity, and light level.

Таъхири вақт: Adjust how long the lights remain ON after the last detected motion. Options include 15 seconds (Test), 1 minute, 5 minutes, 15 minutes, and 30 minutes.
Ҳассосият: Adjust the motion detection range. Higher sensitivity detects motion over a larger area.
Ambient Light Level: In Occupancy mode, this setting determines the ambient light threshold below which the sensor will turn on the lights. For example, set to 'Dark' for lights to only turn on in low light conditions.

Image showing the adjustable time delay, sensitivity, and ambient light level settings on the motion sensor switch.

Image: Adjustable settings for time delay, sensitivity, and ambient light level.

7.3 Dimming Function

Use the dimmer button (typically a rocker switch or slider) to manually adjust the brightness of the connected lights. The digital control ensures smooth, flicker-free dimming.

Image demonstrating the digital dimming feature of the switch, showing different light levels in a study, dining room, and children's room.

Image: Digital dimming in action, illustrating various brightness levels.

8. Баррасии мушкилот

Чароғҳо фурӯзон намешаванд:
- Боварӣ ҳосил кунед, ки барқ дар автомати муҳофизатӣ фаъол аст.
- Verify all wiring connections are secure and correct (Hot, Load, Neutral, Ground).
- Check if the bulb is working and properly installed.
- Adjust the ambient light level setting; if set too high, lights may not turn on in bright conditions.
- Increase sensitivity if motion is not being detected.
Lights do not turn OFF:
- Ensure no continuous motion is occurring within the sensor's range.
- Check the time delay setting; a longer delay will keep lights on for longer.
- Reduce sensitivity if the sensor is detecting motion from outside the desired area.
Lights flicker or dim improperly:
- Ensure you are using dimmable LED/CFL or incandescent/halogen bulbs. Non-dimmable bulbs may flicker.
- Ваттҳои умумиро тасдиқ кунедtage of connected bulbs does not exceed the switch's maximum rating (150W for LED/CFL, 300W for Incandescent/Halogen).

9. Нигоҳдорӣ

To ensure optimal performance and longevity of your ECOELER Motion Sensor Dimmer Switch:

Тозакунӣ: Wipe the switch and wall plate with a soft, damp матоъ. Тозакунанда ё ҳалкунандаҳои абразивиро истифода набаред.
Аз монеаҳо канорагирӣ кунед: Ensure the sensor lens is not obstructed by furniture, curtains, or other objects that could block motion detection.
Санҷишҳои мунтазам: Periodically check the switch for any loose connections or visible damage. If any issues are found, turn off power at the breaker and consult a qualified electrician.

10. Кафолат ва дастгирӣ

The ECOELER Motion Sensor Dimmer Switch comes with a Кафолати 1 сол, providing peace of mind regarding its quality and durability. For technical support, warranty claims, or any questions regarding your product, please contact ECOELER customer service.

Истеҳсолкунанда: ECOELER ELECTRIC INC

Тамос: SUPPORTS@ECOELER.COM

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.