Leadfan 9-inch Wireless CarPlay & Android Auto Car Stereo

1. Муқаддима

Thank you for choosing the Leadfan 9-inch Wireless CarPlay & Android Auto Car Stereo. This manual provides detailed instructions for installation, setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience. Please read this manual thoroughly before installation and use, and keep it for future reference.

2. Маълумот оид ба бехатарӣ

• Always disconnect the vehicle's battery negative terminal before beginning any electrical installation to prevent short circuits and electrical damage.
• Ensure all wiring connections are secure and properly insulated to avoid electrical hazards.
• Дастгоҳро ба тарзе истифода набаред, ки диққати шуморо аз ронандагӣ парешон кунад. Ҳамеша ба бехатарии роҳ афзалият диҳед.
• Consult a professional if you are unsure about any installation steps or encounter difficulties.
• This product is designed for Nissan Altima models from 2013-2018. Verify compatibility with your vehicle before installation.

3. Мундариҷаи баста

Маҷмӯа ҷузъҳои зеринро дар бар мегирад:

• 9-inch IPS Touchscreen Android Radio Headunit
• Frame for Nissan Altima Teana 2013-2018
• Камераи эҳтиётии AHD
• Сими вуруди камераи баръакс
• Кабели RCA
• Сими USB (x2)
• Кабели барқ
• Антеннаи GPS
• CanBus Decoder
• Микрофони беруна
• Кронштейнҳои васлкунӣ
• Адаптери радио
• Дастури корбар

4. Танзим ва насб

This section guides you through the installation process. For a visual guide, please refer to the installation video below.

1. Disconnect Ground Cable: Open the hood and disconnect the negative terminal from the car battery. Use a 10mm socket or pliers if it's a wing nut.
2. Remove Instrument Side Finisher: Using a trim removal tool, gently pry away the instrument side finisher on the driver's side until it detaches.
3. Unseat Instrument Lower Panel: Use a trim removal tool to unseat the lower instrument panel on the driver's side.
4. Remove Center Stack Side Finishers: Carefully pry off the two side finishers located next to the factory radio using a trim removal tool.
5. Remove Front Air Control Screws: Locate and remove the two Phillips head screws securing the front air control panel.
6. Remove Front Air Control: Gently pull the front air control panel to detach it.
7. Disconnect Front Air Control Harness: Disconnect the single wiring harness from the back of the front air control panel.
8. Remove Cluster Lid (C) Screws: Remove the two Phillips head screws for the cluster lid (C).
9. Remove Cluster Lid (C): Gently pull the cluster lid (C) to detach it.
10. Disconnect Cluster Lid (C) Harness: Disconnect the two wiring harnesses from the back of the cluster lid (C). Needle nose pliers may be helpful.
11. Remove Audio Unit Screws: Remove the four Phillips head screws securing the factory audio unit.
12. Remove Audio Unit: Gently pull the factory audio unit out of the dashboard.
13. Disconnect Audio Unit Harness: Disconnect the four wiring harnesses from the back of the factory audio unit.
14. Install Brackets to Screen Frame: Attach the provided mounting brackets to the new head unit's screen frame using the included screws and screwdriver.
15. Connect RCA AUX IN: Connect the red and white RCA auxiliary input cables to the corresponding ports on the new head unit.
16. Connect CAN-BUS Module: Connect the CAN-BUS module to its designated white connector on the main wiring harness.
17. Connect Reverse Camera Input: Connect the yellow RCA cable for the reverse camera input.
18. Пайваст кардани антеннаи GPS: Screw in the GPS antenna to its port on the head unit.
19. Install Harness Connections: Connect the remaining seven harness connections (USB, main antenna, steering wheel controls, power) to their specific ports on the new head unit. These are keyed to fit only one way.
20. Connect Harness to Factory Plugs: Connect the new head unit's main wiring harness to the four factory plugs in the vehicle's dashboard.
21. Run USB Cables: If desired, feed the two USB cables through a small opening in the dashboard to a convenient location for access.
22. Attach GPS Antenna to Surface: Remove the adhesive liner from the GPS antenna and stick it to a clean, flat surface behind the radio for optimal signal reception.
23. Install New Car Stereo: Carefully slide the new head unit into the dashboard opening and push firmly until it snaps securely into place.
24. Reinstall Cluster Lid (C): Reconnect the wiring harnesses to the cluster lid (C) and snap it back into position.
25. Reinstall Front Air Control: Reconnect the wiring harness to the front air control panel and snap it back into place, ensuring it aligns correctly.
26. Install Cluster Lid/Air Control Screws: Reinstall the four Phillips head screws for the cluster lid and front air control.
27. Install Center Stack Side Finishers: Snap the two center stack side finishers back into place, starting from the top and working your way down.
28. Reseat Instrument Lower Panel: Push the instrument lower panel back into its original position until it snaps.
29. Install Instrument Side Finisher: Push the instrument side finisher back into its original position until it snaps.
30. Reconnect Ground Cable: Reconnect the negative terminal to the car battery and tighten it securely.
31. Setup CAM-BUS: After powering on the unit, navigate to Settings > Factory. Рамзро ворид кунед 3368 and confirm. Then go to Car Model > RZC > Nissan > All > All to configure the CAN-BUS settings.
32. Ҳама функсияҳоро санҷед: Verify that all functions, including steering wheel controls, phone, and voice commands, are working correctly.

5. Дастурҳои истифодабарӣ

Тавсифи тасвир: The car stereo screen displaying the Wireless CarPlay and Android Auto interfaces, showing various app icons like Phone, Music, Maps, Messages, and Spotify. A smartphone is shown wirelessly connected to the system.

Тавсифи тасвир: A visual representation of wireless connection for Apple CarPlay and Android Auto, showing a smartphone connecting to the car stereo via WiFi and Bluetooth.

• CarPlay бесим ва Android Auto: Connect your smartphone wirelessly via Bluetooth and Wi-Fi. Use the pre-installed 'Zlink' app to access phone features like navigation, calls, messages, and music directly on the car stereo screen. Supports voice control via Siri/Google Assistant.
• Пайванди оина: Project your phone screen onto the car stereo. iOS supports wireless connection, while Android supports both wireless and wired connections.
• Навигатсияи GPS: The unit comes with a built-in offline map application for North America. Connect to Wi-Fi or a hotspot to access online maps and other navigation apps from the Play Store (e.g., Maps, Sygic, Navitel IGO).
  

  Тавсифи тасвир: The car stereo screen displaying GPS navigation with map routes and a separate section showing various app icons available via 5G WiFi connection.

• Bluetooth 5.1: Enjoy hands-free calling and wireless music streaming. The unit includes a built-in clear microphone and an external mic jack for enhanced call quality.
• Радиои FM: Access stable FM radio with unlimited preset stations and support for manual and automatic station search.
• Назорати руль (SWC): The unit supports your original car's steering wheel control buttons, allowing you to easily switch songs, change channels, and adjust volume for safer driving.
  

  Тавсифи тасвир: The car stereo screen showing a 1280*720P AHD backup camera view, alongside an image demonstrating the use of steering wheel controls to manage radio functions.

• Камераи эҳтиётӣ: The included IP68 AHD rear camera provides a 1280*720P image with a 170-degree ultra-wide angle. The display automatically switches to the rear view ҳангоми бозгашт.
• Экрани тақсимшуда: Display two applications simultaneously on the screen for multitasking.
• Пайвастшавӣ Wi-Fi: Connect to wireless networks or use your phone's hotspot to download additional applications from the Google Play Store, such as YouTube, Spotify, or Pandora.
• Эффектҳои садоии эквалайзер: Adjust various EQ sound effects to customize your audio experience.

6. Нигоҳдорӣ

• Тоза кардани экран: Барои хушхӯю пок кардани экрани сенсорӣ матои мулоим ва ифлосро истифода баред. Барои доғҳои якрав, каме гampматоъро бо об ё тозакунандаи барои экран бехатар. Аз маводи кимиёвии сахт худдорӣ намоед.
• Тозакунии умумӣ: Keep the unit and surrounding dashboard area free of dust and debris. Use a soft brush or cloth for vents and crevices.
• Навсозии нармафзор: Periodically check for software updates from Leadfan to ensure optimal performance and access to new features.

7. Баррасии мушкилот

• CarPlay/Android Auto бесим кор намекунад: Try restarting your smartphone and the car stereo. Ensure Bluetooth and Wi-Fi are enabled on your phone and correctly paired with the unit. If using a wired connection for Android Auto, use the original USB cable.
• Овоз нест: Check all audio connections, including RCA cables. Verify the volume levels on both the car stereo and your connected device.
• Масъалаҳои сигнали GPS: Ensure the GPS antenna is securely attached and placed in a location with a clear view осмон, холӣ аз монеаҳо.
• Дастгоҳ фаъол нест: Check the battery connection and all power harnesses. Ensure the vehicle's ignition is on.
• Идоракунии руль ҷавоб намедиҳад: Verify the CAN-BUS settings are correctly configured as per the setup instructions (Settings > Factory > PW: 3368 > Car Model > RZC > Nissan > All > All).

8. Мушаххасоти

9. Кафолат ва дастгирӣ

• Тазмини сифат: This product comes with a 1-Year Quality Assurance.
• Шеваи Бозгардон: A 30-Day Return Policy is available for your convenience.
• Пуштибонии фаннӣ: Leadfan offers Lifetime After-Sales Consult and Technical Support.
• Хидмат ба муштари: For any technical or installation questions, please contact "Leedfan" via Amazon chat. We aim to reply within 16 hours.