Муқаддима
This manual provides detailed instructions for the installation, usage, and maintenance of the NARWAL Freo S Robot Vacuum Accessories Kit. This kit includes essential replacement parts to ensure your NARWAL Freo S robot vacuum cleaner maintains optimal performance.
Мундариҷаи баста
Please verify that all items are present in your accessory kit:
- 1 x Roller Brush
- 2 x Side Brushes (Left and Right)
- 2 x Филтрҳо
Image: Contents of the NARWAL Freo S Robot Vacuum Accessories Kit.
Дастурҳои насб
Ensure the robot vacuum is powered off and disconnected from its charging station before performing any installation or replacement procedures.
1. Replacing the Roller Brush
- Turn the robot vacuum upside down on a flat, stable surface.
- Locate the brush guard cover, usually secured by two tabs or screws. Press the tabs or unscrew to remove the cover.
- Lift out the old roller brush.
- Insert the new roller brush, ensuring the square end fits into the corresponding slot and the round end with the bearing clicks into place.
- Replace the brush guard cover and secure it.
Image: Underside of the robot vacuum, illustrating the roller brush area.
2. Replacing the Side Brushes
- Чангкашаки роботро чаппа гардонед.
- Locate the side brushes. They are typically held in place by a single screw.
- Use a screwdriver to remove the screw and detach the old side brush.
- Align the new side brush with the post and secure it with the screw. Ensure the correct brush (L for left, R for right) is installed if marked.
Image: Robot vacuum in operation, showing the side brushes.
3. Replacing the Filters
- Open the top cover of the robot vacuum to access the dustbin.
- Қуттии партовро аз робот хориҷ кунед.
- Open the dustbin cover to reveal the filter compartment.
- Филтри кӯҳнаро бо кашидани он хориҷ кунед.
- Филтри навро ба қисм ҷойгир кунед ва боварӣ ҳосил кунед, ки он дуруст ҷойгир аст.
- Сарпӯши қуттии партовро пӯшед, қуттии партовро ба робот дубора гузоред ва сарпӯши болоро пӯшед.
Image: Accessing the dustbin and filter compartment of the robot vacuum.
Usage Guidelines and Replacement Frequency
To maintain optimal cleaning performance and extend the lifespan of your NARWAL Freo S robot vacuum, it is recommended to replace accessories regularly.
- хасу ғалтаки: Replace every 6-12 months, or sooner if visible wear or damage occurs.
- Чӯткаҳои тарафӣ: Replace every 3-6 months, or sooner if bristles are bent, worn, or missing.
- Филтрҳо: Replace every 2-3 months, or more frequently if you have pets or experience high dust levels.
Actual replacement frequency may vary based on usage habits and environment.
Нигоҳдорӣ
Regular cleaning of your accessories will help prolong their effectiveness between replacements.
- хасу ғалтаки: Remove hair and debris tangled around the brush and its ends weekly. A cleaning tool (often included with the robot) can assist.
- Чӯткаҳои тарафӣ: Check for tangled hair or debris weekly and remove as needed.
- Филтрҳо: Tap the filter gently over a trash can to remove dust and debris weekly. Do not wash filters with water unless explicitly stated by the manufacturer, as this can damage them.
Мушкилкушо
If you encounter issues after replacing accessories, consider the following:
- Brush not spinning: Ensure the roller brush and side brushes are correctly installed and free from obstructions. Check if the brush guard cover is properly secured.
- Кам шудани қувваи сӯзишворӣ: A clogged filter is a common cause. Ensure the new filter is clean and properly seated.
- Садоҳои ғайриоддӣ: Check all brushes for tangled hair or foreign objects. Ensure all parts are securely in place.
- Robot error messages: Refer to your main NARWAL Freo S robot vacuum manual for specific error codes. Ensure genuine NARWAL accessories are used.
Мушаххасоти
| Компонент | Quantity in Kit | Материал |
|---|---|---|
| Браш ғалтаки | 1 | Plastic, Bristles |
| Чӯткаҳои тарафӣ | 2 | Plastic, Nylon Bristles |
| Филтрҳо | 2 | HEPA-type material, Plastic frame |
Номи модел: YJCC023
Бренд: НАРВАЛ
Андозаҳои маҳсулот: Approximately 2.54 x 2.54 x 2.54 cm (individual components vary)
Вазни ашё: 180 grams (total kit)
Кафолат ва дастгирӣ
NARWAL accessories are designed for durability and performance. For specific warranty information regarding this accessory kit, please refer to the warranty policy provided with your original NARWAL Freo S robot vacuum or visit the official NARWAL webсайт.
For technical support, troubleshooting assistance, or to purchase additional genuine NARWAL accessories, please contact NARWAL customer service or visit their official support channels. Using non-genuine parts may void your robot vacuum's warranty and affect its performance.
NARWAL Official Webсайт: www.narwal.com