SAMEBIKE 20LVXD30 Display User Manual

Муқаддима

This manual provides essential instructions for the proper installation, operation, and maintenance of your SAMEBIKE 20LVXD30 Display. Please read this manual thoroughly before using the display to ensure safe and efficient operation. Retain this manual for future reference.

Маълумот оид ба бехатарӣ

Always prioritize safety when operating your electric bicycle. The display is an integral part of your e-bike's control system. Adhere to the following safety guidelines:

• Истифодаи кулоҳ: Always wear a certified helmet when riding your electric bicycle.
• Read Bicycle Manual: This display manual complements your electric bicycle's main owner's manual. Always read and understand the complete bicycle manual for critical safety information before riding.
• Қоидаҳои маҳаллӣ: Be aware of and comply with all local traffic laws and regulations regarding electric bicycle use.
• Шароити экологӣ: Avoid exposing the display to extreme temperatures, heavy rain, or direct sunlight for prolonged periods.
• Насби касбӣ: If you are unsure about any installation or connection steps, consult a qualified bicycle technician.

Ташкил кардан

The SAMEBIKE 20LVXD30 Display is designed for straightforward installation on compatible electric bicycles.

1. Монтаж: Securely attach the display bracket to the center of your bicycle's handlebar. Ensure it is positioned for optimal visibility and accessibility while riding.
2. Пайвастшавии кабел: Carefully connect the display's cable to the corresponding port on your electric bicycle's wiring harness. Ensure the connection is firm and properly seated to prevent accidental disconnection or water ingress.
3. Идоракунии кабелӣ: Route the display cable neatly along the handlebar and frame, securing it with cable ties to prevent interference with steering or other components.
4. Фаъолсозии ибтидоӣ: After installation, power on your electric bicycle. The display should illuminate and show initial readings.

Идоракунии Дисплей

The 20LVXD30 Display provides real-time information and control over your electric bicycle's functions.

Намоиши барview

The main screen provides a clear overview of key riding data:

• Сатҳи батарея: Indicated by a battery icon and percentagд (масалан, 90%).
• Current Power Output: Shows the instantaneous power being used (e.g., 682 W).
• Суръати ҷорӣ: Displays your current riding speed (e.g., 25.5 km/h).
• Масофаи сафар: Shows the distance covered during the current ride (e.g., 20.5 km/h, likely indicating trip distance in km).
• Сатҳи PAS: Indicates the current Pedal Assist System level (e.g., 1). This controls the amount of motor assistance.
• Вақт: Displays the current time (e.g., 19:45).

Функсияҳои асосӣ

• Фаъол / Хомӯш: Typically, a long press on a designated button (not visible in image, but standard) will power the display on or off.
• Adjusting PAS Level: Use the '+' and '-' buttons (if present, common design) to cycle through the Pedal Assist System levels. Higher levels provide more motor assistance.
• Changing Display Modes: Short presses on a mode button (if present) may cycle through different information displays, such as Odometer, Max Speed, Average Speed, etc.

Танзимотҳо

Accessing the settings menu usually involves a specific button combination or a long press on a mode button. Within the settings, you may be able to:

• Сана ва вақтро таъин кунед.
• Change units (e.g., km/h to mph).
• Reset trip data.
• Равшании рӯшноиро танзим кунед.
• Configure wheel size (if not automatically detected by the e-bike system).

Refer to your electric bicycle's main manual for detailed instructions on accessing and adjusting specific display settings, as these can vary.

Нигоҳдорӣ

Proper maintenance ensures the longevity and optimal performance of your SAMEBIKE 20LVXD30 Display.

• Тозакунӣ: нармро истифода баред, гamp cloth to gently wipe the display screen and casing. Avoid abrasive cleaners, solvents, or direct water spray, which can damage the electronics.
• Муҳофизат: While the display is designed to be weather-resistant, avoid prolonged exposure to heavy rain or direct water submersion. Consider using a protective cover when parking outdoors for extended periods.
• Санҷиши кабелӣ: Periodically check all cables and connections for signs of wear, fraying, or loose connections. Ensure they are securely fastened.
• Пешгирӣ аз таъсир: Protect the display from physical impacts, which can cause internal damage or screen cracks.

Мушкилкушо

If you encounter issues with your 20LVXD30 Display, try the following troubleshooting steps:

• Дисплей фаъол намешавад:
  • Ensure the electric bicycle's main power is on.
  • Check all cable connections to the display and the main wiring harness for looseness.
  • Боварӣ ҳосил кунед, ки батареяи велосипеди электронӣ заряди кофӣ дорад.
• Нишондиҳандаҳои нодурусти суръат/масофа:
  • Check the speed sensor and magnet on your bicycle wheel for proper alignment and cleanliness.
  • Ensure the wheel size setting in the display's menu (if adjustable) matches your bicycle's wheel size.
• PAS Not Functioning:
  • Verify the PAS level is set above 0 on the display.
  • Check the pedal sensor for any obstructions or damage.
• Рамзҳои хатогӣ: If an error code appears on the display, consult your electric bicycle's main manual or contact SAMEBIKE customer support with the specific code for assistance.

Мушаххасоти

Кафолат ва дастгирӣ

The SAMEBIKE 20LVXD30 Display comes with a Кафолати 12-моҳа аз санаи харид, камбудиҳои истеҳсолиро фаро мегирад. Ин кафолат зарари дар натиҷаи истифодаи нодуруст, садамаҳо, тағйироти беиҷозат ё фарсудашавии муқаррарӣ ба вуҷуд омадаро фаро намегирад.

For technical support, warranty claims, or further assistance, please contact SAMEBIKE customer service through their official website or your point of purchase. Please have your product model and purchase information ready when contacting support.