Мундариҷа
пинҳон
Модули Шӯрои таҳияи HONGWEI MICROELECTRONICS ESP32 C3 Модули Mini Wifi BT Bluetooth
Мушаххасоти
- Маҳсулот: ESP32 Development Board
- Истеҳсолкунанда: Espressif
- Мутобиқати: Arduino IDE
- Webсайт: https://www.arduino.cc/en/Main/Software
Дастурҳои истифодаи маҳсулот
Download Software and Development Board
- Нармафзори Arduino IDE-ро аз расмии расмӣ зеркашӣ кунед webсайти дар боло овардашуда.
- Барои оғози раванди насб нармафзори Arduino IDE -ро кушоед.
Add ESP32 Development Environment
- Дар Arduino IDE, равед File -> Preferences (shortcut key ‘Ctrl+,’).
- Add the JSON address of the ESP32 development board in the board manager settings.
- Click ‘OK’ to confirm and return to the Arduino IDE homepage.
- In the Development Board Manager, search for ESP32 and install the development environment.
Start Downloading and Testing
- Интихоб кунед File -> Мисолample -> Blink to download a flashing light program for testing.
- Modify the code as needed, such as changing LED_PIN to the desired pin number.
- Select the corresponding port and development board model in Arduino IDE.
- If the Comport is not recognized, manually enter download mode following the provided methods.
- Click upload and wait for the download to complete. The blue indicator light on the module should flash normally.
Радди масъулият ва огоҳии ҳуқуқи муаллиф
Маълумот дар ин ҳуҷҷат, аз ҷумла URL суроғаҳо барои истинод, бояд бе огоҳии тағйир. Ҳуҷҷатҳо бидуни кафолати ҳама гуна навъҳо, аз ҷумла ҳама гуна кафолатҳои тиҷоратӣ, мувофиқат ба ҳадафи мушаххас ё вайрон накардани ҳуқуқ ва ҳама гуна кафолатҳои дар ҷои дигаре дар ҳама гуна пешниҳод, мушаххасот ё тавсиф зикршуда, “чун ҳаст” пешниҳод карда мешаванд.ampле. Дар ин ҳуҷҷат ҳеҷ гуна масъулият, аз ҷумла ҳама гуна масъулият барои вайрон кардани ҳама гуна ҳуқуқҳои патентӣ, ки аз истифодаи маълумоти ин ҳуҷҷат бармеояд, ба дӯш гирифта намешавад. Ҳуҷҷати мазкур ба тариқи радкунӣ ё ба тариқи дигар ҳеҷ гуна иҷозатномаи возеҳ ё дар назардошта барои истифодаи ҳама гуна ҳуқуқи моликияти зеҳнӣ намедиҳад.
The test data obtained in this article are all obtained by the Ebyte laboratory test, and the actual results may be slightly different. All trade names, trademarks and registered trademarks mentioned herein are the property of their respective owners and are hereby acknowledged. Ebyte Electronic Technology Co., Ltd.
Шарҳ
Due to product version upgrade or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide . Chengdu Ebyte Electronic Technology Co., Ltd. does its best to provide accurate information in this manual. However, Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual are completely error-free. All statements in this manual, information ,and advice do not create any express or implied warranties.
Барview
Шиносоии маҳсулот
ESP32-C3-MINI-1-TB and ESP32-C3-MINI-1U-TB are two entry-level development boards for developing and testing small-sized ESP32-C3-MINI-1 & ESP32-C3-MINI-1U modules. This group of development boards has complete Wi-Fi and Bluetooth low energy functions, and most of the pins of the modules on the board have been led out to the pin headers on both sides. Developers can easily connect various peripherals through jumpers according to actual needs. The device can also be used by plugging the development board into the breadboard.
Параметрҳо
Муқаддимаи ҷузъҳо
Components and interfaces
Шарҳ: For specific function instructions, please refer to the user manual of ESP32-C3-MINI-1.
Таърифи PIN
Тасвири мусбати зерин ESP32-C3-MINI-1-TB-ро ҳамчун собиқ нишон медиҳадampле:
Қайдҳо
- P: power supply; I: input; O: output; T: can be set to high impedance.
- GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During chip power-on and system reset, the strapping pin controls the chip function according to the binary voltage value of the pin. For the specific description and application of the strapping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual.
- The power supply mode is Micro-USB interface power supply (default), 5V and GND pin header power supply, 3 and V3 and GND pin header power supply.
Муқаддимаи функсия
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
Дастури сӯзондани барнома
- Пеш аз фурӯзондан, боварӣ ҳосил кунед, ки ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB солим аст.
- Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0 cable (Standard A to Micro-B, computer -Windows, Linux, or macOS. Please make sure to use Appropriate USB cables; some cables are for charging only, not for data transfer and programming.
- Connect the USB data cable, and burn the program from the computer software.
Таърихи ревизия
Саволҳои зуд-зуд додашаванда
How do I troubleshoot if the blue indicator light does not flash after uploading?
Check the connection between the development board and your computer, ensure the correct port and board are selected in Arduino IDE, and try re-uploading the program.
Can I use other development environments with this ESP32 board?
While these instructions are tailored for Arduino IDE, you may be able to adapt them for other environments that support ESP32 development.
Ҳуҷҷатҳо / Сарчашмаҳо
 |
Модули Шӯрои таҳияи HONGWEI MICROELECTRONICS ESP32 C3 Модули Mini Wifi BT Bluetooth [pdf] Дастури корбар Модулҳои Шӯрои таҳияи ESP32 C3 Мини Wifi BT Модули Bluetooth, ESP32 C3, Модулҳои Шӯрои рушд Мини Wifi BT Модули Bluetooth, Модулҳои Шӯрои Мини Wifi BT Модули Bluetooth, Wifi BT Модули Bluetooth, Модули BT Bluetooth, Модули Bluetooth |