1. Муқаддима
The ANTUSI A6 is a versatile bicycle accessory combining an anti-theft alarm, a powerful taillight, and a remote control for convenient operation. Designed to enhance cycling safety and provide security against theft, this device features a high-decibel speaker, multiple lighting modes, and a durable, waterproof construction. This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your A6 unit.
Figure 1: ANTUSI A6 Smart Rear Light and Remote Controller
2. Мундариҷаи баста
Лутфан бастаро бодиққат тафтиш кунед, то боварӣ ҳосил кунед, ки ҳама чизҳо мавҷуданд:
- 1 x A6 Lamp/Alarm Unit
- 1 x Идоракунии дурдаст
- 1 х Л.amp Bracket (for saddle rail mounting)
- 1 x Controller Bracket (for handlebar mounting)
- 1 x кабели пуркунандаи USB
- 1 x Маҷмӯаи винти васлкунӣ
- 2 x Installation Tools (Hex wrenches)
- 1 x Bandage (for controller mounting)
- 1 x Холдон
- 1 x Дастури дастурҳо
Figure 2: Contents of the ANTUSI A6 Package
3. Мушаххасоти
| Хусусият | Мушаххасоти |
|---|---|
| Модели | A6 |
| Вазни холис | 88г |
| Андозаи сабук | 90 x 45 x 20мм |
| Андозаи дурдаст | 55 x 48 x 15мм |
| Battery Capacity (Light) | 800mAh (3.7V) Polymer Lithium Battery |
| Батареяи дурдаст | Батареяи сілтӣ 12V/27A |
| Вақти пуркунии барқ | 2-3 соат |
| Вақти иҷро | 10-35 соат (вобаста ба режим) |
| Вақти интизорӣ | То 30+ рӯз |
| Овози ҳушдор | 105-110 дБ |
| Lamp Мончоқҳо | LED COB |
| Материалхо | АБС, компютер |
| Сатҳи обногузар | IPX6 |
| Масофаи дурдаст | Max. 50m (open distance, can pass through walls) |
| Ҷойгиркунии васлкунӣ | Seatpost (saddle rail) |
| Saddle Rail Compatibility | 50-70mm width |
| Ҳисси интеллектуалӣ | Бале |
| Сертификатсия | CE |
Figure 3: ANTUSI A6 Product Parameters
4. Танзим ва насб
4.1 Taillight Installation
The A6 taillight is designed for saddle rail mounting. Follow these steps:
- Remove the fixing bracket from the taillight unit.
- Fasten the bracket securely under the saddle rails of your bicycle using the provided screws and hex tool.
- Tighten the long screw with the hex tool to ensure the bracket is firm.
- Insert the taillight unit into the fixing bracket hex slot.
- Tighten the short screws with the tool to secure the taillight to the bracket.
- Verify that the installation is complete and the taillight is stable.
Тасвири 4: Қадамҳои насби чароғҳои қафо
4.2 Насби идоракунии дурдаст
The remote control can be mounted on your bicycle handlebars for easy access:
- Pass the cable tie through the remote control bracket.
- Mount the bracket onto your bicycle handlebars in a convenient position.
- Secure the remote control into the mounted bracket.
Warm Tip: Please remove the remote control when the bicycle is parked outdoors to prevent theft or damage.
Figure 5: Remote Control Installation Steps
5. Дастурҳои истифодабарӣ
5.1 Charging the Taillight
The A6 taillight features a USB direct charging design. Connect the provided USB cable to the taillight's charging port and a USB power source (e.g., computer, power bank, or USB wall adapter). A full charge takes approximately 2-3 hours. The device can last up to 15 days with normal use and over 30 days on standby.
Figure 6: USB Charging for the Taillight
5.2 Taillight Functions
The taillight offers multiple lighting modes controlled by the remote. The main unit also has a red button (A) for lighting control and a blue button (B) for alarm control.
| Амалиёт | Режим | Тавсифи |
|---|---|---|
| X 1 -ро пахш кунед | Burst flash | Дар як сония 3 маротиба медурахшад |
| X 2 -ро пахш кунед | Дурахши зуд | Дар як сония 2 маротиба медурахшад |
| X 3 -ро пахш кунед | Ҳамеша дурахшон | Constant illumination mode |
| X 4 -ро пахш кунед | Пӯшед | Чароғро хомӯш мекунад |
Figure 7: Taillight Smart Functions
5.3 Функсияҳои идоракунии дурдаст
The wireless remote control allows you to manage the alarm and light functions from a distance of up to 50 meters.
- Танзими ҳушдор: One press until "BEE" sounds 3 times and the light flashes 3 times. The alarm will then be set after 3 seconds.
- Бекор кардани ҳушдор: One press until "BEE" sounds and the light flashes once.
- Rear Light Switch: Short press to switch between the 3 lighting modes (burst flash, fast flash, constant) and off.
- Bell Button:
- Short press: Bell sounds 3 times and light flashes 3 times.
- Long press: Bell sounds 3 times, light flashes 3 times, lights up for 3 seconds, and bell sounds long once.
Figure 8: Remote Control Function Descriptions
5.4 Alarm Operation (Locked Mode)
In locked mode, the A6 alarm will activate immediately if vibration or knocking is detected. If vibration is detected again within 2-12 seconds, the alarm will sound continuously for 30 seconds.
- Танзими ҳушдор: Use the remote control as described above.
- Хомӯш кардани ҳушдор: Use the remote control as described above.
The main unit has a blue button (B) for alarm control. By default, there is no password. Short press the arm button to arm, and long press the button (3s) to disarm and set the password.
Figure 9: Alarm Locked Mode Operation
6. Нигоҳдорӣ
- Тозакунӣ: Wipe the taillight and remote control with a soft, damp матоъ. Моддаҳои кимиёвии сахт ё тозакунандаи абразивиро истифода набаред.
- Муқовимат ба об: The device is IPX6 waterproof, meaning it is protected against high-pressure water jets. However, avoid submerging it in water. Ensure the USB charging port cover is securely closed when not charging to maintain water resistance.
- Нигоҳубини батарея: To prolong battery life, charge the device regularly, even if not in frequent use. Avoid completely draining the battery for extended periods.
- Нигоҳдорӣ: Store the device in a cool, dry place when not in use. If storing for a long time, charge the battery to about 50% every few months.
- Батареяи идоракунии дурдаст: The remote control uses a 12V/27A alkaline battery. Replace it when the remote's range or responsiveness decreases.
Figure 10: IPX6 Waterproof Design
7. Баррасии мушкилот
- Дастгоҳ фаъол нест: Ensure the battery is charged. Connect to a USB power source and check if the charging indicator lights up.
- Идоракунии дурдаст ҷавоб намедиҳад: Check the remote control's battery. Ensure the remote is within the effective operating range (up to 50m). Re-pair the remote if necessary (refer to specific pairing instructions if available in the included manual, otherwise try holding a button for 5 seconds to initiate pairing mode).
- Огоҳӣ садо намедиҳад: Ensure the alarm is armed. Check if the device has sufficient battery. Verify that the alarm sound level is not obstructed.
- Taillight not changing modes: Ensure the remote control is functioning correctly. Try pressing the lighting control button on the main unit directly.
- Alarm sounds too frequently (false alarms): Ensure the device is mounted securely and not subject to excessive vibrations from loose parts on the bicycle.
8. Маслиҳатҳои корбар
- For optimal visibility, especially in low-light conditions, use the 'Always bright' or 'Fast flash' mode.
- Always arm the alarm when leaving your bicycle unattended, even for short periods.
- Regularly check the mounting brackets for tightness to prevent the unit from falling off during rides.
- Keep the remote control in a safe and easily accessible place while riding, but remove it when parking your bike outdoors.
- Consider the remote control's range when parking your bike; ensure you can arm/disarm it reliably.
9. Кафолат ва дастгирӣ
The ANTUSI A6 Anti-theft Bicycle Alarm Light is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty details, claims, or technical support, please refer to the warranty information provided with your purchase or contact the seller directly. Keep your proof of purchase for warranty service.
