1. Муқаддима
The DeepCool CK-11508 is a compact, low-profile air-cooled CPU radiator designed to efficiently dissipate heat from your processor. It is compatible with various Intel LGA sockets, including 1150, 1151, 1155, 1156, and 1200. This manual will guide you through the installation, operation, and maintenance of your new CPU cooler to ensure optimal performance and longevity.
Figure 1: DeepCool CK-11508 CPU Cooler Overview
2. Мушаххасоти
Барои хусусиятҳои муфассали маҳсулот ба ҷадвали зер нигаред:
Тасвири 2: Мушаххасоти муфассали маҳсулот
| Хусусият | Тафсилот |
|---|---|
| Рақами модел | DeepCool CK-11508 |
| Навъи хунуккунӣ | Pro пастfile Ҳаво хунуккунанда |
| Андозаҳо (L×W×H) | 95мм × 95мм × 69.5мм |
| Суръати мухлиси | 2200 ± 10% RPM |
| Равиши ҳаво | 40.9 CFM |
| Навъи подшипник | Подшипникҳои гидравликӣ |
| Ҷилди номиналӣtage | 12В DC |
| Limit Height | 70мм |
| Сатҳи тамос | Aluminum Bottom |
| Fan Blade Quantity | 7 |
| Интерфейси барқ | Пайвасткунаки мухлиси 3-пиндор |
| Сокетҳои CPU-и дастгиришаванда | Intel LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA1200 |
| TDP (Cooler Power Consumption) | 0W |
| Вазни баста | 0.26 кг |
| Андозаҳои бастаҳо | 24 см (Л) x 14 см (В) x 10 см (Н) |
3. Мундариҷаи баста
- DeepCool CK-11508 CPU Cooler (with integrated fan)
- Intel Base Mounting Kit (1 set)
- Silicone Grease (Thermal Paste) (1 unit)
4. Дастури насб
Please follow these steps carefully to install your DeepCool CK-11508 CPU Cooler:
- Модараро омода кунед: Ensure your motherboard is removed from the PC case or has sufficient space around the CPU socket. Identify the CPU socket (LGA 1150/1151/1155/1156/1200).
- Install CPU (if not already installed): Carefully place your Intel CPU into the motherboard socket, aligning the notches. Close the retention arm.
- Равғани термалиро истифода баред: If your CPU does not have pre-applied thermal paste, or if the cooler's contact surface does not have it, apply a small pea-sized amount of the provided silicone grease to the center of the CPU's integrated heat spreader (IHS). Do not spread it manually; the pressure from the cooler will distribute it evenly.
- Хунуккунандаро ҷойгир кунед: Carefully align the four mounting pins on the cooler's base with the four holes around the CPU socket on the motherboard. Ensure the fan cable is oriented towards the CPU_FAN header on your motherboard for easy connection.
- Хунуккунакро муҳофизат кунед: Press down firmly on each of the four push-pins until they click into place. You should hear a distinct click for each pin, indicating it is properly secured. Gently tug on the cooler to ensure it is firmly attached and does not wobble.
- Connect Fan Power: Locate the 3-pin fan connector cable from the cooler. Connect this cable to the 'CPU_FAN' header on your motherboard. Ensure the connector is fully seated.
Figure 3: Cooler with mounting pins visible
Figure 4: Cooler contact surface (apply thermal paste here if not pre-applied)
5. Дастурҳои истифодабарӣ
Once installed, the DeepCool CK-11508 CPU Cooler operates automatically. The fan speed is fixed at approximately 2200 RPM to provide consistent cooling performance for your CPU. Ensure your system's BIOS/UEFI settings are configured to monitor the CPU fan speed and temperature.
6. Нигоҳдорӣ
Regular maintenance helps ensure optimal cooling performance and extends the lifespan of your cooler:
- Тоза кардани чанг: Periodically (every 3-6 months, or more frequently in dusty environments) use compressed air to blow dust out of the heatsink fins and fan blades. Hold the fan blades gently to prevent over-spinning during cleaning.
- Пайвастҳоро тафтиш кунед: Ensure the fan power cable remains securely connected to the motherboard's CPU_FAN header.
- Хамираи гармидиҳӣ: If you notice a significant increase in CPU temperatures over time, consider reapplying thermal paste. This typically involves removing the cooler, cleaning off old thermal paste from both the CPU and cooler base, and applying new thermal paste.
7. Баррасии мушкилот
If you encounter issues with your CPU cooler, refer to the following troubleshooting tips:
- Мухлиси чарх намезанад:
- Check if the 3-pin fan cable is securely connected to the CPU_FAN header on the motherboard.
- Боварӣ ҳосил кунед, ки система фаъол аст.
- Inspect the fan for any obstructions (e.g., loose cables) preventing it from spinning.
- Ҳарорати баланди CPU:
- Verify that the cooler is properly seated and secured to the CPU, with all four push-pins locked.
- Confirm that thermal paste was applied correctly between the CPU and the cooler's base.
- Ҳама гуна ҷамъшавии чангро аз сутунҳои гармкунак ва вентиляторҳо тоза кунед.
- Дар дохили корпуси компютери шумо ҷараёни мувофиқи ҳаворо таъмин кунед.
- Садои ғайриоддӣ:
- Check for loose cables or other components touching the fan blades.
- Ensure the fan is securely mounted and not vibrating against the heatsink.
8. Маслиҳатҳои корбар
- Таҷҳизоти васлкунӣ дохил мешаванд: The DeepCool CK-11508 comes with all necessary mounting hardware for Intel LGA 115x/1200 sockets, including the Intel base and silicone grease, so you won't need to purchase these separately.
- Pro пастfile Тарҳрезӣ: Its compact 69.5mm height makes it suitable for smaller PC cases or systems with limited clearance.
9. Кафолат ва дастгирӣ
Барои маълумоти кафолат, дастгирии техникӣ ё дархостҳои хидматрасонӣ, лутфан бевосита бо фурӯшандаи худ ё истеҳсолкунанда тамос гиред. Барои даъвоҳои кафолат далели хариди худро нигоҳ доред.
