ThermoPro TP260B Wireless Indoor/Outdoor Temperature and Humidity Monitor

1. Муқаддима

Ташаккур ба шумо барои харидasing the ThermoPro TP260B Wireless Indoor/Outdoor Temperature and Humidity Monitor. This device is designed to provide accurate temperature and humidity readings for both indoor and outdoor environments, with an impressive wireless range. It helps you maintain optimal conditions in your home, baby room, greenhouse, or storage areas.

2. Мундариҷаи баста

Лутфан боварӣ ҳосил кунед, ки ҳама ашёҳо мавҷуданд ва дар ҳолати хубанд:

• 1 x Main Display Unit (Receiver)
• 1 x Wireless Remote Sensor
• 1 x Дастури дастурӣ

Note: AAA Batteries are NOT included in the package.

3. Хусусиятҳои асосӣ

• Ultra-Long Wireless Range: Monitors conditions up to 1000 feet (300 meters) away.
• Дақиқии баланд: Equipped with a Swiss-Made Sensirion sensor for precise measurements.
• Multi-Channel Monitoring: Supports connection with up to 3 wireless remote sensors simultaneously to monitor 4 different locations (1 indoor, 3 outdoor).
• Дисплейи LCDи рӯшноӣ: Easy-to-read screen with a backlight for clear viewдар шароити нури кам.
• 24-Hour High/Low Records: Tracks the maximum and minimum temperature and humidity readings over the past 24 hours.
• Тирҳои тренд: Indicates whether temperature and humidity are rising, falling, or remaining constant.
• Durable Outdoor Sensor: IPX5 waterproof and cold-resistant down to -4°F (-20°C).
• Ҷойгиркунии универсалӣ: Main unit features a built-in magnet, wall mount hole, and tabletop stand.

4. Мушаххасоти

5. Компонентҳо барview

Main Display Unit (Receiver)

• OUT Display: Shows outdoor temperature and humidity.
• IN Display: Ҳарорат ва намӣ дар дохили биноро нишон медиҳад.
• CH 1/2/3: Indicates the channel of the currently displayed outdoor sensor.
• МАКС/MIN: Displays the highest/lowest recorded values.
• Нишондиҳандаи камии батарея: Icon appears when batteries need replacement.
• Тирҳои тренд: Up, Down, or Level arrows indicate changes in temperature/humidity.
• Тугмаи ° F/° C: Toggles between Fahrenheit and Celsius.
• CH/SYNC Button: Cycles through outdoor sensor channels (CH1, CH2, CH3) or initiates synchronization.
• Light Touch Button: Activates the backlight for 15 seconds.
• Тугмаи MAX/MIN/CLEAR: Displays MAX/MIN records. Long press to clear records.

Сенсорҳои дурдасти бесим

• Сенсори ҳарорат/намӣ: Measures ambient conditions.
• Нишондиҳандаи интиқол: Ҳангоми интиқоли маълумот дурахшанда мешавад.
• Интихоби канал: Switch to select CH1, CH2, or CH3.
• Бахши батарея: Holds AAA batteries.

6. Танзим ва насб

6.1 Насби батарея

1. Воҳиди асосии намоиш: Open the battery compartment on the back. Insert 2 x AAA batteries (not included) according to the polarity markings (+/-). Close the compartment.
2. Сенсори дурдасти бесим: Open the battery compartment. Insert 2 x AAA batteries (not included) according to the polarity markings (+/-). Close the compartment.

6.2 Синхронизатсияи ибтидоӣ

The main display unit and the remote sensor should automatically synchronize upon battery installation. If they do not, or if you are adding additional sensors:

1. Place the remote sensor near the main display unit.
2. Press and hold the 'CH/SYNC' button on the main display unit for 3 seconds. The display will show '---' and begin searching for the sensor signal.
3. Select the desired channel (1, 2, or 3) on the back of the remote sensor.
4. The main unit should display the temperature and humidity readings from the sensor within a few minutes.

6.3 Ҷойгиркунӣ

Воҳиди асосии намоиш:

• Place the unit on a tabletop using the integrated stand.
• Mount it on a wall using the hanging hole.
• Attach it to a metallic surface using the built-in magnet.

Сенсори дурдасти бесим:

• Place the sensor in your desired outdoor location. Ensure it is within the 1000ft wireless range of the main unit.
• For best accuracy, avoid direct sunlight and precipitation. Although the sensor is IPX5 waterproof and cold-resistant, placing it under an overhang or in a shaded area can prolong its lifespan and improve reading consistency.
• Ensure the sensor is not placed near large metal objects or other electronic devices that could interfere with the wireless signal.

7. Дастурҳои истифодабарӣ

7.1 Фаъол кардан/хомӯш кардан

The device powers on automatically upon battery installation. There is no dedicated power button.

7.2 Гузариши воҳидҳои ҳарорат (°F/°C)

Press the '°F/°C' button on the front of the main display unit to switch between Fahrenheit and Celsius.

7.3 Viewing Multiple Sensors (CH/SYNC)

If you have multiple remote sensors (up to 3), press the 'CH/SYNC' button to cycle through the channels (CH1, CH2, CH3). The display will show the readings for the selected channel.

7.4 Фаъолияти равшании паси

Press the 'Light' touch button on the front of the main display unit to activate the backlight. The backlight will stay on for 15 seconds.

7.5 Checking and Clearing MAX/MIN Records

1. Press the 'MAX/MIN/CLEAR' button once to display the maximum temperature and humidity recorded in the past 24 hours.
2. Press the 'MAX/MIN/CLEAR' button again to display the minimum temperature and humidity recorded in the past 24 hours.
3. To clear the MAX/MIN records, press and hold the 'MAX/MIN/CLEAR' button for 3 seconds. The records will reset, and new MAX/MIN values will begin to be recorded.

7.6 Understanding Trend Arrows

• ↑ (Up Arrow): Indicates that the temperature or humidity is rising.
• ↓ (Down Arrow): Indicates that the temperature or humidity is falling.
• → (Level Arrow): Indicates that the temperature or humidity is stable.

8. Нигоҳдорӣ

• Тозакунӣ: Дастгоҳ ва сенсорро бо матои нарм тоза кунедamp матоъ. Тозакунанда ё ҳалкунандаҳои абразивиро истифода набаред.
• Иваз кардани батарея: Replace batteries in both the main unit and sensor when the low battery indicator appears on the display. Ensure correct polarity.
• Нигоҳдорӣ: Агар дастгоҳро муддати тӯлонӣ нигоҳ доред, барои пешгирӣ аз ихроҷи он батареяҳоро хориҷ кунед.
• Аз ҳолатҳои шадид канорагирӣ кунед: While the outdoor sensor is robust, avoid exposing the main unit to extreme temperatures, direct sunlight, or moisture.

9. Баррасии мушкилот

9.1 No Outdoor Reading or Flashing '---'

• Батареяҳоро тафтиш кунед: Ensure batteries are correctly installed in both the main unit and the remote sensor, and that they are not depleted.
• Аз нав ҳамоҳангсозӣ кунед: Bring the remote sensor closer to the main unit. Press and hold the 'CH/SYNC' button on the main unit for 3 seconds to re-establish connection.
• дахолат: Move the main unit or sensor away from potential sources of interference such as other electronic devices, large metal surfaces, or thick walls.
• Диапазон: Ensure the sensor is within the 1000ft wireless range. Obstacles like walls, trees, or electronic devices can reduce the effective range.

9.2 Хониши нодуруст

• Ҷойгиршавӣ: Ensure both the main unit and sensor are placed in locations that accurately represent the ambient conditions. Avoid direct sunlight, heat sources, or areas with poor air circulation.
• Калибрченкунӣ: This unit is factory calibrated and does not require user calibration. If you suspect significant inaccuracy, contact customer support.

9.3 Намоиш кор намекунад

• Батареяҳо: Replace the batteries in the main unit.
• Аз нав танзим кардан: Remove batteries from the main unit, wait a few minutes, then reinsert them.

10. Маслиҳатҳои корбар

• For optimal battery life and consistent readings, use high-quality alkaline batteries.
• When placing the outdoor sensor, consider an area that is shaded and protected from direct rain, even with its waterproof rating, to maximize longevity.
• If monitoring a baby's room, ensure the unit is placed away from cribs or play areas where it could be knocked over, and at a height that reflects the general room temperature.
• Regularly check the low battery indicator to ensure continuous monitoring.

11. Кафолат ва дастгирии муштариён

ThermoPro provides a warranty for this product against defects in materials and workmanship. For detailed warranty information, product registration, or technical support, please visit the official ThermoPro website or contact their customer service directly. Please have your model number (TP260B) and purchase date available when contacting support.