Дастури корбарии модули LoRa силсилаи EBYTE E22P SX1262

1. Муқаддима

The EBYTE E22P Series LoRa Modules are high-performance wireless communication modules based on the SEMTECH SX1262 RF transceiver chip. These modules are designed for long-distance transmission with low power consumption, offering enhanced efficiency, faster speeds, and a compact size. They feature built-in PA (Power Amplifier), LNA (Low Noise Amplifier), SWA (Switching Amplifier), and ESD protection, making them suitable for various industrial and IoT applications requiring stable and anti-interference communication.

2. Хусусиятҳои асосӣ

Чипсет: SEMTECH SX1262 RF transceiver module.
Бандҳои басомад: Available in 868MHz (E22P-868M30S) and 915MHz (E22P-915M30S) variants.
Иҷрои баланд: Utilizes new SX1262/SX1268 chips for full performance upgrade, offering higher efficiency, longer distance, faster speed, and smaller size.
Масофаи дури муошират: Capable of up to 12km transmission distance under clear and open conditions with optimal antenna configuration.
Stable and Anti-interference: Built-in RF front-end module, power ampбаландбардор, садои паст amplifier, surface acoustic wave filter, and ceramic filter improve out-of-band spurious suppression and anti-interference capabilities.
High Precision Oscillator: Adopts a 32MHz high-precision active temperature-compensated crystal oscillator (TCXO) to ensure accurate and stable frequency across a wide temperature range (-40°C to +85°C).
Баромади барқ: Up to 30dBm (approximately 1W) transmit power.
Интерфейс: SPI (Serial Peripheral Interface).
Муҳофизати ESD: Integrated ESD protection design.
Андозаи паймон: Dimensions of 38.5mm x 24mm, suitable for applications with high volume requirements.
Имконоти антенна: Supports IPEX and Stamp Holes for flexible antenna integration.

EBYTE E22P LoRa Module performance upgrade with SX1262 chip — Figure 1: Full performance upgrade with SX1262/SX1268 chips, highlighting benefits like low power consumption, long distance, higher efficiency, faster speed, and smaller size.

EBYTE E22P LoRa Module long-distance transmission and anti-interference — Figure 2: Long-distance transmission communication is stable and has strong anti-interference ability due to built-in RF front-end module, power amplifier, LNA, SAW filter, and ceramic filter.

EBYTE E22P LoRa Module 12km communication distance — Figure 3: Measured communication distance of 12km under clear and open conditions, with maximum power and 2.5 kbps air speed, using a 5 dBi suction cup antenna 2 meters high.

EBYTE E22P LoRa Module active temperature compensated crystal oscillator — Figure 4: Comparison showing the benefits of an active temperature compensated crystal oscillator for stable and accurate frequency, especially across temperature variations.

3. Вариантҳои маҳсулот

The E22P series offers modules optimized for different frequency bands:

E22P-868M30S: Operates in the 868MHz frequency band.
E22P-915M30S: Operates in the 915MHz frequency band.

Both variants share the same core features and dimensions, differing primarily in their operating frequency to comply with regional regulations and application requirements.

EBYTE E22P-868M30S and E22P-915M30S LoRa Module dimensions — Figure 5: Dimensions of the E22P-868M30S and E22P-915M30S modules, both measuring 38.5mm x 24mm.

EBYTE E22P-915M30S and E22P-868M30S LoRa Modules with SX1262 chip — Figure 6: E22P-915M30S and E22P-868M30S LoRa modules, highlighting the SEMTECH SX1262 RF transceiver module.

4. Мушаххасоти

4.1. General Parameters

Параметрҳои асосӣ	E22P-868M30S	E22P-915M30S
Банди басомади амалиётӣ	863.3-873.3 МГц	902-928 МГц
ФР Chip	SX1262
Басомади кристалл	32MHz (High-precision active temperature compensated crystal oscillator)
Интиқоли нерӯ	30dBm (Maximum power, about 1W)
Масофаи алоқа	12000m (Max, with 5dBi antenna, 2m height)
Интерфейси коммуникатсионӣ	SPI
Нархи ҳаво	0.018-300 кбит/с
Таҳвили ҷилдиtagд (V)	2.5-5.5V (DC 3.3-5.5V)
Emission Current (mA)	610	640
Receiving Sensitivity (dBm)	-150
Навъи антенна	IPEX/Стamp Сӯрохиҳо
Вазни маҳсулот (г)	4.9 ±0.1г
Encapsulation Interface	Патч
Ҷараёни хоб	3уА

EBYTE E22P LoRa Module Product Parameters Table — Figure 7: Detailed product parameters for E22P-868M30S and E22P-915M30S modules.

4.2. Таърифҳои Pin

Шумораи пай дар пай	Номи PIN	Навъи пин	Ҳадафи Pin
1	GND	-	Сими заминӣ, ки ба замини истинод ба нерӯ пайваст шудааст
2	GND	-	Сими заминӣ, ки ба замини истинод ба нерӯ пайваст шудааст
3	GND	-	Сими заминӣ, ки ба замини истинод ба нерӯ пайваст шудааст
4	GND	-	Сими заминӣ, ки ба замини истинод ба нерӯ пайваст шудааст
5	GND	-	Сими заминӣ, ки ба замини истинод ба нерӯ пайваст шудааст
6	EN	Вуруд	RF enable control pin, connected to external MCU IO, high level is valid
7	T/R CTRL	Вуруд/баромад	RF transmission and reception control pins, high level for transmission, low level for reception, connected to external microcontroller IO or DIO2
8	DIO2	Вуруд/баромад	Configurable general IO port
9	VCC	-	Power supply, range 3.3 ~ 5.5V (it is recommended to add external ceramic filter capacitor)
10	VCC	-	Power supply, range 3.3 ~ 5.5V (it is recommended to add external ceramic filter capacitor)
11	GND	-	Сими заминӣ, ки ба замини истинод ба нерӯ пайваст шудааст
12	GND	-	Сими заминӣ, ки ба замини истинод ба нерӯ пайваст шудааст
13	DIO1	Вуруд/баромад	Configurable general IO port
14	БАНД	Натиҷа	Used for status indication
15	NRST	Вуруд	Chip reset trigger input pin, low level is valid
16	МИСО	Натиҷа	PIN баромади маълумоти SPI
17	МОСКВА	Вуруд	PIN вуруди додаҳои SPI
18	SCK	Вуруд	PIN-и вуруди соати SPI
19	NSS	Вуруд	Чипи модули интихобкардаи PIN, ки барои оғози иртиботи SPI истифода мешавад
20	GND	-	Сими заминӣ, ки ба замини истинод ба нерӯ пайваст шудааст
21	МОРТ	-	Интерфейси антенна, стamp сӯрох (50Ω импеданси хос)
22	GND	-	Сими заминӣ, ки ба замини истинод ба нерӯ пайваст шудааст

EBYTE E22P LoRa Module Pin Definitions Diagram — Figure 8: Pin definitions and layout for the E22P-868M30S / E22P-915M30S modules.

4.3. RF Output Power Comparison

E22P-868M30S RF output power comparison chart — Figure 9: RF output power comparison curve for E22P-868M30S, showing real output (dBm) versus set power (dBm) across different frequencies (873MHz, 868MHz, 863MHz).

E22P-915M30S RF output power comparison chart — Figure 10: RF output power comparison curve for E22P-915M30S, showing real output (dBm) versus set power (dBm) across different frequencies (928MHz, 915MHz, 902MHz).

5. Танзимот

5.1. Интегратсияи модул

The E22P modules are designed for surface-mount (SMD) integration. Ensure proper soldering techniques are used to avoid damage. Connect the module to your microcontroller (MCU) using the SPI interface and relevant control pins as defined in Section 4.2.

Recommended circuit diagram for E22P LoRa Module to MCU connection — Figure 11: Recommended circuit diagram illustrating the connection between the E22P-xxxMxxS module and a microcontroller (MCU) via SPI and control pins.

5.2. Пайвастшавии антенна

The module supports both IPEX and stamp hole antenna interfaces. Choose an appropriate 50Ω antenna for your application and frequency band (868MHz or 915MHz). For optimal performance, ensure the antenna is positioned correctly and has a clear line of sight.

EBYTE E22P LoRa Module dual antenna option and high-quality components — Figure 12: The module offers dual antenna options for flexibility and uses high-quality components like Wurth wirewound inductors for better filtering.

5.3. Таъмини барқ

Provide a stable DC power supply within the range of 2.5V to 5.5V. It is highly recommended to add external ceramic filter capacitors to the VCC pins to ensure stable power delivery and minimize noise.

5.4. Offline Test Evaluation Kit (Optional)

For quick evaluation and testing, an Offline Test Evaluation Kit is available. This kit includes a pre-welded E22P module, glue stick antennas (868M/915M), 2*10PIN headers, and a Type-C adapter cable. It is recommended to order two pieces of the kit for easy sending and receiving tests.

EBYTE E22P LoRa Module Offline Test Evaluation Kit — Figure 13: The Offline Test Evaluation Kit features an OLED display, LED indicator, control buttons (OK, UP, DOWN, Back), and a Type-C interface for quick testing.

EBYTE E22P LoRa Module Offline Test Evaluation Kit Checklist — Figure 14: Checklist for the Offline Test Evaluation Kit, including the E22P Offline Test Board (with soldered module), glue stick antennas, 2*10PIN headers, and a Type-C adapter cable.

6. Дастурҳои истифодабарӣ

6.1. Basic Operation with Test Kit

If using the Offline Test Evaluation Kit:

Connect the Type-C adapter cable to the kit and a power source (e.g., power bank or computer).
The OLED display will show the current mode (e.g., Home, Setting, Tx Mode, Rx Mode, Version).
Use the 'OK', 'UP', and 'DOWN' buttons to navigate menus and configure parameters. The 'Back' button (Buzzer) can be used to return to previous menus.
The LED indicator provides visual feedback on module status.
For data transmission tests, configure one kit as a transmitter and another as a receiver.

6.2. Data Transfer Example

When performing data transfer tests with two evaluation kits:

Configure the number of times to send data on the transmitting module.
The receiving module can display real-time data such as channel, rate, power, total transmissions (Tx Total), current receptions (Current), lost packets (Lost), and packet loss rate (Lost Pkt %).

EBYTE E22P LoRa Module data transfer example with transmitter and receiver — Figure 15: Data transfer example showing two E22P test kits configured as a transmitter and receiver, displaying real-time communication parameters on their OLED screens.

6.3. Таҳияи нармафзор

The Offline Test Evaluation Kit includes an onboard master control STM32E103C8T6, which supports secondary development. Users can develop custom firmware to control the LoRa module and integrate it into their specific applications.

7. Нигоҳдорӣ

Муҳофизати ESD: Always handle the module with proper electrostatic discharge (ESD) precautions to prevent damage to sensitive components.
тозагӣ: Keep the module clean and free from dust, moisture, and corrosive substances.
Ҳарорат: Operate the module within its specified temperature range (-40°C to +85°C). Avoid extreme temperatures that can affect performance and longevity.
Зарари ҷисмонӣ: Avoid physical stress or impact to the module. Ensure proper mounting to prevent vibrations or accidental disconnections.

8. Баррасии мушкилот

Муошират нест:
- Check all power connections (VCC, GND) and ensure they are stable and within the specified voltagдиапазон.
- Verify SPI connections (MISO, MOSI, SCK, NSS) are correct and securely attached.
- Ensure the EN pin is high for RF operation.
- Check the T/R CTRL pin for correct transmission/reception mode.
- Confirm antenna is properly connected and matched to the module's frequency.
Poor Range/Signal:
- Ensure antennas are correctly installed and have a clear line of sight.
- Check for environmental interference (e.g., other wireless devices, metal obstructions).
- Verify transmit power settings are at the desired level.
- Ensure both modules are operating on the same frequency and with compatible LoRa parameters (e.g., spreading factor, bandwidth).
Модул ҷавоб намедиҳад:
- Check the NRST pin. A low level on this pin will reset the chip.
- Verify the power supply is stable and sufficient.
Масъалаҳои нармафзор:
- Double-check your SPI communication code and register configurations.
- Refer to the SX1262 datasheet and EBYTE's documentation for detailed register maps and programming guides.

9. Маслиҳатҳои корбар

Интихоби антенна: For maximum range, use a high-gain antenna (e.g., 5dBi) and position it as high as possible with minimal obstructions.
Power Filtering: Always include ceramic filter capacitors on the VCC lines close to the module to ensure clean power and prevent noise from affecting RF performance.
Эҳтиётҳои ESD: When handling the module, especially during installation or antenna connection, use an anti-static wrist strap and work on an ESD-safe surface.
Санҷиш: When setting up a new communication link, start with short distances and gradually increase the range while monitoring signal quality.
Firmware Development: Leverage the STM32E103C8T6 on the evaluation kit for custom firmware development to tailor the module's behavior to your specific application needs.

10. Кафолат ва дастгирӣ

For detailed warranty information, technical support, and additional resources, please refer to the official EBYTE website or contact their customer service. Firmware updates and further documentation may also be available on the manufacturer's product page.

Зеркашӣ кунед files: https://www.cdebyte.com/product_serch/E22P/1/

Видео 1: Маҳсулот тамом шудview of the EBYTE E22P LoRa Module, showcasing its physical appearance and key features.

	Модули бесими EBYTE E22P-xxxMxxS Мушаххасоти маҳсулот Ин ҳуҷҷат хусусиятҳои муфассали техникиро барои модулҳои бесими силсилаи EBYTE E22P-xxxMxxS LoRa пешниҳод мекунад. Он маҳсулотро фаро мегирадview, хусусиятҳо, параметрҳои RF ва барқӣ, тарҳрезии сахтафзор, таҳияи нармафзор, схемаҳои барнома, ҳалли мушкилот, дастурҳои кафшер, моделҳои марбут ва тавсияҳои антенна. Модулҳо аз чипи SX1262 истифода мебаранд ва аз бандҳои басомади 868/915MHz дастгирӣ мекунанд.
	E22P-xxxMBX-SC Series Evaluation Kit User Manual - EBYTE User manual for the EBYTE E22P-xxxMBX-SC Series Evaluation Kit, a next-generation package-compatible Sub-1G wireless module kit. This guide covers product overview, pin definitions, software introduction, function demonstration, and frequently asked questions.
	Дастури корбарии маҷмӯаи арзёбии силсилаи E22P-xxxXBX-SC Дастури корбар барои Маҷмӯаи арзёбии силсилаи EBYTE E22P-xxxXBX-SC, ки хусусиятҳои он, таърифҳои PIN, параметрҳо, танзимоти нармафзор, намоишҳои функсияҳо ва ҳалли мушкилотро барои таҳияи модули бесими Sub-1G муфассал шарҳ медиҳад.
	Дастури корбарии модули LoRa EBYTE E220-900MM22S Дастури мукаммали корбар барои модули EBYTE E220-900MM22S LoRa, ки хусусиятҳо, тарҳи сахтафзор, кори нармафзор, саволҳои зуд-зуд додашаванда, роҳнамоии истеҳсолӣ ва тавсияҳои антеннаро дар бар мегирад.
	Дастури корбарии E22-900T30S - Модули бесими EBYTE SX1262 Дастури корбар барои модули бесими EBYTE E22-900T30S, ки дорои технологияи SX1262 LoRa барои диапазонҳои 868M/915MHz мебошад. Мушаххасот, хусусиятҳо, барномаҳо, режимҳои корӣ, тарҳрезии сахтафзор ва ҳалли мушкилотро дар бар мегирад.
	Дастури корбарии модули бесими LoRa E22-900T22D Дастури мукаммали корбар барои модули бесими EBYTE E22-900T22D LoRa, ки бо тафсилоти мушаххасот, хусусиятҳо, барномаҳо, конфигуратсия ва тарҳрезии сахтафзор барои алоқаи 868MHz/915MHz тавсиф шудааст.

EBYTE E22P Series