Муқаддима
This manual provides detailed instructions for the installation, operation, and maintenance of your Holley Electric Fuel Pump, Model 12-801-1. Designed for performance and reliability, this pump is a key component in your vehicle's fuel system. Please read this manual thoroughly before installation and operation to ensure proper function and safety.
Маълумот оид ба бехатарӣ
Ҳамеша чораҳои бехатарии зеринро риоя кунед:
- Ensure the vehicle's battery is disconnected before beginning any installation or maintenance.
- Дар майдони хуб вентилятсияшуда кор кунед, то буғҳои сӯзишворӣ нафас накашед.
- Таҷҳизоти муҳофизати инфиродӣ, аз ҷумла айнак ва дастпӯшакҳои бехатариро пӯшед.
- Keep fire extinguishers readily available when working with fuel systems.
- Do not smoke or use open flames near fuel.
- Refer to your vehicle's service manual for specific fuel system procedures.
Қисмҳои маҳсулот
The Holley Electric Fuel Pump kit includes the following components:
Расми 1: Holley Electric Fuel Pump (Model 12-801-1) with included mounting bracket, bolts, and nuts. This image shows the complete kit as supplied.
Расми 2: Аз наздики view of the mounting bracket and hardware. The kit includes two bolts, two nuts, and two lock washers for secure installation.
Расми 3: Пеш view of the Holley Electric Fuel Pump, highlighting the red label and electrical connections. Note the inlet and outlet ports.
Расми 4: кунҷӣ view of the Holley Electric Fuel Pump, showing the machined exterior and the robust construction of the unit.
Насб ва насб
Proper installation is crucial for the performance and longevity of your fuel pump. Follow these steps carefully:
- Ҷойгоҳи насб: Select a mounting location as close to the fuel tank as possible, below the fuel level, to ensure a gravity feed to the pump. The pump should be mounted securely using the provided bracket and hardware. Ensure the pump is mounted vertically with the motor at the top to prevent vapor lock.
- Пайвастҳои хати сӯзишворӣ:
- Install a 100-micron fuel filter between the fuel tank and the pump inlet. This protects the pump from large debris.
- Install a 40-micron fuel filter between the pump outlet and the carburetor/fuel log. This protects the carburetor from fine particles.
- Use appropriate fuel-resistant hoses and clamps for all connections. Ensure all connections are tight to prevent leaks.
Расми 5: Typical fuel system diagram illustrating the recommended placement of the Holley In-Line Fuel Pump and associated fuel filters (100 micron before pump, 40 micron after pump).
- Ноқилҳои барқӣ:
- Connect the positive (+) terminal of the pump to a switched 12V power source, preferably through a relay triggered by the ignition.
- Connect the negative (-) terminal of the pump to a good chassis ground.
- Install an inline fuse (e.g., 10-amp) in the positive wire as close to the power source as possible to protect the circuit. The motor draws approximately 2 amps.
- Боварӣ ҳосил кунед, ки ҳама пайвастҳои барқӣ бехатар ва изолятсия карда шудаанд, то ки кӯтоҳро пешгирӣ кунанд.
- Тайёр кардани система: After installation, cycle the ignition key a few times (without starting the engine) to allow the pump to prime the fuel system and build pressure. Check for any leaks.
Амалиёт
The Holley Electric Fuel Pump is designed for continuous operation once the engine is running. It maintains a maximum pressure of 7 psi, suitable for carbureted applications.
Расми 6: Performance curve illustrating the relationship between fuel flow (GPH) and fuel pressure (PSI) for the Holley Electric Fuel Pump. Note the decrease in flow as pressure increases.
The pump's rotor/vane design ensures consistent fuel delivery. For optimal performance, ensure your fuel system is free of air pockets and restrictions.
Нигоҳдорӣ
Regular maintenance ensures the longevity and reliable operation of your fuel pump:
- Иваз кардани филтри сӯзишворӣ: Regularly inspect and replace both the 100-micron pre-pump filter and the 40-micron post-pump filter. Clogged filters can restrict fuel flow and put undue strain on the pump. Refer to your vehicle's maintenance schedule or replace every 12,000 miles (20,000 km) or annually, whichever comes first.
- Шланг ва Clamp Санҷиш: Periodically check all fuel hoses for cracks, hardening, or signs of leakage. Ensure all clampс маҳкам ва бехатар мебошанд.
- Electrical Connection Check: Verify that all electrical connections to the pump are clean, tight, and free of corrosion.
- Амнияти насб: Confirm that the pump remains securely mounted and that mounting hardware is tight.
Мушкилкушо
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Насос кор намекунад | No power to pump; Blown fuse; Faulty wiring; Pump motor failure. | Check electrical connections and fuse. Test for 12V at pump terminals. Inspect wiring for damage. If power is present and wiring is good, pump may need replacement. |
| Low fuel pressure/flow | Clogged fuel filters; Restricted fuel line; Air leak in suction line; Low voltage to pump; Worn pump. | Replace fuel filters. Inspect fuel lines for kinks or damage. Check all connections for air leaks. Verify proper voltage supply. If all else fails, pump may be worn. |
| Excessive noise from pump | Air in fuel line (vapor lock); Restricted inlet; Loose mounting; Worn pump. | Ensure pump is gravity fed and below fuel level. Check pre-pump filter for clogging. Tighten mounting hardware. If noise persists, pump may be failing. |
| Сӯзишворӣ мерезад | Шланги фуҷур clamps; Damaged fuel lines; Faulty fittings. | Ҳама шланг clamps. Replace any damaged fuel lines or fittings. |
Мушаххасоти
| Бренд | Холли |
| Рақами модел | 12-801-1 |
| Навъи | Насоси барқии сӯзишворӣ |
| Фишори максималӣ | 7 psi |
| Тирандозии ҷорӣ | 2 amps |
| Андозаи пайвастшавӣ | 0.38 инч |
| Андозаи пайвастшавӣ | 0.38 инч |
| Навъи мувофиқ | Мошини мушаххас |
| Намуди хидматрасонии нақлиёт | Мошин, Мошин |
| Материал | Металл |
| Вазни ашё | 1.45 килограмм |
| Анҷомдиҳии берунӣ | Механиконидашуда |
Кафолат ва дастгирӣ
Holley products are manufactured to high standards and are backed by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Holley webсайт.
For technical assistance, troubleshooting, or parts inquiries, please contact Holley customer support. Contact information can typically be found on the Holley webсайт ё бастабандии маҳсулот.
Манбаъҳои онлайн: www.holley.com
