Metra 70-9003 Radio Wiring Harness Instruction Manual

1. Муқаддима

This manual provides instructions for the Metra 70-9003 Radio Wiring Harness. This harness is designed to simplify the installation of an aftermarket radio into select Audi, BMW, and VW vehicles manufactured from 2002 onwards. It eliminates the need for cutting factory wiring, ensuring a clean and straightforward connection.

2. Мундариҷаи баста

• Metra 70-9003 Wire Harness
• Дастури дастурӣ

Image: The Metra 70-9003 Radio Wiring Harness as it appears in its retail packaging, showing the product label and part number.

3. Мушаххасоти

4. Дастурамал оид ба насб

4.1 Умуманview

The Metra 70-9003 harness is designed for direct plug-and-play integration with your vehicle's factory radio connectors. The color-coded wires on the aftermarket radio side simplify connections, eliminating the need for cutting the vehicle's original wiring.

4.2 Пеш аз оғоз кардан

• Ensure your vehicle is compatible with the Metra 70-9003 harness. Refer to the Metra Electronics Vehicle Fit Guide or contact Metra tech support for confirmation.
• Disconnect the vehicle's negative battery terminal to prevent electrical shorts during installation.
• Gather necessary tools, which may include wire strippers, crimpers, electrical tape, and a multimeter.

4.3 Пайвастҳои ноқилӣ

Match the color-coded wires of the Metra 70-9003 harness to the corresponding wires of your aftermarket radio's harness. Common wire functions are listed below:

• Зард: 12V Constant Power
• Сурх: 12V Accessory Power (Switched)
• Сиёҳ: Замин
• Кабуд: Антеннаи барқ ​​/ AmpФаъолсозии дурдасти лифт
• Норанҷӣ: Равшанӣ
• Симҳои баландгӯяк: (Green, Purple, Gray, White - solid for positive, striped for negative)

Secure all connections using crimp connectors or solder, and insulate them with electrical tape or heat shrink tubing to prevent short circuits.

Image: The Metra 70-9003 Radio Wiring Harness, displaying its vehicle-specific connector and the color-coded wires for aftermarket radio integration.

4.4 Пайвастшавӣ ба мошин

Plug the vehicle-specific connector of the Metra 70-9003 harness into the factory radio harness located in your dashboard. Then, connect the aftermarket radio's harness (which is now wired to the Metra harness) to the new radio unit.

4.5 Санҷиш ва аз нав васл кардан

• Терминали манфии батареяи мошинро дубора пайваст кунед.
• Turn on the vehicle and test the aftermarket radio's functions, including power, audio output (all speakers), balance, fade, and illumination.
• Агар ҳамаи функсияҳо дуруст кор кунанд, қисмҳои панели идоракуниро бодиққат аз нав васл кунед.

5. Дастурҳои истифодабарӣ

The Metra 70-9003 is a passive wiring harness that facilitates the electrical connection of an aftermarket radio. Its operation is entirely dependent on the functionality of the connected aftermarket radio. Refer to your aftermarket radio's instruction manual for specific operating procedures and features.

6. Нигоҳдорӣ

The Metra 70-9003 wiring harness requires no regular maintenance. To ensure continued performance, periodically check that all connections remain secure and are free from moisture, corrosion, or physical damage. Avoid pulling on the wires or connectors forcefully.

7. Баррасии мушкилот

7.1 No Power to Radio

• Check the vehicle's fuse box for blown fuses related to the radio or accessory power.
• Verify the 12V constant (Yellow) and 12V accessory (Red) wires are correctly connected and receiving power using a multimeter.
• Ensure the vehicle's battery is fully charged and properly connected.

7.2 Садо аз баландгӯякҳо нест

• Confirm all speaker wires (Green, Purple, Gray, White - solid for positive, striped for negative) are correctly matched and connected to the aftermarket radio.
• Check the aftermarket radio's settings for proper balance and fade.
• Агар берунӣ amplifier is used, ensure the remote turn-on wire (Blue) is connected and the ampлифт қувва қабул мекунад.

7.3 Radio Not Turning Off with Ignition

• Verify the 12V accessory (Red) wire is connected to a switched power source that turns off with the vehicle's ignition.

7.4 Масъалаҳои умумӣ

• Double-check all wiring connections for looseness or incorrect pairing.
• Consult the aftermarket radio's manual for specific troubleshooting steps.
• For further assistance, contact Metra tech support.

8. Кафолат ва дастгирӣ

8.1 Маълумот дар бораи кафолат

The Metra 70-9003 Radio Wiring Harness comes with a 1-year limited warranty. Please retain your proof of purchase for all warranty claims.

8.2 Дастгирии техникӣ

Metra provides technical support 7 days a week for installation assistance. For contact information, please refer to the product packaging or visit Metra's official webсайт.