Хати 420001

Дастури корбарии интиқолдиҳандаи клавиатураи бисёркодии хаттӣ 420001

Модели: 420001

Муқаддима

This manual provides instructions for the installation, operation, and maintenance of the Linear Multi-Code Keypad Transmitter, model 420001. This wireless keypad is designed for use with Multi-Code Receivers to control access to garage doors or gates.

Маҳсулот ба охир расидview

The Linear Multi-Code Keypad Transmitter 420001 is a 12-button alphanumeric keypad. It operates on a 300 MHz frequency and features 10 dip switches for programming. Its weatherproof casing ensures durability for outdoor use.

Linear Multi-Code Keypad Transmitter 420001

Тасвир: Пеш view of the Linear Multi-Code Keypad Transmitter 420001, showing the 12-button alphanumeric keypad and the "MULTI-CODE" branding at the top.

Насб ва насб

  1. Насби батарея

    The keypad requires one 9V alkaline battery (not included). To install:

    • Open the keypad casing.
    • Connect the 9V battery to the battery clip.
    • Place the battery securely within the compartment.
    • Close the keypad casing, ensuring it is sealed properly for weather resistance.
  2. Монтаж

    The keypad is designed for screw-in installation and mounts with two screws.

    • Choose a suitable location for mounting, ensuring it is within range of your Multi-Code Receiver.
    • Mark the positions for the two mounting screws.
    • Агар лозим бошад, сӯрохиҳои пилотӣ парма кунед.
    • Secure the keypad to the surface using appropriate screws.
  3. Барномасозии клавиатура

    This keypad uses 10 dip switches for programming. The code is entered directly through the keypad, eliminating the need to manually adjust physical dip switches on the unit itself.

    1. Locate the dip switch settings on your Multi-Code Receiver or existing remote. This will be a sequence of 10 switches, each set to ON, OFF, or MIDDLE (if applicable).
    2. On the 420001 keypad, enter the 10-digit code corresponding to your receiver's dip switch settings. Refer to the keypad's internal instructions for specific key presses to represent ON, OFF, or MIDDLE positions.
    3. Press the "ACCESS" button to save the code.
    4. Test the keypad to ensure it operates your garage door or gate opener.

    Шарҳ: Programming typically takes less than 2 minutes. Ensure the keypad is within operational range of the receiver during testing.

Дастурҳои амалиётӣ

To operate your garage door or gate using the Linear Multi-Code Keypad Transmitter:

  1. Enter your programmed 10-digit access code using the alphanumeric buttons.
  2. Press the "ACCESS" button.
  3. The LED indicator will illuminate, and your Multi-Code Receiver should activate, opening or closing your garage door or gate.

If the door or gate does not respond, verify your code and ensure the keypad is within effective range of the receiver.

Нигоҳдорӣ

  • Иваз кардани батарея: When the keypad's performance degrades or the LED indicator fails to light, replace the 9V battery. Follow the battery installation steps.
  • Тозакунӣ: Clean the keypad's exterior with a soft, damp матоъ. Аз тозакунандаҳои абразивӣ ё ҳалкунандаҳо худдорӣ кунед.
  • Муқовимати обу ҳаво: The keypad features a weatherproof casing. Ensure the casing is properly closed and sealed after any internal access (e.g., battery replacement) to maintain its weather-resistant properties.

Мушкилкушо

МушкилотСабаби эҳтимолӣҲалли
Keypad does not respond or works intermittently.
  • Батарея кам ё мурда.
  • Incorrect access code entered.
  • Keypad out of range of receiver.
  • Дахолат ё сигнали заиф.
  • Батареяи 9V -ро иваз кунед.
  • Re-enter the correct 10-digit access code.
  • Ensure keypad is within effective operating range (typically 15 feet from the unit).
  • If signal is weak, consider repositioning the keypad or checking the receiver's antenna.
Нишондиҳандаи LED фурӯзон намешавад.Батареяи мурда ё нодуруст насбшуда.Check battery connection or replace the 9V battery.
Keypad does not program correctly.Incorrect dip switch settings entered.Double-check the 10 dip switch settings from your receiver and re-enter the code carefully.

Мушаххасоти

Рақами модел420001
БрендХатӣ
Басомад300 МГц
Number of Dip Switches10
Манбаи нерӯ1 x 9V батареяи сілтӣ (дохил карда нашудааст)
Навъи насбВорид-дар
Андозаҳои маҳсулот6.75 x 1.5 x 3 инч
Вазни ашё4 унция
МатериалПластмасса
РангиБеж
МутобиқатFCC

Кафолат ва дастгирӣ

Барои гирифтани маълумот дар бораи кафолат ё дастгирии техникӣ, лутфан ба шахси расмии истеҳсолкунанда муроҷиат кунед webсайт ё шӯъбаи хидматрасонии муштариёни онҳо тамос гиред. Квитансияи хариди худро барои даъвоҳои кафолат нигоҳ доред.

Истеҳсолкунанда: Хатӣ

Ҳуҷҷатҳои марбут - 420001

Пешview Дастурҳои насб ва барномасозии клавиатураи бесими Linear NMTK MegaCode
Дастурҳои муфассал оид ба насб, барномарезӣ ва истифодаи клавиатураи бесими Linear NMTK MegaCode, аз ҷумла хусусиятҳо, иваз кардани батарея, васлкунии деворӣ ва маълумот дар бораи кафолат.
Пешview LINEAR DNT00094 NMTK клавиатураи бесими насб ва дастури барномасозӣ
Дастури ҳамаҷониба барои насб ва барномасозии клавиатураи бесими LINEAR DNT00094 NMTK барои операторони дари гараж ва дарвозаҳо, ки хусусиятҳо, амалиёт, иваз кардани батарея ва кафолатро дар бар мегирад.
Пешview Кушодакунандаи дари гаражи муҳаррики DC LDCO801 Linear: Дастурҳо ва дастури нигоҳдории соҳибони хона
Дастурҳои мукаммали соҳибони манзил барои кушодани дари гаражи муҳаррики DC Linear LDCO801. Маълумот дар бораи кор, насби идоракунии дурдаст, нигоҳдорӣ, санҷиши бехатарӣ, ҳалли мушкилот ва кафолатро дар бар мегирад.
Пешview Linear LDCO801 DC Motor Garage Door Opener Homeowner's Instructions
Comprehensive homeowner's instructions for the Linear LDCO801 DC Motor Garage Door Opener, covering installation, operation, safety, maintenance, and troubleshooting. Learn how to safely operate, maintain, and troubleshoot your garage door opener.
Пешview Интиқолдиҳандаҳои рақамии хаттии MCT-1/MCT-2 MegaCode: Дастурҳои истифода ва дастури барномасозӣ
Дастурҳои истифода барои интиқолдиҳандаҳои рақамии Linear MCT-1 ва MCT-2 MegaCode. Дар бораи хусусиятҳо, барномасозӣ, иваз кардани батарея, кафолат ва маълумоти муҳими FCC барои ин идоракунии дурдасти бесими гараж ва дарвоза маълумот гиред.
Пешview Системаҳои вуруди бесими хаттӣ: клавиатураҳо ва контроллерҳо
Доираи системаҳои вуруди бесими Linear-ро, аз ҷумла клавиатураҳои MDKP, контроллерҳои AP-5 ва клавиатураҳои гуногуни силсилаи AK барои назорати амни дастрасӣ дар барномаҳои истиқоматӣ, тиҷоратӣ ва саноатӣ, омӯзед.