Муқаддима
This manual provides essential instructions for the safe and effective use of your Eiko PR12 Miniature Light Bulb. Please read this manual thoroughly before installation and retain it for future reference. The Eiko PR12 is an incandescent light bulb designed for specific applications, including flashlights and automotive uses, requiring approximately 6 volts, typically supplied by 5 D-cell batteries.
Насб ва насб
Follow these steps to properly install the Eiko PR12 Miniature Light Bulb:
- Аввалин бехатарӣ: Ensure the device (e.g., flashlight) is turned off and disconnected from any power source, or that batteries are removed, before attempting to replace the bulb.
- Навъи лампаро муайян кунед: Confirm that your device requires a PR12 type miniature incandescent bulb with a flanged base and operates on approximately 6 volts (e.g., from 5 D-cell batteries).
- Лампаи кӯҳнаро хориҷ кунед: Carefully unscrew or unclip the old bulb from its socket. Dispose of old bulbs responsibly.
- Лампаи навро ворид кунед: Align the flanged base of the Eiko PR12 bulb with the socket. Gently push and twist or secure the bulb into place until it is firmly seated. Do not overtighten.
- Функсияи санҷиш: Reinsert batteries or reconnect the power source and turn on the device to verify the new bulb is functioning correctly.

This image displays the Eiko PR12 Miniature Light Bulb. It features a clear glass envelope, revealing the filament inside, and a silver-colored flanged base designed for secure fitting in compatible devices.
Дастурҳои амалиётӣ
The Eiko PR12 Miniature Light Bulb operates as a standard incandescent light source. Once properly installed in a compatible device and powered, it will emit light. Operation is typically controlled by the device's power switch.
- Фаъол / Хомӯш: Use the switch on your flashlight or other compatible device to turn the light bulb on or off.
- Равшанӣ: The bulb provides a fixed brightness of 38 lumens.
- Ҷилдиtage Мутобиқати: Ensure the power source provides approximately 6 volts for optimal performance and lifespan.
Нигоҳдорӣ
The Eiko PR12 Miniature Light Bulb requires minimal maintenance. However, following these guidelines can help ensure its longevity and performance:
- Тозакунӣ: If the glass bulb becomes dirty, gently wipe it with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or excessive moisture. Ensure the bulb is cool before cleaning.
- Муносибат: Always handle the bulb by its metal base to avoid transferring oils from your skin to the glass, which can create hot spots and reduce bulb life.
- Нигоҳдорӣ: Store spare bulbs in a cool, dry place, protected from physical impact.
- Иваз: The average lifetime of this bulb is 15 hours. Replace the bulb when it burns out or its light output significantly diminishes. Refer to the "Setup and Installation" section for replacement instructions.
Мушкилкушо
If your Eiko PR12 Miniature Light Bulb is not functioning as expected, consider the following common issues and solutions:
- Лампок фурӯзон намешавад:
- Санҷиши манбаи барқ: Ensure batteries are correctly inserted, fully charged, or the device is properly connected to its power supply.
- Ҷойгиршавии лампаҳоро тафтиш кунед: Verify the bulb is securely seated in its socket. Remove and reinsert if necessary.
- Филаментро тафтиш кунед: Visually inspect the bulb's filament. If it appears broken or disconnected, the bulb has likely burned out and needs replacement.
- Коркарди дастгоҳ: Test the device with a known working bulb, if available, to rule out a malfunction in the device itself (e.g., faulty switch, corroded contacts).
- Натиҷаи сабук:
- Қувваи ками батарея: Батареяҳоро иваз кунед ё пур кунед.
- Bulb Nearing End of Life: The bulb's brightness may decrease as it approaches its average lifetime of 15 hours. Consider replacing it.
- Dirty Bulb/Reflector: Clean the bulb and the device's reflector (if applicable) as described in the Maintenance section.
Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Бренд | Эйко |
| Номи модел / рақами қисм | PR12 / 40084 |
| Навъи нур | Чароғ |
| Ватtage | 2.98 Watts (Nominal 3.00 Watts) |
| Ҷилдиtage | 5.95 Volts (Nominal 6.00 Volts) |
| ҷорӣ | 0.501 Amps |
| Андозаи шакли лампа | B3.5 (Also referred to as B10) |
| Пойгоҳи лампа | Single Contact Miniature Flanged (PX13.5s) |
| Равшанӣ | 38 люмен |
| Давомнокии миёна | 15 соат |
| Материал | Мис (асос) |
| Хусусияти махсус | Clear Glass Bulb, Flashlight Bulb |
| Истифодаи мушаххас | Automotive, Lamp, Дурахш |
| Манбаи нерӯ | Battery Powered (e.g., 5 D-Cells) |
| UPC | 031293400840 |
Маълумот дар бораи кафолат
Specific warranty details for the Eiko PR12 Miniature Light Bulb are not provided in this manual. For information regarding product warranty, please refer to the original product packaging or contact Eiko customer support directly.
Дастгирии муштариён
For further assistance, technical support, or inquiries about the Eiko PR12 Miniature Light Bulb, please visit the official Eiko webсайт ё шӯъбаи хидматрасонии муштариёни онҳо тамос гиред. Маълумоти тамосро одатан дар истеҳсолкунанда пайдо кардан мумкин аст webсайт ё бастабандии маҳсулот.





