Муқаддима
This manual provides detailed instructions for the installation, operation, and maintenance of your Lanzar VCT2610 2-Channel 6000 Watt MOSFET Car Audio Amplifier. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to prevent damage to the unit or your vehicle's audio system. The Lanzar VCT2610 amplifier is designed to deliver high-quality audio performance for your car stereo system.
Маълумот оид ба бехатарӣ
- Насбкунии касбӣ тавсия дода мешавад: Installation of car audio components can be complex. If you are unsure about any part of the installation process, seek assistance from a qualified professional installer.
- Батареяро ҷудо кунед: Always disconnect the vehicle's negative battery terminal before starting any electrical work to prevent short circuits and electrical shock.
- Ноқилҳои дуруст: Ensure all wiring is correctly connected and insulated to prevent short circuits, overheating, and potential fire hazards. Use appropriate gauge wires for power and ground connections.
- Вентилятсия: Монтед ampлифт дар ҷойе, ки гардиши мувофиқи ҳаворо фароҳам меорад, то аз ҳад зиёд гармшавиро пешгирӣ кунад. Дар ҷойҳои пӯшида бидуни вентилятсия насб карданро пешгирӣ кунед.
- Муҳофизати сӯзишворӣ: Дар amplifier is equipped with internal fuses. Ensure external fuse protection is also used on the main power wire near the battery.
- Аз намӣ канорагирӣ кунед: фош накунед ampлифт ба намӣ ё об.
- Монтажи бехатар: Ба таври бехатар насб кунед amplifier to prevent it from becoming a projectile in the event of a sudden stop or accident.
Дар қуттӣ чӣ ҳаст
The Lanzar VCT2610 amplifier package includes the following items:
- 1 x Lanzar VCT2610 2-Channel Car Stereo Ampзиндатар
Image: The Lanzar VCT2610 amplifier shown with its packaging, highlighting its dimensions (21.97 inches length, 10.63 inches width) and confirming the inclusion of the 2-Channel Car Stereo Ampлифер.
Вижагиҳо
The Lanzar VCT2610 amplifier incorporates several features designed for optimal audio performance and reliability:
- Истеҳсоли нерӯи баланд: Delivers 3000W x 2 at 4 ohms or 6000W x 1 bridged at 2 ohms for robust audio.
- Full Range Crossovers: Features low/high pass variable crossover for precise audio tuning.
- Таъминоти барқи MOSFET: Utilizes Metal Oxide Semiconductor Field-Effect Transistors for efficient power delivery.
- Муҳофизати ноқилҳои кӯтоҳ: Equipped with 2x40 amp maxi type fuses to protect against thermal, overload, and short circuit conditions.
- Slim Size Design: Compact dimensions (10.63''W x 1.78''H x 21.97''L) for flexible installation.
- Silver-Plated RCA Ports: Ensures high conductivity and minimal signal loss.
- Fully Protected Circuitry: Integrated protection mechanisms for enhanced durability.
Насб ва насб
Careful installation is crucial for the performance and longevity of your amplifier. Follow these steps for proper setup.
Монтаж кардани Ampзиндатар
Choose a mounting location that provides adequate ventilation and is protected from moisture. The slim design of the VCT2610 allows for versatile placement. Ensure the amplifier is securely fastened to a solid surface using the provided mounting hardware.
Image: The Lanzar VCT2610 amplifier installed in a vehicle's trunk, illustrating its compact and sturdy design for easy integration.
Пайвастҳои ноқилӣ
Refer to the diagrams below for proper wiring of power, ground, remote, and audio signals.
Image: Rear panel of the Lanzar VCT2610 amplifier, detailing the power supply terminals (GND, REM, +12V), dual 60A power fuses, and speaker output connections.
Терминалҳои таъмини барқ
- GND (замин): Connect this terminal to a clean, unpainted metal surface of the vehicle chassis. Ensure a strong, low-resistance connection.
- REM (Даргиркунии дурдаст): Ин терминалро ба баромади дурдасти фурӯзонкунии дастгоҳи асосии худ пайваст кунед. Ин сим сигнал медиҳад amplifier to turn on and off with your car's audio system.
- +12V (Қувва): Connect this terminal directly to the positive terminal of your vehicle's battery. An inline fuse holder with an appropriate fuse (not included, but recommended in addition to the amplifier's internal fuses) should be installed within 18 inches of the battery.
Пайвастҳои баландгӯяк
Connect your speakers to the 'SPEAKER' terminals. Ensure correct polarity (+ to + and - to -) for optimal sound quality. The VCT2610 supports 2-channel stereo operation or can be bridged for mono output.
RCA Input and Line Output
Connect your head unit's RCA outputs to the 'INPUT' RCA jacks on the amplifier. The 'LINE OUT' RCA jacks provide an unamplified signal for connecting additional ampбардорандагон дар бисёрсоҳавӣampнасби лифт.
Image: Top panel of the Lanzar VCT2610 amplifier, displaying the Low Level Input, Aux Line Outputs, Input Level Control, Sub Sonic Filter Switch, Crossover Mode Selector, Crossover Control, and Power LED.
Дастурҳои амалиётӣ
Боре ба amplifier is correctly installed and wired, you can adjust its settings for optimal audio performance.
Назорат ва нишондиҳандаҳо
- Low Level Input (RCA): Connect your head unit's RCA pre-outs here.
- Aux Line Outputs (RCA): Provides a full-range signal for daisy-chaining to other ampосебдидагон.
- Input Level Control (GAIN): Ҳассосияти вурудро танзим мекунад ampлифт барои мувофиқат ба сатҳи баромади воҳиди сари шумо. Бо ҳадди ақали фоида оғоз кунед ва оҳиста-оҳиста зиёд кунед, то он даме, ки ҳаҷми дилхоҳ бе таҳриф ба даст ояд.
- Sub Sonic Filter Switch: Engages a filter to remove extremely low frequencies that are inaudible and can waste ampқувваи баранда.
- Crossover Mode Selector (HPF/FULL/LPF):
- HPF (филтри баландгузар): Allows frequencies above the set crossover point to pass through, typically used for full-range speakers.
- ПУРРА: Bypasses the crossover, allowing all frequencies to pass through.
- LPF (филтри пасти гузариш): Allows frequencies below the set crossover point to pass through, typically used for subwoofers.
- Crossover Control (FREQ): Adjusts the frequency point for the High Pass or Low Pass filter, depending on the Crossover Mode selected.
- Назорати баланд бардоштани басс: Increases the bass output at a specific frequency. Use sparingly to avoid distortion.
- LED барқ (сабз): Вақте ки ampЛифт фаъол аст ва ба таври муқаррарӣ кор мекунад.
- Protection LED (Red): равшан мекунад, агар amplifier enters protection mode due to overheating, short circuit, or other fault conditions.
Нигоҳдорӣ
To ensure the longevity and optimal performance of your Lanzar VCT2610 amplifier, ин дастурҳои оддии нигоҳубинро риоя кунед:
- Тоза нигоҳ доред: Мунтазам тоза кунед amplifier's exterior with a soft, dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
- Вентилятсияро таъмин кунед: Ба таври даврӣ тафтиш кунед, ки ampПарҳои хунуккунандаи лифтер аз монеаҳо холӣ мебошанд, то паҳншавии дурусти гармиро таъмин кунанд.
- Пайвастҳоро тафтиш кунед: Occasionally inspect all power, ground, remote, and speaker connections to ensure they are secure and free from corrosion. Loose connections can lead to poor performance or damage.
- Санҷиши сӯзишворӣ: Агар amplifier stops working, check the internal fuses (2x40A maxi type) and any external fuses. Replace blown fuses only with fuses of the same type and rating.
Мушкилкушо
Агар шумо бо мушкилоти худ дучор шавед ampБарои баланд бардоштани сатҳи огоҳӣ, пеш аз тамос бо дастгирӣ ба дастури ҳалли мушкилоти зерин муроҷиат кунед.
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Не барқ / барқ LED хомӯш |
|
|
| LED-и муҳофизатӣ фурӯзон аст |
|
|
| Не баромади садо |
|
|
| Овози таҳрифшуда |
|
|
Мушаххасоти
The following are the technical specifications for the Lanzar VCT2610 ampумр:
- Рақами модел: VCT2610
- Шумораи каналҳо: 2
- Қувваи баромад: 3000 Ватт RMS / 6000 Ватт MAX
- Ҳаҷми ҳадди ақали таъминотtage: 12 вольт
- Андозаҳои ашё (L x W x H): 25.7 x 12.6 x 3.59 инч
- Вазни ашё: 13.2 фунт
- Мавод: Металл
- Навъи васлкунӣ: Монтажи рӯизаминӣ
- UPC: 068888897013
- Истеҳсолкунанда: Садо дар атроф
- Мушаххасоти мувофиқ: FCC, IC
Кафолат ва дастгирӣ
The Lanzar VCT2610 ampлифофа бо а меояд Кафолати 1 сол from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by improper installation, accident, misuse, abuse, negligence, unauthorized modification, or normal wear and tear.
For technical support or warranty claims, please contact Lanzar customer service. Keep your proof of purchase for warranty validation.
