Sola Ranger RN 30 m/B Fiberglass Measuring Tape User Manual

Муқаддима

Thank you for choosing the Sola Ranger RN 30 m/B Fiberglass Measuring Tape. This robust and reliable measuring tool is designed for accurate measurements in various conditions. Its fiberglass construction ensures resistance to impact, breakage, moisture, cold, and many chemicals, making it suitable for demanding environments. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your measuring tape.

Дастурҳои бехатарӣ

• Always handle the measuring tape with care to prevent injury from the tape edge or retraction mechanism.
• Ensure the tape is fully retracted into its housing when not in use to prevent tripping hazards or damage.
• Do not use the tape near electrical sources or in situations where it could become entangled with moving machinery.
• Аз дастрасии кӯдакон дур нигоҳ доред.
• Inspect the tape for any signs of damage before each use. Do not use if the tape is frayed, cracked, or the housing is broken.

Ташкил кардан

The Sola Ranger RN 30 m/B measuring tape requires minimal setup. It is ready for use directly out of the packaging.

1. Кушодани: Carefully remove the measuring tape from its packaging.
2. Тафтиш: Before first use, visually inspect the tape and its housing for any manufacturing defects or shipping damage.
3. Шинос шудан: Locate the winding handle and the end hook of the tape.

Image 1: The Sola Ranger RN 30 m/B Fiberglass Measuring Tape. This image displays the tape measure with its yellow fiberglass tape partially extended from the durable housing. The winding handle is visible, indicating the mechanism for retraction.

Дастурҳои амалиётӣ

Follow these steps for accurate and efficient measurement:

1. Extend the Tape: Hold the housing firmly and pull the end hook of the tape to extend it to the desired length.
2. Position for Measurement: Place the end hook at the starting point of your measurement. Ensure the tape is straight and taut along the surface you are measuring.
3. Андозаро хонед: Read the measurement at the desired endpoint. The tape is marked in meters and centimeters.
4. Retract the Tape: Once the measurement is complete, turn the winding handle clockwise to retract the tape back into its housing. Ensure the tape retracts smoothly without kinks or twists.
5. Нигоҳдорӣ: Store the tape in a clean, dry place, fully retracted.

Нигоҳдорӣ

• Тозакунӣ: Wipe the tape and housing with a damp cloth after use, especially if it has been exposed to dirt, dust, or chemicals. Do not use abrasive cleaners.
• Хушк кардан: If the tape gets wet, extend it fully and allow it to air dry completely before retracting to prevent mildew or damage to the fiberglass.
• Нигоҳдорӣ: Store the measuring tape in a cool, dry place away from direct sunlight and extreme temperatures.
• Санҷиш: Regularly inspect the tape for wear, tears, or damage to the markings. Check the winding mechanism for smooth operation.

Мушкилкушо

Мушаххасоти

• Бренд: Сола
• Рақами модел: 50058801
• Истеҳсолкунанда: Cut360 UG
• Андозаҳои маҳсулот: 10 x 1.3 x 10 cm (460 g)
• Ранги: Зард
• Дурустии андозагирӣ: EC Accuracy Class II
• Маводҳои манзил: Алюминий
• GTIN: 09002719006725
• Tape Material: Нахи шиша
• Дарозии лента: 30 м

Кафолат ва дастгирӣ

For information regarding warranty coverage, technical support, or service, please contact the manufacturer, Cut360 UG, or your point of purchase. Please have your model number (50058801) and purchase date available when contacting support.

Note: Specific warranty terms may vary by region and retailer. Please refer to your purchase documentation for detailed warranty information.