DECA CB5000 Class Booster 5000E 12/24V Battery Charger and Starter User Manual

1. Муқаддима

This manual provides essential instructions for the safe and effective operation, setup, and maintenance of your DECA CB5000 Class Booster 5000E battery charger and starter. Please read this manual thoroughly before using the device to ensure proper function and prevent injury or damage.

2. Маълумот оид ба бехатарӣ

WARNING: Failure to follow these safety instructions may result in electric shock, fire, serious injury, or property damage.

• Always wear appropriate personal protective equipment, including eye protection and gloves, when working with batteries.
• Ensure the work area is well-ventilated to disperse explosive gases produced by batteries during charging.
• Never smoke or allow sparks or flames near the battery or charger.
• Connect and disconnect battery clamps only when the charger is switched off and unplugged from the mains power.
• Avoid touching uninsulated parts of the output connectors or battery terminals.
• Пуркунандаи барқро ба борон ва намии аз ҳад зиёд нагузоред.
• Keep children and unauthorized persons away from the charger and battery during operation.
• Агар сими барқ ​​осеб дида бошад, онро бояд истеҳсолкунанда, агенти хидматрасонии он ё шахсони соҳибихтисос ба ин монанд иваз кунанд, то аз хатар пешгирӣ карда шавад.

3. Маҳсулот ба охир расидview

The DECA CB5000 Class Booster 5000E is a robust, wheeled battery charger and starter designed for 12V and 24V lead-acid batteries. It features multiple charging positions and a powerful starting current for various vehicle types.

Расми 1: Пеш view of the DECA CB5000 Class Booster 5000E, showing its yellow casing, control panel, and wheels for portability.

Figure 2: Close-up of the control panel, displaying the analog ammeter, voltage selector (12V/24V), and charging current adjustment knobs.

4. Танзимот

1. Кушодани: Пуркунандаи барқро бодиққат аз бастабандӣ берун кунед. Ҳангоми интиқол ҳама гуна аломатҳои зарарро тафтиш кунед.
2. Маҷлис: Attach the wheels and handle (if not pre-assembled) according to the diagrams provided in the separate assembly guide. Ensure all fasteners are securely tightened.
3. Ҷойгиршавӣ: Position the charger on a stable, level surface in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
4. Пайвасти барқ: Ensure the charger's main switch is in the 'OFF' position. Connect the power cord to a grounded 230V AC 50-60Hz electrical outlet.

5. Дастурҳои истифодабарӣ

5.1. Пуркунии батарея

1. Батареяро тайёр кунед: Ensure the battery terminals are clean and free of corrosion. If the battery has removable caps, check the electrolyte level and top up with distilled water if necessary.
2. Ба батарея пайваст шавед: With the charger switched OFF and unplugged, connect the RED (+) positive clamp to the positive (+) battery terminal. Connect the BLACK (-) negative clamp to the negative (-) battery terminal. For batteries installed in a vehicle, connect the negative clamp ба шасси воситаи нақлиёт, дур аз хати батарея ва сӯзишворӣ.
3. Ҷилдро интихоб кунедtage: Ҳаҷмро таъин кунедtage selector switch on the charger to match the battery voltagд (12V ё 24V).
4. Select Charging Current: Adjust the charging current knob to the desired charging position (e.g., 'Min' for slow charge, 'Max' for fast charge, or an intermediate position). Refer to your battery's specifications for recommended charging rates.
5. Пуркунии барқро оғоз кунед: Plug the charger into the mains power outlet and switch the charger ON. The ammeter will indicate the charging current.
6. Монитор: Periodically check the ammeter. As the battery charges, the current will gradually decrease. Charging is complete when the ammeter reads near zero or stabilizes at a very low current.
7. Хомӯш кардан: Switch the charger OFF and unplug it from the mains. Then, disconnect the negative (-) clamp, followed by the positive (+) clamp.

5.2. Engine Starting (Booster Function)

CAUTION: Do not attempt to start an engine if the battery is frozen or severely damaged.

1. Мошинро тайёр кунед: Ensure the vehicle's ignition is OFF and all accessories are turned off.
2. Ба батарея пайваст шавед: With the charger switched OFF and unplugged, connect the RED (+) positive clamp to the positive (+) battery terminal. Connect the BLACK (-) negative clamp ба шасси воситаи нақлиёт, дур аз хати батарея ва сӯзишворӣ.
3. Ҷилдро интихоб кунедtage: Ҳаҷмро таъин кунедtage selector switch on the charger to match the vehicle's battery voltagд (12V ё 24V).
4. Select Starting Current: Set the charging current knob to the 'Max' or 'Booster' position.
5. Муҳаррикро оғоз кунед: Plug the charger into the mains power outlet and switch the charger ON. Wait approximately 60-120 seconds for the battery to receive a preliminary charge. Then, attempt to start the engine for no more than 5 seconds. If the engine does not start, wait at least 60 seconds before trying again. Do not exceed three starting attempts.
6. Хомӯш кардан: Once the engine starts, switch the charger OFF and unplug it from the mains. Then, disconnect the negative (-) clamp, followed by the positive (+) clamp.

6. Нигоҳдорӣ

• Тозакунӣ: Disconnect the charger from the mains before cleaning. Wipe the exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners.
• Санҷиши кабелӣ: Regularly inspect the power cord and battery cables for any signs of damage, cuts, or fraying. Replace damaged cables immediately through authorized service personnel.
• Нигоҳдорӣ: Store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure cables are neatly coiled and not kinked.

7. Баррасии мушкилот

If troubleshooting steps do not resolve the issue, please contact DECA customer support or an authorized service center.

8. Мушаххасоти

9. Кафолат ва дастгирӣ

For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, spare parts, or service inquiries, please contact DECA customer service or an authorized DECA service center. Keep your purchase receipt as proof of purchase.