KanexPro Adjustable Tilt Wall Mount Instruction Manual

Муқаддима

This manual provides comprehensive instructions for the safe and proper installation and operation of your KanexPro Adjustable Tilt Wall Mount. Please read this manual thoroughly before installation and retain it for future reference. This high-quality tilting wall mount bracket is designed for compatible televisions, offering a secure and adjustable viewтаҷрибаи ғанӣ.

Маълумот оид ба бехатарӣ

Огоҳӣ: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• Do not install this product on walls that are not structurally sound. Ensure the mounting surface can safely support the combined weight of the mount and the display.
• Always use a stud finder to locate wooden studs. If mounting to concrete, ensure appropriate anchors are used.
• Иқтидори максималии вазнро аз 165 фунт (75 кг) зиёд накунед.
• This mount is designed for indoor use only.
• Қисмҳои хурдро аз кӯдакон дур нигоҳ доред.
• Always have at least two people for installation to prevent injury or damage.

Мундариҷаи баста

Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact KanexPro customer support.

• Маҷмаи плитаҳои деворӣ
• Дастакҳои кронштейни телевизор (2)
• Маҷмӯаи сахтафзор васлкунӣ (винтҳои гуногун, шустушӯйҳо, лангарҳо)
• Дастурҳои насб (ин дастур)

Image: The main components of the KanexPro wall mount, showing the wall plate and two vertical TV bracket arms.

Насб ва насб

Воситаҳои зарурӣ (дохил карда намешаванд): Pencil, Drill, Phillips Head Screwdriver, Level, Stud Finder, Measuring Tape, Hammer (for concrete anchors).

Қадами 1: Қавсҳои телевизорро ба телевизор пайваст кунед

1. Барои пешгирӣ аз осеб дидани экран, телевизори худро бодиққат рӯи поён ба рӯи нарм ва тоза гузоред.
2. Дар пушти телевизори худ сӯрохиҳои васлкунии VESA-ро муайян кунед.
3. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's mounting holes.
4. Attach the two TV bracket arms to the back of your TV, ensuring they are vertically aligned and securely fastened. The hooks on the bracket arms should face downwards.

Қадами 2: Лавҳаи девориро ба девор васл кунед

1. Determine the desired height for your TV. Hold the wall plate against the wall and mark the top and bottom center points.
2. Use a stud finder to locate two adjacent wooden studs. Mark the center of each stud. The wall plate is designed to span two studs.
3. Position the wall plate against the wall, aligning the mounting holes with the marked stud centers. Use a level to ensure the wall plate is perfectly horizontal.
4. Mark the drill points through the holes on the wall plate.
5. Drill pilot holes at the marked locations. For wood studs, use a smaller drill bit than the lag bolts. For concrete, use a masonry drill bit and insert concrete anchors.
6. Secure the wall plate to the wall using the provided lag bolts and washers. Tighten firmly, but do not overtighten.

Image: Technical diagram illustrating the VESA compatibility ranges (min/max) for both horizontal and vertical dimensions, along with the overall measurements of the wall plate (32" wide x 8 7/8" high).

Қадами 3: Телевизорро ба девор овезон кунед

1. Бо ёрии он, телевизорро бо кронштейнҳои пайвастшуда бодиққат бардоред.
2. Align the hooks on the TV bracket arms with the top edge of the wall plate.
3. Gently lower the TV, ensuring the hooks engage securely with the wall plate.
4. Once the TV is hanging, locate the safety screws or locking mechanisms on the bottom of the TV bracket arms. Tighten these to secure the TV to the wall plate and prevent accidental dislodging.
5. Verify that the TV is level and securely mounted.

Тасвир: кунҷӣ view of the KanexPro wall mount, highlighting the robust construction and the tilting mechanism on the bracket arms.

Фаъолияти Хусусияти Тилт

This wall mount features a variable downward tilt from 0° to -15°.

1. To adjust the tilt, locate the tilt adjustment knobs or bolts on the side of each TV bracket arm.
2. Loosen these knobs/bolts slightly.
3. Carefully tilt the bottom of your TV forward or backward to achieve the desired viewкунҷи дохилӣ.
4. Once the desired angle is set, firmly tighten the tilt adjustment knobs/bolts to secure the TV in place.

Нигоҳдорӣ

Regular maintenance ensures the longevity and safe operation of your wall mount.

• Тозакунӣ: Монтажро бо матои мулоим ва хушк хушк кунед. Тозакунанда ё ҳалкунандаҳои абразивиро истифода набаред.
• Санҷиши даврӣ: Барои боварӣ ҳосил кардан, ки ҳамаи винтҳо ва болтҳо маҳкам ва мустаҳкаманд, онҳоро мунтазам тафтиш кунед. Дар ҳолати зарурӣ, онҳоро дубора маҳкам кунед.
• Зарар: If any part of the mount appears damaged or worn, do not use it. Contact KanexPro for replacement parts or professional assistance.

Мушкилкушо

Мушаххасоти

• Рақами модел: K-WALLM-14-BLK-0847
• Навъи васлкунӣ: Монтажи девор
• Навъи ҳаракат: Майл кардан
• Мавод: Пӯлоди хӯлаи
• Ранги: Black scratch resistant finish
• Иқтидори максималии вазн: 165 фунт (75 кг)
• Хусусияти майл: 0° to -15° Degrees (Variable Downward Tilt)
• Андозаи ҳадди аксари мувофиқи телевизион: 51 инч
• Дастгоҳҳои мувофиқ: Телевизион
• Вазни ашё: 13 фунт (тақрибан 5.9 кг)

Кафолат ва дастгирӣ

For warranty information and customer support, please refer to the KanexPro official website or contact their customer service department directly. Please have your model number (K-WALLM-14-BLK-0847) and purchase details ready when contacting support.

Истеҳсолкунанда: KanexPro