1. Муқаддима
This manual provides essential information for the proper installation, maintenance, and care of your Einhell 3405930 Shredder Accessory. This accessory is a replacement blade specifically designed for use with Einhell GH-KS 2440 shredders. Please read this manual thoroughly before attempting any installation or maintenance procedures to ensure safe and effective use.
2. Дастурамал оид ба бехатарӣ
Always observe the following safety precautions when handling the shredder accessory:
- Хомӯш кардани барқ: Before installing, removing, or inspecting the shredder blades, always ensure the main shredder unit is disconnected from its power source to prevent accidental startup.
- Либосҳои муҳофизатӣ пӯшед: Always wear heavy-duty gloves and eye protection when handling the blades. Blades are extremely sharp and can cause severe injury.
- Бо эҳтиёт муносибат кунед: Handle blades by their dull edges or mounting points whenever possible. Avoid touching the sharpened edges.
- Насби бехатар: Ensure all fasteners are tightened securely according to the shredder's main manual after blade replacement. Loose blades can be hazardous.
- Аз кӯдакон дур нигоҳ доред: Store replacement blades and the shredder unit out of reach of children.
3. Насбкунӣ (Иваз кардани майса)
The Einhell 3405930 is a replacement blade for the Einhell GH-KS 2440 shredder. Follow these steps to replace the blades:
- Prepare the Shredder: Ensure the Einhell GH-KS 2440 shredder is turned off and completely disconnected from the power supply. Allow any moving parts to come to a complete stop.
- Дастрасӣ ба қисмати Blade: Refer to your main GH-KS 2440 shredder manual for specific instructions on how to safely open and access the blade compartment. This usually involves removing covers or opening latches.
- Баргҳои кӯҳнаро хориҷ кунед: Carefully unfasten and remove the worn or damaged blades. Note their orientation for correct installation of the new blades. Dispose of old blades responsibly.
- Лавҳаҳои навро насб кунед: Position the new Einhell 3405930 blades in the correct orientation, matching the original setup. Secure them using the appropriate fasteners. Ensure they are seated correctly and can rotate freely if applicable.
- Қитъаро муҳофизат кунед: Close and secure the blade compartment covers or latches according to your shredder's manual.
- Санҷиш: Reconnect the shredder to power and perform a brief test run with no material to ensure proper function and no unusual noises.
Image: Two Einhell 3405930 replacement shredder blades. These blades are made of durable alloy steel and feature two circular mounting holes for secure attachment to the shredder mechanism. They are designed for efficient material reduction.
4. Амалиёт
Once the new Einhell 3405930 blades are correctly installed, the shredder will be ready for operation. The blades are the primary cutting component responsible for reducing garden waste. Always operate the shredder according to the instructions provided in your main Einhell GH-KS 2440 shredder manual. Ensure that only appropriate materials are fed into the shredder to prevent damage to the blades and the machine.
5. Нигоҳдорӣ
Proper maintenance extends the life of your shredder blades and ensures optimal performance:
- Санҷиши мунтазам: Periodically inspect the blades for signs of wear, dullness, or damage. Replace blades when they become dull or chipped to maintain shredding efficiency and prevent strain on the motor.
- Тозакунӣ: After each use, and with the power disconnected, carefully clean any debris, sap, or residue from the blades and the blade compartment. A stiff brush or compressed air can be used.
- Нигоҳдорӣ: Store replacement blades in a dry, safe place, away from moisture and corrosive materials. Keep them in their original packaging or a protective container to prevent accidental injury and maintain their sharpness.
- Молидани: If recommended by the main shredder manual, apply a light coat of machine oil to the blades to prevent rust, especially during long periods of storage.
6. Баррасии мушкилот
If you experience issues related to shredding performance after installing new blades, consider the following:
- Poor Shredding Performance: If the shredder is not cutting effectively, the blades may be dull or incorrectly installed. Inspect the blades for sharpness and ensure they are oriented correctly and securely fastened.
- Садо/ларзиши ғайриоддӣ: This could indicate loose blades or improper installation. Immediately disconnect power and re-check all blade fasteners and seating.
- Blade Damage: If blades are chipped or bent, they must be replaced immediately to prevent further damage to the shredder or potential injury.
For issues not related to the blades, refer to the main Einhell GH-KS 2440 shredder manual.
7. Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Рақами модел | 3405930 |
| Истеҳсолкунанда | Эйнҳелл |
| Вазни ашё | 2.11 унция |
| Андозаҳои маҳсулот | 2.76 x 1.18 x 1.18 инч |
| Материал | Пӯлоди хӯлаи |
| Power Source (Accessory) | Дастур |
| Компонентҳои дохилшуда | 1 x Shredder Accessory (set of blades) |
| Истифодаи тавсияшаванда | Maintenance and replacement of GH-KS 2440 shredder blades |
8. Кафолат
This shredder accessory is subject to the standard warranty terms provided by Einhell for their replacement parts. Please refer to the warranty information included with your original Einhell GH-KS 2440 shredder or visit the official Einhell website for detailed warranty policies and registration information. Keep your proof of purchase for any warranty claims.
9. Дастгирии муштариён
For technical assistance, spare parts, or further information regarding your Einhell 3405930 Shredder Accessory or the Einhell GH-KS 2440 shredder, please contact Einhell customer support. Contact details can typically be found on the official Einhell website or in the documentation provided with your original product purchase.
Einhell Official Webсайт: www.einhell.com
