Prime TNOREM02

Prime TNOREM02 Outdoor Remote Control with 2 Outlets and Wireless Transmitter User Manual

Model: TNOREM02

Муқаддима

The Prime TNOREM02 is an outdoor remote control system designed to provide convenient wireless operation for two grounded electrical devices. It includes a receiver unit with two 3-prong grounded outlets and a wireless transmitter (remote control) for switching connected devices on and off from a distance. This manual provides essential information for the safe and effective use of your Prime TNOREM02.

Prime TNOREM02 Outdoor Remote Control with Receiver and Transmitter

Image: The Prime TNOREM02 outdoor remote control system, showing the receiver unit with its power cord and the compact wireless transmitter.

Маълумот оид ба бехатарӣ

Лутфан пеш аз истифодаи ин маҳсулот ҳама дастурҳои бехатариро хонед ва бифаҳмед. Риоя накардани ин дастурҳо метавонад боиси зарбаи барқ, сӯхтор ё ҷароҳати вазнин гардад.

Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳама ашё дар баста мавҷуд аст:

Prime TNOREM02 Product Packaging

Image: The Prime TNOREM02 product packaging, showing the receiver and remote control clearly visible through the clear plastic.

Хусусиятҳои маҳсулот

Close-up of Prime TNOREM02 Receiver Outlets

Тасвир: Нақшаи наздик view of the Prime TNOREM02 receiver unit, highlighting the two 3-prong grounded outlets.

Ташкил кардан

  1. Ҷойгирро интихоб кунед: Choose a suitable outdoor location for the receiver unit. Ensure it is protected from direct heavy rain and positioned where its outlets face downwards.
  2. Қабулкунакро пайваст кунед: Connect the receiver unit's grounded plug into a standard 3-prong outdoor electrical outlet.
  3. Пайваст кардани дастгоҳҳо: Plug the devices you wish to control into the two grounded outlets on the receiver unit. Ensure the total wattage of connected devices does not exceed 1875 Watts.
  4. Prepare Transmitter: The CR2032 3V button-cell battery is pre-installed in the wireless transmitter. If the remote does not respond, check the battery.
Prime TNOREM02 Outdoor Remote Control in Use

Image: The Prime TNOREM02 receiver unit installed outdoors, connected to two green extension cords, with a hand holding the remote control to operate connected lights.

Дастурҳои амалиётӣ

Using the Prime TNOREM02 is straightforward:

Нигоҳдорӣ

The Prime TNOREM02 requires minimal maintenance. The primary maintenance task is replacing the battery in the wireless transmitter.

Replacing the Transmitter Battery:

  1. Locate the battery compartment on the back of the wireless transmitter.
  2. Using a small screwdriver or coin, carefully open the battery compartment cover.
  3. Remove the old CR2032 3V button-cell battery.
  4. Insert a new CR2032 3V button-cell battery with the positive (+) side facing up.
  5. Сарпӯши қисмати батареяро бехатар иваз кунед.
  6. Test the remote control to ensure it is functioning correctly.

Periodically inspect the receiver unit and its cords for any signs of damage, wear, or corrosion. Discontinue use if any damage is observed.

Мушкилкушо

МушкилотСабаби эҳтимолӣҲалли
Devices do not turn ON/OFF.
  • Transmitter battery is dead or incorrectly installed.
  • Receiver is not plugged in or not receiving power.
  • Devices plugged into receiver are not switched ON or are faulty.
  • Receiver is out of range of the transmitter.
  • Overload protection triggered.
  • Replace the CR2032 battery in the transmitter, ensuring correct polarity.
  • Verify the receiver is securely plugged into a working outdoor outlet.
  • Ensure connected devices are in the ON position (if applicable) and functional.
  • Move closer to the receiver unit. Reduce obstructions between the transmitter and receiver.
  • Unplug devices, wait a few minutes, then plug them back in. Reduce the total load.
Маҳдудияти масофаҳои бесим.
  • Монеаҳо байни интиқолдиҳанда ва қабулкунанда.
  • Weak transmitter battery.
  • Дахолати дигар дастгоҳҳои бесим.
  • Барои кам кардани монеаҳо, қабулкунанда ё интиқолдиҳандаро ба ҷои дигар ҷойгир кунед.
  • Батареяи интиқолдиҳандаро иваз кунед.
  • Move the unit away from other strong wireless signals.
Unit stopped working after a period of use.
  • Нокомии ҷузъҳои дохилӣ.
  • Exposure to extreme weather conditions (e.g., direct lightning strike).
  • Overload damage.
  • If basic troubleshooting fails, the unit may require replacement.
  • Ensure the unit is installed in a location that offers reasonable protection from severe weather.
  • Verify connected devices do not exceed the maximum electrical rating.

Мушаххасоти

ХусусиятТафсилот
Рақами моделTNOREM02
БрендСарвазир
Шумораи нуқтаҳо2 (3-prong grounded)
Навъи симSJTW 14/3 Gauge
Навъи васлакиRight Angle, Grounded
ИстифодаДар берун
Макс Ватт1875 Ватт
Макс Amps15 Amps
Макс вольт125 вольт
Max Horsepower1 / 3 HP
Диапазони бесимТо 80 фут
Батареяи интиқолдиҳандаCR2032 3V Button-Cell
Андозаҳои маҳсулот8 x 6.2 x 2.1 дюйм (тақрибан)
Вазни ашё0.01 ounces (for remote control)
Технологияи пайвастшавӣблутуз
СертификатсияҳоNot explicitly detailed, but designed for outdoor electrical use.

Кафолат ва дастгирӣ

Specific warranty information for the Prime TNOREM02 is not provided in the available product details. For warranty claims or technical support, please contact Prime customer service directly. Retain your proof of purchase for any warranty inquiries.

For further assistance, refer to the official Prime webсайт ё бо каналҳои дастгирии мизоҷони худ тамос гиред.

Ҳуҷҷатҳои марбут - TNOREM02

Пешview PRIME SmartOutlets + Remote Control User Guide and Regulatory Information
Comprehensive guide for PRIME SmartOutlets + Remote Control, covering setup, re-syncing, warranty, and FCC/IC regulatory compliance. Learn how to use and troubleshoot your smart home devices.
Пешview PRIME-750B Power Supply Unit: Quick Start Guide and Safety Information
Comprehensive guide for the PRIME-750B power supply unit, covering essential safety information, installation steps, component connection, powering up instructions, and technical specifications. Includes details on electrical safety, ventilation, hardware compatibility, and protection features.
Пешview PRIME 2 Outlet Wall Tap with USB Chargers - User Guide and Warranty
Detailed instructions, regulatory information, and warranty details for the PRIME 2 Outlet Wall Tap with USB Chargers (Model USB05) from Prime Wire & Cable, Inc.
Пешview Маълумот оид ба насб ва бехатарии PRIME SmartOutlets
Дастурҳо оид ба насб, маълумоти бехатарӣ ва мушаххасот барои PRIME SmartOutlets симҳои интеллектуалии берунии аз дур идорашаванда. Дастури танзимот, пайвасти барнома ва мутобиқати танзимро дар бар мегирад.
Пешview Prime TNRCCD21 Plug-in Receiver and Remote Control User Manual
Comprehensive user manual for the Prime TNRCCD21 plug-in receiver and remote control system. Includes setup instructions, operation guide, helpful tips, battery replacement, FCC/IC compliance, and warranty information.
Пешview Prime EZ-Set Indoor Digital Timer TNIDP12: User Manual and Programming Instructions
User manual and instructions for the Prime EZ-Set Indoor Digital Timer (Model TNIDP12). Learn how to program custom on/off times, use preset options, countdown features, and understand safety guidelines and warranty information.