Einhell TC-JS 80 600W Jigsaw Instruction Manual

1. Муқаддима

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TC-JS 80 600W Jigsaw. Please read this manual thoroughly before using the tool and keep it for future reference.

The Einhell TC-JS 80 is a powerful jigsaw designed for various cutting tasks. It features an adjustable 4-position pendulum function and electronic speed control for adapting to different materials. Its design includes dust extraction capability and a rotating saw shoe for miter cuts up to 45°.

2. Дастурамал оид ба бехатарӣ

Огоҳӣ оид ба бехатарии асбобҳои барқӣ:

• Always wear eye protection and hearing protection when operating the jigsaw.
• Майдони корро тоза ва равшан нигоҳ доред. Ҷойҳои бесарусомон ё торик ба садамаҳо даъват мекунанд.
• Асбобҳои барқиро дар муҳити тарканда, масалан, дар ҳузури моеъҳои оташгиранда, газҳо ё чанг истифода набаред.
• Ҳангоми идора кардани асбоби барқӣ кӯдакон ва шахсони дар назди онҳо бударо дур нигоҳ доред. Парешонҳо метавонад боиси аз даст додани назорат гардад.
• Ensure the power cord is not damaged and is kept away from heat, oil, sharp edges, or moving parts.
• Пеш аз танзим, иваз кардани лавозимот ё нигоҳ доштани асбоб, ҳамеша асбобро аз манбаи барқ ​​​​ҷудо кунед.
• Қисми корро мустаҳкам кунед. cl-ро истифода баредamps or a vise to hold the workpiece firmly.
• Аз ҳад зиёд наравед. Ҳамеша пои дуруст ва мувозинатро нигоҳ доред.
• Барои барномаи худ асбоби дурустро истифода баред. Асбобро маҷбур накунед.
• Асбобҳоро бо эҳтиёт нигоҳ доред. Асбобҳои буриданро тез ва тоза нигоҳ доред.
• Тафтиши нодуруст ё бастабандии қисмҳои ҳаракаткунанда, шикастани қисмҳо ва ҳама гуна ҳолати дигареро, ки метавонад ба кори асбоб таъсир расонад, тафтиш кунед.

Specific Jigsaw Safety Warnings:

• Hold the tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord.
• cl-ро истифода баредamps ё роҳи дигари амалии муҳофизат ва дастгирии қисмҳои корӣ ба платформаи устувор.
• Ensure the blade is sharp and suitable for the material being cut.
• Do not touch the blade immediately after use, as it may be hot.

3. Маҳсулот ба охир расидview ва ҷузъҳо

Familiarize yourself with the various parts of your Einhell TC-JS 80 Jigsaw.

Расми 3.1: Умуман view of the Einhell TC-JS 80 Jigsaw.

This image shows the complete jigsaw unit, highlighting its compact design and the attached saw blade with a parallel guide for precise cuts.

• Дастак: Эргономикӣ барои чанголи бароҳат тарҳрезӣ шудааст.
• Гузариш / Хомӯш: Located on the handle for easy access.
• Рақами назорати суръат: Allows adjustment of cutting speed.
• Pendulum Function Selector: Adjusts the blade's orbital action for faster or finer cuts.
• Saw Blade Clamp: Secures the saw blade in place.
• Base Plate (Saw Shoe): Supports the tool on the workpiece and can be angled for miter cuts.
• Порти истихроҷи чанг: For connecting a dust extraction system.
• Роҳнамои параллелӣ: Assists in making straight cuts parallel to an edge.

Расми 3.2: Тафсилоти майса clampмеханизм.

This image provides a closer look at the area where the saw blade is inserted and secured, including the blade guide roller.

Figure 3.3: Ergonomic handle design.

This image highlights the comfortable, non-slip grip of the jigsaw's handle, designed for user comfort during operation.

Figure 3.4: Speed control dial.

This image shows the dial used to adjust the electronic speed control, allowing the user to select the appropriate cutting speed for different materials.

4. Танзимот

4.1. Насби теғи арра

1. Боварӣ ҳосил кунед, ки ҷигса аз манбаи барқ ​​ҷудо карда шудааст.
2. Locate the hex lock/Allen key for the blade clamp.
3. Loosen the screw on the blade clamp бо истифода аз калиди Аллен.
4. Арраро ба теғи cl гузоредamp бо дандонҳо ба пеш нигаронида шудааст.
5. Ensure the back of the blade fits into the guide roller.
6. Tighten the screw firmly to secure the blade. Do not overtighten.

4.2. Adjusting the Base Plate for Miter Cuts

The base plate can be angled up to 45° for miter cuts.

1. Unplug the jigsaw.
2. Loosen the screws that secure the base plate to the main body of the jigsaw.
3. Tilt the base plate to the desired angle (up to 45° left or right). Use a protractor for accuracy if needed.
4. Tighten the base plate screws securely.

Figure 4.1: Flexible cuts up to 45 degrees.

This graphic demonstrates the capability of the jigsaw to perform angled cuts by tilting its base plate up to 45 degrees in either direction.

5. Дастурҳои истифодабарӣ

5.1. Фурӯзон/хомӯшкунӣ

• To turn on the jigsaw, press the On/Off switch.
• To turn off, release the On/Off switch.

5.2. Танзими суръат

The electronic speed controller allows you to adjust the cutting speed based on the material and desired finish.

• Rotate the speed control dial (Figure 3.4) to increase or decrease the blade strokes per minute.
• Lower speeds are generally used for harder materials or for more precise cuts.
• Higher speeds are suitable for softer materials and faster cutting.

Figure 5.1: Speed vs. Exact cutting.

This graphic illustrates the difference between high-speed cutting (for quick material removal) and exact cutting (for precision), which can be controlled by the electronic speed setting.

5.3. Using the Pendulum Function

The 4-position pendulum function controls the orbital action of the blade, affecting cutting speed and finish.

• Position 0 (No Pendulum): For fine cuts, cutting thin materials, or cutting metal. The blade moves straight up and down.
• Positions I, II, III (Increasing Pendulum): For faster cutting in wood and other soft materials. The blade moves in an elliptical motion, clearing chips more aggressively.
• Adjust the pendulum selector lever to the desired position.

Figure 5.2: Pendulum function settings.

This graphic visually explains how the pendulum function alters the blade's movement, from a straight up-and-down motion to an orbital motion, for varying cutting speeds and finishes.

5.4. Истихроҷи чанг

For a cleaner work environment, connect a dust extraction system to the dust extraction port.

• Attach a suitable vacuum cleaner hose to the dust extraction port at the rear of the jigsaw.
• Ensure the connection is secure before operating the tool.

6. Нигоҳдорӣ

Нигоҳубини мунтазам кори дарозмуддат ва кори беҳтарини ҷигсои шуморо таъмин мекунад.

6.1. Тозакунӣ

• Пеш аз тоза кардан ҳамеша асбобро аз розетка ҷудо кунед.
• Барои пешгирӣ аз гармшавии аз ҳад зиёд, сӯрохиҳои вентилятсияро мунтазам тоза кунед.
• Remove dust and debris from the blade area and base plate after each use.
• Use a soft brush or compressed air for cleaning. Do not use solvents or abrasive cleaners.

6.2. Иваз кардани майса

Replace dull or damaged saw blades promptly to ensure efficient and safe cutting. Refer to Section 4.1 for blade installation steps.

6.3. Нигоҳдорӣ

• Store the jigsaw in a dry, secure place out of reach of children.
• Ensure the power cord is neatly coiled and not kinked.

7. Баррасии мушкилот

8. Мушаххасоти

9. Кафолат ва дастгирӣ

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Einhell customer service directly. Keep your proof of purchase for warranty claims.

Давомнокии дастрасии қисмҳои эҳтиётии ИА: 1 сол