Муқаддима
This manual provides essential instructions for the proper installation, maintenance, and troubleshooting of your Genuine Nissan 24080-EA200 Battery Cable Assembly. Please read this manual thoroughly before proceeding with installation to ensure safe and correct usage.
Маълумот оид ба бехатарӣ
Огоҳӣ: Working with automotive batteries and electrical systems can be hazardous. Improper handling can lead to severe injury, electric shock, burns, or damage to the vehicle. Always follow these safety precautions:
- Таҷҳизоти муҳофизати инфиродӣ, аз ҷумла айнак ва дастпӯшакҳои бехатариро пӯшед.
- Боварӣ ҳосил кунед, ки оташгирии мошин хомӯш аст ва тормози таваққуфгоҳ фаъол аст.
- Disconnect the negative (-) battery terminal first, then the positive (+) terminal. When reconnecting, connect the positive (+) terminal first, then the negative (-) terminal.
- Аз тамос бо кислотаи батарея худдорӣ кунед. Дар сурати тамос, фавран бо об бишӯед ва ба духтур муроҷиат кунед.
- Do not smoke or allow open flames near the battery. Batteries produce flammable hydrogen gas.
- Consult a qualified automotive technician if you are unsure about any step.
Мундариҷаи баста
Пеш аз оғози насб санҷед, ки ҳамаи ҷузъҳо мавҷуд ва осеб надидаанд.
- 1 x Genuine Nissan 24080-EA200 Battery Cable Assembly

Image 1: The Genuine Nissan 24080-EA200 Battery Cable Assembly, showing the positive terminal connector, the main cable, and the integrated fuse/junction box.
Насбкунӣ
This section outlines the general procedure for replacing the positive battery cable assembly. Specific vehicle models may have variations. Refer to your vehicle's service manual for detailed instructions.
Воситаҳои зарурӣ:
- Wrench set (typically 10mm, 12mm, 13mm, 14mm)
- Battery terminal cleaner (wire brush)
- Dielectric grease (optional, for corrosion prevention)
- Айнак ва дастпӯшакҳои бехатарӣ
Тартиб:
- Мошинро тайёр кунед: Ensure the vehicle is off and the parking brake is engaged. Open the hood and locate the vehicle battery.
- Disconnect Negative Terminal: Using an appropriate wrench, loosen the nut on the negative (-) battery terminal. Carefully remove the negative cable and secure it away from the battery to prevent accidental contact.
- Disconnect Positive Terminal: Loosen the nut on the positive (+) battery terminal. Carefully remove the old positive battery cable assembly.
- Disconnect from Vehicle: Trace the positive battery cable assembly from the battery to its connection points on the vehicle (e.g., starter, fuse box, alternator). Disconnect all attachment points and remove the old assembly. Note the routing for correct reinstallation.
- Терминалҳои тоза: Use a battery terminal cleaner to remove any corrosion from the battery posts. Ensure a clean, conductive surface.
- Маҷмаи навро насб кунед: Carefully route the new Genuine Nissan 24080-EA200 Battery Cable Assembly in the same manner as the old one. Connect all attachment points to the vehicle components, ensuring they are secure.
- Connect Positive Terminal: Attach the new positive (+) battery cable terminal to the positive (+) battery post. Tighten the nut securely, but do not overtighten.
- Connect Negative Terminal: Attach the negative (-) battery cable terminal to the negative (-) battery post. Tighten the nut securely.
- Apply Dielectric Grease (Optional): Apply a thin layer of dielectric grease to the battery terminals to help prevent corrosion.
- Тасдиқи пайвастҳо: Ҳама пайвастҳоро дубора санҷед, то боварӣ ҳосил кунед, ки онҳо зич ва бехатаранд.
Санҷишҳои пас аз насб
Пас аз насб, санҷишҳои зеринро иҷро кунед:
- Мошинро оғоз кунед: Attempt to start the vehicle. If it starts, check for any warning lights on the dashboard.
- Санҷиши системаи барқ: Verify that all electrical components (lights, radio, power windows, etc.) are functioning correctly.
- Санҷиши визуалӣ: Periodically inspect the battery terminals and cable for any signs of corrosion, looseness, or damage.
Нигоҳдорӣ
Proper maintenance extends the life of your battery cable assembly and ensures reliable vehicle operation.
- Санҷиши мунтазам: Annually inspect the cable for cracks, fraying, corrosion, or loose connections.
- Терминалҳои тоза: If corrosion is present, disconnect the battery (negative first, then positive) and clean the terminals and cable ends with a battery terminal brush and baking soda solution (1 tablespoon baking soda to 1 cup water). Rinse with clean water and dry thoroughly before reconnecting.
- Пайвастҳоро мустаҳкам кунед: Ensure all connections remain tight. Loose connections can cause poor electrical contact and heat buildup.
Мушкилкушо
| Аломат | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Vehicle does not start or cranks slowly | Loose or corroded battery terminals; faulty battery; other electrical issue | Check and clean battery terminals. Ensure connections are tight. Test battery charge. Consult a technician if issues persist. |
| Electrical components not working | Loose connections; blown fuse in the cable assembly; faulty component | Verify all cable connections are secure. Inspect any integrated fuses within the cable assembly. |
| Коррозия дар терминалҳои батарея | Battery acid leakage; environmental factors; lack of maintenance | Clean terminals as described in the Maintenance section. Apply dielectric grease. |
| Cable appears damaged (cracked insulation, fraying) | Wear and tear; physical damage | Replace the battery cable assembly immediately to prevent electrical shorts or failures. |
Мушаххасоти
- Бренд: Ниссан
- Рақами модел: 24080-EA200
- Рақами Қисмҳои Истеҳсолкунанда: 24080-EA200
- Рақами Қисмҳои OEM: 24080-EA200
- Вазни ашё: 9.1 унция
- Андозаҳои баста: 9.96 x 8.86 x 2.05 инч
- ASIN: B00P2PKCAG
- Санаи аввалин дастрас: 31 октябри соли 2014
Кафолат ва дастгирӣ
This Genuine Nissan part is typically covered by Nissan's standard parts warranty. For specific warranty details, please refer to the warranty information provided with your purchase or contact an authorized Nissan dealership. For technical support or further assistance, please contact your local Nissan service center or the retailer from whom the part was purchased.





