1. Муқаддима
Thank you for choosing the Deca Parva 145E Welding Machine. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your new welding equipment. Please read this manual thoroughly before using the machine and keep it for future reference.
The Deca Parva 145E is designed for various welding tasks, offering reliable performance for both hobbyists and professionals. Proper understanding and adherence to these instructions will ensure optimal results and prolong the life of your machine.
2. Дастурамал оид ба бехатарӣ
Огоҳӣ: кафшер метавонад хатарнок бошад. Барои пешгирии ҷароҳати вазнин ё марг ҳамеша чораҳои бехатариро риоя кунед.
- Зарбаи барқ: Welding current can cause fatal electric shock. Ensure proper grounding. Do not touch live electrical parts. Wear dry, insulated gloves.
- Дудҳо ва газҳо: Дуд ва газҳои кафшерӣ метавонанд барои саломатии шумо хатарнок бошанд. Дар ҷои хуб вентилятсияшуда кор кунед. Дар ҳолати зарурӣ аз экстрактори дуд истифода баред.
- Нурҳои камон: Arc rays can burn eyes and skin. Wear a welding helmet with appropriate shade filter and protective clothing.
- Сӯхтор ва таркиш: Welding sparks and hot metal can cause fire or explosions. Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
- Сӯхтаҳо: Hot metal and slag can cause severe burns. Wear protective gloves and clothing.
- Pace Makers: Persons with pacemakers should consult their doctor before operating this equipment.
- Always disconnect power before performing any maintenance or service.
3. Мундариҷаи баста
Қуттиро бодиққат кушоед ва боварӣ ҳосил кунед, ки ҳамаи ашё мавҷуд ва осеб надидаанд. Агар ягон ашё гум ё осеб дида бошад, фавран бо фурӯшандаи худ тамос гиред.
- Deca Parva 145E Welding Machine
- Electrode Holder with Cable
- Замин Clamp бо кабел
- Welding Mask (Handheld)
- Chipping Hammer / Wire Brush
- Дастури дастурӣ
4. Маҳсулот ба охир расидview
The Deca Parva 145E is a compact and robust welding machine designed for various arc welding applications. Below is an image illustrating the main unit and its included accessories.
Расми 1: Deca Parva 145E Welding Machine and included accessories. The image displays the yellow main welding unit, a black handheld welding mask, a black chipping hammer with a wire brush, an electrode holder, and a ground clamp.
Компонентҳои асосӣ:
- Воҳиди асосӣ: Зард вasing with control panel.
- Калиди барқ: Назорати фурӯзон/хомӯш.
- Current Adjustment Knob: For stepless welding current regulation.
- Thermal Protection Indicator: Illuminates when the machine overheats.
- Терминалҳои баромад: Connections for electrode holder and ground clamp.
- Electrode Holder: Secures the welding electrode.
- Замин Clamp: Connects to the workpiece to complete the electrical circuit.
- Welding Mask: Provides eye and face protection from arc rays and sparks.
- Chipping Hammer/Wire Brush: Used for removing slag and cleaning welds.
5. Танзимот
- Ҷойгиршавӣ: Place the welding machine on a stable, level surface in a well-ventilated area, away from flammable materials. Ensure adequate space around the machine for air circulation.
- Пайвасти барқ: Connect the machine's power cord to a suitable grounded electrical outlet. Ensure the power supply matches the machine's requirements (refer to specifications).
- Пайваст кардани Ground Clamp: Заминро пайваст кунед clamp cable to the appropriate output terminal on the welding machine. Securely attach the ground clamp ба пораи кор ё мизи кафшер, таъмини алоқаи хуби барқ.
- Дорандаи электродро пайваст кунед: Attach the electrode holder cable to the other output terminal on the welding machine. Insert a suitable electrode into the electrode holder. The recommended electrode size for this machine is 1.6mm to 3.2mm.
- Таҷҳизоти муҳофизати шахсӣ (PPE): Before turning on the machine, ensure you are wearing all necessary PPE, including a welding helmet, welding gloves, and protective clothing.
6. Дастурҳои истифодабарӣ
- Даргирондан: Switch the main power switch to the "ON" position.
- Танзими ҷараёни кафшер: Adjust the current adjustment knob to the desired welding current. The appropriate current setting depends on the electrode diameter and the material thickness being welded. Start with a lower setting and increase as needed.
- Тайёр кардани қисмҳои корӣ: Ensure the workpiece is clean and free of rust, paint, or grease to ensure a good weld.
- Задани камон: While wearing your welding helmet, gently tap or scratch the electrode against the workpiece to strike an arc. Once the arc is established, maintain a consistent arc length and travel speed.
- кафшер: Move the electrode along the joint, maintaining a steady hand and angle. Observe the weld pool and adjust your technique as necessary.
- Муҳофизати гармидиҳӣ: If the thermal protection indicator illuminates, the machine has overheated. Turn off the machine and allow it to cool down before resuming operation. Do not bypass this safety feature.
- Finish Welding: When finished, lift the electrode from the workpiece to break the arc. Turn off the welding machine.
- Post-Weld Cleaning: Use the chipping hammer to remove slag from the weld bead, then use the wire brush to clean the weld.
7. Нигоҳдорӣ
Нигоҳубини мунтазам дарозумрӣ ва бехатарии мошини кафшерии шуморо таъмин мекунад.
- Тозакунӣ: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
- Санҷиши кабелӣ: Regularly inspect all cables (power, electrode, ground) for cuts, fraying, or damage. Replace damaged cables immediately.
- Пайвастҳои терминал: Боварӣ ҳосил кунед, ки ҳамаи пайвастҳои терминал маҳкам ва аз зангзанӣ озоданд.
- Нигоҳдорӣ: Store the welding machine in a dry, clean environment, away from moisture and extreme temperatures.
- Electrode Holder and Ground Clamp: Keep these accessories clean and in good working condition. Replace if damaged.
8. Баррасии мушкилот
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Ба мошин кувва нест. | Power cord unplugged, faulty outlet, tripped circuit breaker. | Check power connection, test outlet, reset circuit breaker. |
| Machine turns on but no arc. | Poor ground connection, incorrect current setting, faulty electrode holder/cable, wet electrode. | Боварӣ ҳосил кунед, ки замин clamp is securely attached to clean metal. Adjust current. Inspect cables and holder. Use dry electrodes. |
| Thermal protection light is on. | Machine overheated due to prolonged use or insufficient ventilation. | Turn off the machine and allow it to cool down. Ensure proper ventilation. Reduce duty cycle. |
| Сифати пасти кафшер (масалан, сӯрохнокӣ, набудани воридшавӣ). | Incorrect current, improper arc length, wrong electrode, dirty workpiece, incorrect travel speed. | Adjust current, maintain proper arc length, use correct electrode for material, clean workpiece, adjust travel speed. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact customer support.
9. Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Бренд | Дека |
| Номи модел | Parva 145E |
| Рақами қисм | 0400193 |
| Рақами модели ашё | 322006 |
| Ҷараёни кафшер | Танзими беқадам |
| Electrode Diameter Range | 1.6 мм - 3.2 мм |
| Навъи манбаи барқ | Electric (AC) |
| Андозаҳои маҳсулот | 390 x 210 x 280 мм (аз тавсиф) / 24.99 x 16.99 x 29.49 см (аз мушаххасот) |
| Вазни ашё | 14.5 kg (from description) / 14.3 kg (from specifications) |
| Истеҳсолкунанда | DECA |
| Санаи аввалин дастрас | 17 сентябри соли 2015 |
Эзоҳ: Мушаххасоти бояд бидуни огоҳӣ барои такмили маҳсулот тағир дода шавад.
10. Кафолат ва дастгирӣ
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Deca products are manufactured to high-quality standards, and support is available for any operational issues or technical inquiries.
If you require technical assistance or have questions regarding your Deca Parva 145E Welding Machine, please contact the authorized Deca service center or your point of purchase. When contacting support, please have your model number (0400193 / 322006) and purchase date available.
