Дастури дастурамал барои либоси вазнини Omega Rack

Муқаддима

This manual provides detailed instructions for the assembly, operation, and maintenance of your Omega Heavy Duty Garment Rack. Designed for durability and versatility, this 2-tier rack offers substantial storage capacity for clothing, shoes, and various items. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation.

Маълумот оид ба бехатарӣ

• Боварӣ ҳосил кунед, ки ҳамаи ҷузъҳо пеш аз васлкунӣ мавҷуд ва осеб надидаанд.
• Assemble the unit on a flat, stable surface to prevent tipping.
• Do not exceed the stated weight capacity for shelves (600 lbs per shelf) and the garment rod (100 lbs). Overloading can cause structural failure and injury.
• Ҳангоми васлкунӣ қисмҳои хурдро аз кӯдакон дур нигоҳ доред.
• Ҳама пайвастҳоро мунтазам тафтиш кунед, то боварӣ ҳосил кунед, ки онҳо бехатар боқӣ мемонанд.
• Do not climb on the rack or allow children to play on or around it.

Танзим ва васлкунӣ

The Omega Garment Rack is designed for easy, tool-free assembly. Follow these steps carefully:

Рӯйхати ҷузъҳо:

• (4) Vertical Posts
• (2) Wire Shelves
• (1) Garment Rod
• (2) Garment Rod Brackets
• (8) Pairs of Plastic Sleeves (for shelves)
• (4) Пойҳои ҳамворкунӣ
• (2) Screws and Washers (for garment rod brackets)
• (1) Side Hook Accessory (optional)

Қадамҳои васлкунӣ:

1. Step 1: Attach Leveling Feet. Screw the four leveling feet into the bottom of each vertical post. Ensure they are securely tightened. These feet allow for minor adjustments to stabilize the rack on uneven surfaces.

   

   Image: Adjustable leveling foot for rack stability.

2. Step 2: Install Bottom Shelf. On each of the four vertical posts, snap two halves of a plastic sleeve together around the post at the desired height for the bottom shelf. Ensure the arrow on the sleeve points upwards. Slide the bottom wire shelf down over the posts until it rests firmly on the plastic sleeves. Press down on each corner of the shelf to ensure it is fully seated.

   

   Image: Detail of the wire shelving, showing the grid structure.

3. Step 3: Install Top Shelf. Repeat Step 2 for the top wire shelf, positioning it at the desired height near the top of the posts. Ensure both shelves are level and securely attached.

   

   Image: Fully assembled garment rack, demonstrating the two-tier structure.

4. Step 4: Attach Garment Rod. Position the garment rod brackets on the underside of the top shelf, aligning them with the pre-drilled holes. Secure the brackets to the shelf using the provided screws and washers. Once the brackets are attached, insert the garment rod into the designated slots on the brackets. The garment rod is designed to hold up to 100 lbs of clothing.

   

   Image: Garment rod and its mounting hardware.

   

   Image: Garment rod securely installed beneath the top shelf.

5. Step 5: Attach Side Hook Accessory (Optional). If desired, attach the side hook accessory to one of the vertical posts at a convenient height for hanging smaller items like bags or scarves.

Once assembled, ensure the rack is stable. If it wobbles, adjust the leveling feet until stability is achieved.

Дастурҳои амалиётӣ

Your Omega Garment Rack is designed for efficient and versatile storage. Here's how to maximize its utility:

• Clothing Storage: Hang garments on the rod using hangers. The rod supports up to 100 lbs, suitable for heavy jackets and multiple items.
• Shelf Utilization: The two wire shelves provide ample space. The top shelf is ideal for stacking folded clothes, shoe boxes, or storage bins. The bottom shelf is perfect for boots, purses, laundry baskets, or additional storage. Each shelf can support up to 600 lbs.
• Баландии танзимшаванда: The shelves are fully adjustable in 1-inch increments along the vertical posts, allowing you to customize the spacing to fit your specific storage needs. To adjust, remove items from the shelf, lift the shelf, reposition the plastic sleeves, and then lower the shelf onto the new position.
• Вентилятсия: The open wire design promotes maximum air ventilation, keeping your clothing and stored items fresh.

Image: Garment rack in use, demonstrating its capacity for hanging clothes and storing items on shelves.

Нигоҳдорӣ

To ensure the longevity and optimal performance of your Omega Garment Rack, follow these simple maintenance guidelines:

• Тозакунӣ: Сатҳи металлиро бо нарм пок кунед, гamp cloth. For stubborn dirt, a mild soap solution can be used, followed by thorough drying to prevent rust. Avoid abrasive cleaners or scouring pads, which can damage the finish.
• Санҷиш: Periodically inspect all connections, especially the plastic sleeves and leveling feet, to ensure they remain tight and secure. Re-tighten or re-seat components as necessary.
• Ҷойгиршавӣ: If moving the rack, empty it of all contents first. For long-distance moves or storage, disassembly is recommended to prevent damage.

Мушкилкушо

Мушаххасоти

• Модели: GR2-184863-B
• Андозаҳо (D x W x H): 18" x 48" x 63"
• Мавод: Металл
• Ранги: Сиёҳ
• Number of Tiers: 2
• Иқтидори раф: Дар як раф то 600 фунт
• Garment Rod Capacity: То 100 фунт
• Навъи насб: Истгоҳи озод
• Хусусияти махсус: Рафҳои танзимшаванда
• Вазни ашё: Тақрибан 37 фунт
• Истеҳсолкунанда: Omega Products Corporation

Кафолат ва дастгирӣ

For warranty information or technical support regarding your Omega Garment Rack, please contact Omega Products Corporation directly. Refer to the product packaging or the manufacturer's official webсайт барои тафсилоти охирини тамос ва шартҳои кафолат.

Истеҳсолкунанда: Omega Products Corporation

For general inquiries or assistance, please reach out to the seller or manufacturer through their official channels.