Einhell GE-LC 18/25 Li-Solo Power X-Change Cordless Chainsaw User Manual

1. Муқаддима

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell GE-LC 18/25 Li-Solo Power X-Change Cordless Chainsaw. Please read this manual thoroughly before first use and keep it for future reference. This chainsaw is designed for pruning, felling small to medium-sized trees, processing firewood, and cutting construction timber.

Figure 1: Einhell GE-LC 18/25 Li-Solo Cordless Chainsaw. This image shows the complete chainsaw, highlighting its red and black body, the Oregon guide bar, and the chain. The battery compartment is visible, indicating where the Power X-Change battery (not included) would be inserted.

2. Дастурамал оид ба бехатарӣ

Ҳангоми истифодаи асбобҳои барқӣ ҳамеша чораҳои асосии бехатариро риоя кунед, то хатари сӯхтор, зарбаи барқӣ ва ҷароҳати шахсиро кам кунед. Ин дастурро барои гирифтани маълумоти зуд дар даст нигоҳ доред.

2.1 Огоҳӣ оид ба бехатарӣ

• Ҳама огоҳиҳо ва дастурҳои бехатариро хонед. Риоя накардани огоҳиҳо ва дастурҳо метавонад боиси зарбаи барқ, сӯхтор ва/ё ҷароҳати вазнин гардад.
• Майдони корро тоза ва равшан нигоҳ доред. Ҷойҳои бесарусомон ё торик ба садамаҳо даъват мекунанд.
• Асбобҳои барқиро дар муҳити тарканда истифода набаред, масалан, дар ҳузури моеъҳои оташгиранда, газҳо ё чанг. Асбобҳои барқӣ шарораҳоро ба вуҷуд меоранд, ки метавонанд чанг ё дудро даргиронанд.
• Кӯдакон ва одамони наздикро дур нигоҳ доред хангоми кор фармудани асбоби электрики. Парешонҳо метавонад боиси аз даст додани назорат гардад.

2.2 Chainsaw Specific Safety

• Таҷҳизоти муҳофизатии шахсии мувофиқ (PPE) пӯшед including safety helmet, eye protection, hearing protection, gloves, and protective legwear.
• Ensure the chain brake is engaged before starting the chainsaw.
• Арраро бо ду даст сахт нигоҳ доред ҳангоми фаъолият.
• Аз зарбаи такрорӣ огоҳ бошед. Бозгашт метавонад вақте ба амал ояд, ки бинӣ ё нӯги сутуни роҳнамо ба ашёе мерасад, ё вақте ки ҳезум ба дарун мепайвандад ва занҷири арраро дар бурида чим мекунад.
• Do not operate the chainsaw with one hand. One-handed operation may result in serious injury to the operator, helper, or bystanders.
• Пой ва мувозинати дурустро нигоҳ доред. Аз ҳад зиёд наравед.
• Do not use the chainsaw in wet conditions.
• Always ensure the chain is properly tensioned and lubricated.

3. Насбкунӣ ва васлкунӣ

Before operating your chainsaw, proper assembly and initial setup are crucial for safety and performance. This model is supplied without a battery and charger, which must be purchased separately.

3.1 Кушодани баста

Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present and undamaged. If any parts are missing or damaged, contact customer service immediately.

3.2 Installing the Guide Bar and Chain

1. Боварӣ ҳосил кунед, ки занҷир хомӯш карда шудааст ва батарея хориҷ карда шудааст.
2. Loosen the chain cover nuts and remove the chain cover.
3. Place the chain around the sprocket and guide bar. Ensure the cutting edges of the chain are facing the correct direction.
4. Fit the guide bar onto the studs, ensuring the chain fits into the groove of the guide bar.
5. Сарпӯши занҷирро иваз кунед ва гайкаҳоро бо даст маҳкам кунед. Ҳоло пурра маҳкам накунед.

3.3 Танзими шиддати занҷир

The chain tension can be adjusted without tools. Proper chain tension is vital for safe and efficient operation.

1. With the chain cover nuts slightly loose, turn the tensioning screw (usually a red dial on the side) clockwise to increase tension, or counter-clockwise to decrease tension.
2. The chain is correctly tensioned when it can be pulled away from the guide bar by approximately 2-3 mm at the center, but still moves freely around the guide bar.
3. Once tension is set, fully tighten the chain cover nuts.

3.4 Filling Chain Oil Reservoir

The chainsaw features automatic chain lubrication. It is essential to fill the oil reservoir with appropriate chain lubricant before each use.

1. Ensure the chainsaw is on a level surface.
2. Unscrew the oil reservoir cap (black cap near the handle).
3. Carefully pour chain lubricant into the reservoir until it reaches the maximum fill line.
4. Replace and securely tighten the oil reservoir cap.

Figure 2: Detail of the oil reservoir cap on the Einhell GE-LC 18/25 Li-Solo chainsaw. The black cap is located on the top of the chainsaw body, indicating the fill point for chain lubricant.

3.5 Насби батарея

This chainsaw is part of the Einhell Power X-Change family and uses an 18V Lithium-Ion battery (not included).

1. Align the battery with the battery slot on the chainsaw.
2. Батареяро ба слот лағжонед, то он даме, ки он бехатар дар ҷои худ клик кунад.
3. To remove, press the release button(s) on the battery and slide it out.

Figure 3: Illustration of the battery compartment on the Einhell GE-LC 18/25 Li-Solo chainsaw. The dashed outline indicates where the Power X-Change battery would be inserted into the tool's base.

4. Дастурҳои истифодабарӣ

Follow these steps for safe and effective operation of your cordless chainsaw.

4.1 Ба кор андохтани арра

1. Боварӣ ҳосил кунед, ки батарея пурра пур карда шудааст ва дуруст насб шудааст.
2. Engage the chain brake by pushing the front hand guard forward until it clicks.
3. Hold the chainsaw firmly with both hands, one on the rear handle and one on the front handle.
4. Disengage the chain brake by pulling the front hand guard back towards the front handle.
5. Тугмаи қулфи бехатариро (агар мавҷуд бошад) пахш кунед ва сипас тугмаи триггерро пахш кунед, то муҳаррикро ба кор дароред.

4.2 Усулҳои буриш

• Буридани дарахтони хурд: Plan your escape path. Make a directional notch on the side of the tree in the direction of the fall, then make a felling cut from the opposite side, slightly above the notch.
• Лимбинг: Work from the bottom up, supporting the branch to prevent pinching. Be aware of spring-back from bent branches.
• Bucking (cutting logs): Support the log to prevent it from rolling. Cut from the top down (overbucking) or bottom up (underbucking) depending on the log's support to avoid pinching.

4.3 Stopping the Chainsaw

Release the trigger switch to stop the motor. Engage the chain brake immediately after stopping the cut or when moving between cuts.

5. Нигоҳдорӣ

Нигоҳдории мунтазам дарозумрӣ ва кори бехатари арраи шуморо таъмин мекунад.

5.1 Тозакунӣ

• After each use, remove the battery and clean the chainsaw thoroughly.
• Remove sawdust, chips, and debris from the guide bar, chain, and sprocket area.
• Clean the air vents to prevent overheating.
• Таблиғро истифода баредamp cloth to wipe down the exterior. Do not use harsh chemicals.

5.2 Тозакунии занҷир

A sharp chain is crucial for efficient cutting and safety. Sharpen the chain regularly or have it professionally sharpened.

5.3 Нигоҳдории панели роҳнамо

• Periodically clean the guide bar groove to remove accumulated sawdust.
• Flip the guide bar regularly to ensure even wear.

5.4 Нигоҳдорӣ

• Арраро дар ҷои хушк ва бехатар, аз дастрасии кӯдакон нигоҳ доред.
• Пеш аз нигоҳдорӣ батареяро хориҷ кунед.
• Ensure the chain brake is engaged and the guide bar cover is in place.

6. Баррасии мушкилот

Ин бахш масъалаҳои умумиеро, ки шумо бо арраатон дучор шуда метавонед, баррасӣ мекунад.

7. Мушаххасоти техникӣ

8. Кафолат ва дастгирӣ

Einhell products are manufactured to high quality standards and are subject to strict quality controls. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell webсайт.

8.1 Дастгирии муштариён

For technical assistance, spare parts, or warranty claims, please contact Einhell customer service. You can find contact information on the official Einhell webсайт ё ҳуҷҷатҳое, ки бо маҳсулоти шумо пешниҳод шудаанд.

Давомнокии дастрасии қисмҳои эҳтиётии ИА: 2 сол

Истеҳсолкунанда: Nvnceiw

Рақами Қисм: 4501761