Дастури корбарии LC-Power LC-DOCK-U3-III USB 3.0 Dual Bay HDD Docking Station

1. тамомview

The LC-Power LC-DOCK-U3-III is a versatile USB 3.0 dual bay docking station designed for 2.5-inch and 3.5-inch SATA HDDs/SSDs. It provides a convenient solution for accessing multiple hard drives, data backup, and disk cloning without the need for a computer connection. This manual provides detailed instructions for setup, operation, and maintenance of your docking station.

Тасвири 1.1: Пеш view of the LC-Power LC-DOCK-U3-III Docking Station, showing two drive bays and LED indicators.

2. Хусусиятҳои маҳсулот

• Supports two 2.5-inch or 3.5-inch SATA I/II/III HDDs/SSDs simultaneously.
• USB 3.0 interface for high-speed data transfer (up to 5 Gbps).
• Бо USB 2.0 ба ақиб мувофиқ аст.
• Standalone clone function (computer-independent disk duplication).
• LED indicators for power, activity, and cloning progress.
• Plug & Play functionality, no driver installation required for most operating systems.
• Бо системаҳои оператсионии Windows, macOS ва Linux мувофиқ аст.

3. Мундариҷаи баста

Лутфан бастаро барои ҷузъҳои зерин тафтиш кунед:

• LC-Power LC-DOCK-U3-III Docking Station
• USB 3.0 кабелӣ
• Адаптери барқ
• Дастури корбар (ин ҳуҷҷат)

Image 3.1: Retail packaging of the LC-Power LC-DOCK-U3-III, showing the product and key features.

4. Дастурамал оид ба насб

Барои насб кардани истгоҳи докинг, ин қадамҳоро иҷро кунед:

1. Пайваст кардани барқ: Connect the included power adapter to the DC 12V port on the back of the docking station and then plug it into a power outlet.
2. Connect to Computer (Optional for cloning): Connect the USB 3.0 cable from the docking station's USB 3.0 port to an available USB 3.0 port on your computer. If your computer only has USB 2.0 ports, the device will still function but at USB 2.0 speeds.
3. Insert Hard Drives:
   • Ensure the docking station is powered off (ON/OFF switch in OFF position).
   • Carefully insert your 2.5-inch or 3.5-inch SATA HDDs/SSDs into the drive bays. Ensure they are firmly seated.
4. Фаъол: Flip the ON/OFF switch on the back of the docking station to the ON position. The power LED will illuminate.

Image 4.1: Rear panel of the docking station, highlighting the USB 3.0 port, DC 12V power input, and ON/OFF switch.

Тасвири 4.2: Мисample of 2.5-inch and 3.5-inch hard drives correctly inserted into the docking station bays.

5. Дастурҳои истифодабарӣ

5.1. Data Transfer Mode (Connected to Computer)

1. Ensure the docking station is connected to your computer via the USB 3.0 cable and powered on.
2. Insert one or two SATA HDDs/SSDs into the bays.
3. Your operating system should automatically detect the drives. They will appear as removable storage devices.
4. You can now access, read, and write data to the drives as you would with any other external storage.
5. Муҳим: Always use the "Safely Remove Hardware" option in your operating system before disconnecting the docking station or removing drives to prevent data corruption.

5.2. Standalone Clone Function

The cloning function allows you to duplicate a source drive to a target drive without a computer connection. The target drive must be equal to or larger than the source drive's capacity.

1. Тайёрӣ:
   • Ensure the docking station is powered off and disconnected from the computer.
   • -ро ворид кунед Сарчашмаи Drive (the drive you want to copy FROM) into the HDD1 (Source) халиҷ.
   • -ро ворид кунед Диски мақсаднок (the drive you want to copy TO) into the HDD2 (Target) халиҷ.
   • Verify that the target drive has equal or greater capacity than the source drive. All data on the target drive will be overwritten.
2. Start Cloning:
   • Қувваи барқ ​​​​дар истгоҳи пайвастшавӣ.
   • Press and hold the "Clone" button (often labeled "One Touch Clone" or similar) for approximately 3-5 seconds until the cloning progress LEDs begin to flash.
   • Release the button. The cloning process will begin.
3. Мониторинги пешрафт: The LED indicators (e.g., 25%, 50%, 75%, 100%) will illuminate sequentially to show the cloning progress.
4. Анҷом: Once all progress LEDs are solid, the cloning process is complete.
5. Хомӯш кардан ва хориҷ кардан: Power off the docking station before removing the drives.

Warning: Do not interrupt the cloning process. Doing so may result in data loss or corruption on both drives.

6. Нигоҳдорӣ

• Тозакунӣ: Use a soft, dry cloth to clean the exterior of the docking station. Do not use liquid cleaners or solvents.
• Нигоҳдорӣ: When not in use, store the docking station in a cool, dry place away from direct sunlight and extreme temperatures.
• Муносибат: Handle the docking station and hard drives with care to avoid physical damage. Avoid dropping or subjecting the device to strong impacts.

7. Баррасии мушкилот

8. Мушаххасоти

9. Маълумот оид ба бехатарӣ

• Do not expose the device to moisture, dust, or extreme temperatures.
• Танҳо адаптери барқии додашударо истифода баред. Истифодаи адаптерҳои беиҷозат метавонад ба дастгоҳ зарар расонад ва кафолатро бекор кунад.
• Дастгоҳро худатон ба қисмҳо ҷудо кунед ё таъмир накунед. Ҳама хидматрасониро ба кормандони соҳибихтисос муроҷиат кунед.
• Дастгоҳро аз майдонҳои магнитии сахт дур нигоҳ доред.
• Ҳангоми кор вентилятсияи дурусти атрофи дастгоҳро таъмин кунед.

10. Кафолат ва дастгирӣ

LC-Power products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official LC-Power website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact LC-Power customer service through their official channels.

LC-Power Official Webсайт: www.lc-power.com