Aqua Control Solenoid Valve Instruction Manual

1. Муқаддима

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Aqua Control C12033 Solenoid Valve. This electric valve is designed for use in automatic irrigation systems, ensuring reliable water flow control. Please read this manual thoroughly before installation and operation to ensure proper function and longevity of the product.

2. Маълумот оид ба бехатарӣ

• Always disconnect power before installing or performing maintenance on the valve.
• Ensure the operating pressure and temperature are within the specified limits (0.4 to 12 bar, +4°C to 70°C). Exceeding these limits can damage the valve and irrigation system.
• Install the valve in a location protected from direct sunlight and freezing temperatures to prevent damage.
• Use appropriate thread sealant on all connections to prevent leaks.
• Агар шумо ба ягон қадами насб боварӣ надоред, бо мутахассиси соҳибихтисос машварат кунед.

3. Маҳсулот ба охир расидview

The Aqua Control C12033 is a 3/4-inch male solenoid valve constructed from high-quality nylon reinforced with 30% fiberglass, providing excellent mechanical strength and elasticity for high-pressure applications.

Расми 3.1: Пеш view of the Aqua Control C12033 Solenoid Valve, showing the main body, solenoid coil, and threaded male connections.

Figure 3.2: The solenoid valve with its solenoid coil detached, illustrating the two main components. The coil is connected by two wires.

Компонентҳои асосӣ:

• Бадани клапан: The main housing, made of reinforced nylon, with inlet and outlet ports.
• Solenoid Coil: The electromagnetic component that, when energized, opens or closes the valve. It has two electrical wires for connection.
• Барқароркунии дастӣ: A knob or lever (visible on top of the valve) that allows for manual operation of the valve without electrical power.
• Портҳои даромад/баромад: 3/4-inch male threaded connections for integration into the irrigation piping system.

4. Танзим ва насб

Барои дуруст насб кардани клапани электромагнитӣ ин қадамҳоро иҷро кунед:

1. Ҷойгоҳро омода кунед: Choose a location that is easily accessible for maintenance and protected from extreme weather conditions. Ensure the piping is clean and free of debris.
2. Orient the Valve: Identify the inlet and outlet ports. The valve typically has an arrow indicating the direction of water flow. Install the valve so that water flows in the correct direction.
3. Мӯҳри риштаро истифода баред: Apply appropriate thread sealant (e.g., PTFE tape) to the male threads of the valve before connecting to the irrigation pipes.
4. Ба қубур пайваст шавед: Carefully thread the valve into the irrigation system's female fittings. Hand-tighten first, then use a wrench for a final snug fit. Do not overtighten, as this can damage the plastic threads.
5. Пайвастагии барқ: Connect the two wires from the solenoid coil to your irrigation controller's common and zone wire terminals. Ensure all electrical connections are secure and waterproof, especially if installed outdoors.
6. Санҷиш барои ихроҷ: Slowly turn on the water supply to the system and check all connections for leaks. Tighten any leaking connections as needed.

Расми 4.1: Тараф view of the solenoid valve, showing the male threaded connections and the compact design suitable for integration into irrigation lines.

5. Дастурҳои истифодабарӣ

The Aqua Control C12033 Solenoid Valve operates primarily through an irrigation controller. It also features a manual override option.

Фаъолияти худкор:

Once connected to an irrigation controller, the valve will open and close according to the programmed schedule. When the controller sends an electrical signal to the solenoid, the valve opens, allowing water to flow. When the signal is removed, the valve closes.

Амали дастӣ:

To manually open the valve without electrical power, locate the manual override knob on top of the valve. Turn the knob counter-clockwise to open the valve and clockwise to close it. Ensure the manual override is fully closed for automatic operation.

6. Нигоҳдорӣ

Нигоҳдории мунтазам иҷрои беҳтаринро таъмин мекунад ва мӯҳлати клапани электромагнитҳои шуморо дароз мекунад.

• Санҷиши даврӣ: Regularly inspect the valve for any signs of leaks, cracks, or damage. Check electrical connections for corrosion or loose wiring.
• Тозакунӣ: If the valve is exposed to dirty water, sediment can accumulate. Disconnect power and water supply, then carefully remove the solenoid and inspect the diaphragm area for debris. Clean with clear water if necessary.
• Зимистонгузаронӣ: In regions with freezing temperatures, it is crucial to drain the valve and associated piping before winter to prevent damage from freezing water. Consult your irrigation system's winterization guide for detailed steps.

Расми 6.1: Наздик view of a threaded connection on the solenoid valve, highlighting the robust construction and male threading for secure pipe attachment.

7. Баррасии мушкилот

Барои масъалаҳои умумӣ ва роҳҳои ҳалли эҳтимолии онҳо ба ҷадвали зер муроҷиат кунед.

8. Мушаххасоти

9. Кафолат ва дастгирӣ

For warranty information or technical support, please contact Aqua Control customer service through their official webсайт ё фурӯшандае, ки аз он маҳсулот харида шудааст. Барои ҳама даъвоҳои кафолат далели хариди худро нигоҳ доред.