Муқаддима
This manual provides comprehensive instructions for the setup, operation, and maintenance of your SE ELECTRONICS X1 S Microphone System. The X1 S Vocal Pack includes the X1-S microphone, sE ISOLATION-PACK (with pop shield), and a 3-meter microphone cable, offering essential components for high-quality audio recording.
The X1 S features a custom-designed, hand-crafted true condenser capsule, capable of handling high Sound Pressure Levels (SPL) up to 160dB, making it suitable for a wide range of audio sources. The included ISO PACK provides a quick-lock shockmount and a metal pop filter, designed to absorb low-end rumble, footfall noise, and offer superb plosive protection.
Мундариҷаи баста
- sE X1 S Condenser Microphone
- sE ISOLATION-PACK (Shockmount and Metal Pop Filter)
- 3-meter XLR Microphone Cable
Дастури насб
Follow these steps to set up your X1 S Microphone System:
- Attach the Shockmount: Carefully screw the sE ISOLATION-PACK shockmount onto a standard microphone stand. Ensure it is securely fastened.
Image: The SE ELECTRONICS X1 S microphone securely mounted within its shockmount, with the pop filter positioned in front.
- Микрофонро ҷойгир кунед: Gently slide the X1 S microphone into the shockmount's cradle. The quick-lock mechanism will secure the microphone in place, isolating it from vibrations and handling noise.
- Position the Pop Filter: Attach the metal pop filter to the shockmount. Position it approximately 2-3 inches (5-7.5 cm) in front of the microphone capsule. This helps to reduce plosive sounds (e.g., 'p' and 'b' sounds) and protect the microphone from moisture.
Тасвир: Нақшаи наздик view of the SE ELECTRONICS X1 S microphone, showing the integrated shockmount and the metal mesh pop filter.
- Кабелро пайваст кунед: Connect one end of the supplied 3-meter XLR microphone cable to the XLR output on the bottom of the X1 S microphone. Connect the other end to an XLR input on your audio interface, mixer, or preampлифер.
- Apply Phantom Power: The X1 S is a condenser microphone and requires +48V phantom power to operate. Activate phantom power on your audio interface or mixer. Refer to your audio device's manual for instructions on enabling phantom power.
Дастурҳои амалиётӣ
The X1 S is designed for versatile recording applications. Here are key operational considerations:
- Намунаи қутбӣ: The X1 S features a fixed cardioid (unidirectional) polar pattern. This means it is most sensitive to sounds coming from the front and rejects sounds from the sides and rear, making it ideal for isolating a sound source.
- Гузаришҳо: The microphone includes two switchable attenuation pads:
- Панели -10 дБ: Use this setting when recording louder sources to prevent input clipping on your audio interface.
- Панели -20 дБ: Engage this for extremely loud sources, such as close-miked drums or guitar amplifiers, to further reduce the signal level.
- Филтри паст: The X1 S also features two switchable low-cut (high-pass) filters:
- 80Hz Low-Cut: Activates a filter at 80 Hz to reduce unwanted low-frequency rumble, such as HVAC noise or footfall vibrations.
- 160Hz Low-Cut: Provides a steeper cut at 160 Hz, useful for reducing proximity effect (excessive bass boost when close to the microphone) or further cleaning up low-end frequencies.
- Истифодаи тавсияшаванда: The X1 S is highly versatile and recommended for:
- Vocals and Speech
- Broadcasting and Podcasting
- Гитараи электрикӣ Ampосебдидагон
- Drums (overhead or close-miking)
- Video Recording and Streaming
Нигоҳдорӣ
Proper maintenance ensures the longevity and optimal performance of your microphone:
- Тозакунӣ: Use a soft, dry cloth to wipe the microphone body. Do not use liquid cleaners or solvents, as they can damage the finish or internal components. For the pop filter, a soft brush can be used to remove dust.
- Нигоҳдорӣ: When not in use, store the microphone in its original packaging or a protective case to shield it from dust, moisture, and physical damage. Avoid storing in environments with extreme temperatures or high humidity.
- Муносибат: Always handle the microphone with care. Avoid dropping it or subjecting it to strong impacts, as this can damage the sensitive condenser capsule.
- Нигоҳубини кабел: Coil the XLR cable loosely when storing to prevent kinks and damage to the internal wiring. Avoid placing heavy objects on the cable.
Мушкилкушо
If you encounter issues with your X1 S Microphone System, refer to the following common problems and solutions:
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Не баромади садо |
|
|
| Садои таҳрифшуда / буридашуда |
|
|
| Excessive Bass / Muddy Sound |
|
|
| Background Noise / Hum |
|
|
Мушаххасоти
| Номи модел | X1 S VOCAL PACK |
| Навъи микрофон | Конденсатор |
| Намунаи қутбӣ | Якҷониба (кардиоид) |
| Диапазони басомад | 20 Гц - 20 кГц |
| Ҳассосияти аудио | 160 дБ (ҳадди аксар SPL) |
| Импеданс | 1000 Ом |
| Таносуби сигнал ба садо | 87 дБ |
| Сатҳи садо | 16 дБ |
| Pad Switches | -10дБ, -20дБ |
| Low-Cut Filters | 80Гц, 160Гц |
| Манбаи нерӯ | +48V Phantom Power (XLR) |
| Технологияи пайвастшавӣ | XLR |
| Материал | Металл |
| Андозаҳои маҳсулот (L x W x H) | 15.55 x 7.87 x 4.92 инч |
| Вазни ашё | 15.7 унсия (445 Грам) |
| Истеҳсолкунанда | SE Electronics |
| UPC | 819032011201 |
Маълумот дар бораи кафолат
SE ELECTRONICS products are manufactured to the highest quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official SE ELECTRONICS webсайт. Барои ҳама даъвоҳои кафолат далели хариди худро нигоҳ доред.
Эзоҳ: Шартҳои кафолат вобаста ба минтақа метавонанд фарқ кунанд.
Дастгирӣ
For technical support, service, or further inquiries regarding your SE ELECTRONICS X1 S Microphone System, please contact SE ELECTRONICS customer support through their official webсайт ё маълумоти тамос, ки дар ҳуҷҷатҳои маҳсулоти шумо оварда шудааст.
Манбаъҳои онлайн: www.seelectronics.com/support
