1. Муқаддима
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Kaysun Aquatix 8 kW Pool Heat Pump, model KSWP-80 Hn. Please read this manual thoroughly before installation or use to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
2. Маълумот оид ба бехатарӣ
Дастурҳои муҳими бехатарӣ:
- Installation and electrical connections must be performed by a qualified professional in accordance with all local and national codes.
- Ensure the power supply matches the specifications of the heat pump.
- Do not operate the unit if any part is damaged or if the power cord is frayed.
- Ҳангоми кор кӯдакон ва ҳайвонотро аз дастгоҳ дур нигоҳ доред.
- Do not insert objects into the fan grille or any openings.
- Дар атрофи дастгоҳ вентилятсияи дурустро таъмин кунед.
- Пеш аз анҷом додани ҳама гуна нигоҳдорӣ ё таъмир қувваи барқро ҷудо кунед.
- Ин таҷҳизот барои истифода аз ҷониби ашхоси (аз ҷумла кӯдакон) дорои қобилиятҳои ҷисмонӣ, эҳсосӣ ё ақлӣ, ё таҷриба ва дониш надоштан пешбинӣ нашудааст, ба истиснои ҳолатҳое, ки онҳо аз ҷониби шахси масъул барои бехатарии онҳо назорат ё дастур оид ба истифодабарии дастгоҳ дода нашудаанд.
3. Маҳсулот ба охир расидview
The Kaysun Aquatix 8 kW Pool Heat Pump is designed to efficiently heat swimming pool water, extending your swimming season. It utilizes ambient air to transfer heat to your pool, offering an energy-efficient heating solution.
Figure 1: Kaysun Aquatix 8 kW Pool Heat Pump KSWP-80 Hn. This image shows the compact, rectangular outdoor unit of the heat pump, typically white or light grey, with a fan grille on one side and a control panel on the front. Water inlet/outlet connections are usually located on the side or back.
Компонентҳои асосӣ:
- Бухоркунанда: Absorbs heat from the ambient air.
- Компрессор: Increases the temperature and pressure of the refrigerant.
- Конденсатор: Transfers heat from the refrigerant to the pool water.
- Expansion Valve: Reduces the pressure and temperature of the refrigerant.
- Сафҳаи идоракунӣ: For setting temperature, operating modes, and displaying status.
4. Танзим ва насб
Professional installation by a certified technician is highly recommended to ensure safety and optimal performance.
- Ҷойгиршавӣ: Choose a well-ventilated outdoor location, away from direct sunlight, with sufficient clearance around the unit for airflow (typically 50cm on all sides and 100cm above). Avoid enclosed spaces or areas where exhaust air can be recirculated.
- Монтаж: Place the unit on a solid, level base that can support its weight and minimize vibration.
- Пайвастҳои водопровод: Connect the heat pump to your pool's filtration system after the filter and before any chemical feeders. Ensure proper water flow direction. Use appropriate PVC fittings and sealants.
- Пайвастҳои барқӣ: Connect the unit to a dedicated electrical circuit with appropriate overcurrent protection (circuit breaker) as specified in the technical specifications. All wiring must comply with local electrical codes.
- Оғози ибтидоӣ: After all connections are secure and checked, ensure the pool pump is running and water is flowing through the heat pump before turning on the electrical supply to the unit.
5. Дастурҳои истифодабарӣ
Ensure your pool pump is running before operating the heat pump.
- Фаъол / Хомӯш: Use the main power switch on the unit or the control panel to turn the heat pump on or off.
- Танзими ҳарорат: Use the UP/DOWN arrows or temperature setting buttons on the control panel to adjust your desired pool water temperature. The display will show the current and set temperatures.
- Усулҳои корӣ: Your heat pump may have different operating modes (e.g., Heating, Cooling, Auto). Refer to the control panel interface for specific mode selection.
- Гармидиҳии ибтидоӣ: It may take 24-72 hours to reach the desired temperature, depending on pool size, ambient temperature, and initial water temperature. Keep the pool covered when not in use to minimize heat loss.
6. Нигоҳдорӣ
Нигоҳубини мунтазам кори беҳтарини насоси гармидиҳии шуморо таъмин мекунад ва мӯҳлати кори насоси гармидиҳии шуморо дароз мекунад.
- Кабелҳои тоза: Periodically inspect and clean the evaporator coils to remove leaves, dirt, and debris. A soft brush or garden hose can be used. Ensure power is off before cleaning.
- Ҷараёни ҳавои тоза: Keep the area around the heat pump clear of obstructions to ensure proper airflow.
- Химияи об: Maintain proper pool water chemistry (pH, chlorine levels) to prevent corrosion and scale buildup in the heat exchanger.
- Зимистонгузаронӣ: Before freezing temperatures, drain all water from the heat pump and plumbing lines to prevent freeze damage. Consult a professional for proper winterization procedures.
- Санҷиши касбӣ: It is recommended to have a qualified technician inspect the unit annually.
7. Баррасии мушкилот
Пеш аз тамос бо дастгирии муштариён, аз навview ин масъалаҳо ва роҳҳои ҳалли маъмулӣ:
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Насоси гармидиҳӣ фаъол нест | No power; tripped circuit breaker; unit switch off. | Check power supply, reset breaker, ensure unit switch is on. |
| Pool not heating sufficiently | Low ambient temperature; dirty coils; insufficient run time; low water flow. | Ensure coils are clean, allow more time, check pool pump and filter, verify water flow. |
| Рамзи хато нишон дода шуд | Мушкилоти дохилии мушаххас. | Note the error code and consult the full technical manual or contact a qualified technician. |
| Овози ғайриоддӣ | Debris in fan; loose components; compressor issue. | Turn off power, inspect for debris, tighten loose parts. If noise persists, contact service. |
Барои масъалаҳое, ки дар ин ҷо номбар нашудаанд ва ё агар ҳалли мушкилотро ҳал накунанд, лутфан бо мутахассиси хидматрасонии соҳибихтисос тамос гиред.
8. Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Бренд | КАЙСУН |
| Модели | KSWP-80 Hn |
| ASIN | B071YNJDKK |
| Истеҳсолкунанда | КАЙСУН |
| Иқтидори гармидиҳӣ | 8 кВт |
| Ҳаҷми тавсияшудаи ҳавз | 40 - 60 m³ |
| Санаи аввалини дастрас | 21 феврали 2020 |
9. Кафолат ва дастгирӣ
For warranty information, please refer to the warranty card included with your product or contact your authorized Kaysun dealer or the point of purchase. Keep your proof of purchase for warranty claims.
For technical support or service inquiries, please contact Kaysun customer service or your local distributor. Contact details can typically be found on the manufacturer's official webсайт ё дар ҳуҷҷатҳои хариди худ.
